case 446

I have a case 446 I think my hydraulics are wearing bad I think my hydraulic pump is gone whenever I try to pull anything with it I have a loss of power but not a loss of engine is there anyone that can send me a video of how to remove the hydraulic pump so I can get it rebuilt

Case 446 not starting. The wire from the Ammeter is loose but it is so short I can't get to it from front of dash. I am having problem removing the hydrolic oil container in order to reach ammeter. Is it bolted to frame or should it come out when battery andf other appropiate items remove from...

,Just purchased a 1974 case 446,,with mower and snow blade. Joined group to find more info about it,,have had a few wheel horses,,hoping the case will be as just as good as them,,,,,thks

I RECENTLY BOUGHT 8/1/2014 a 446 case. I now have my fouth one . Two and three are sold already . turned a few bucks and some attachments. i completed my cab just tonight . I have already done some neat stuff to it . But am lookin forward to learning much more.Like where is the speed control...

best place to buy j hose for tank to pump on case 446,also anyway to check pump before installing ,thanks lee moore

restoring my446, the things I have done are went to a 18 horse vanguard ,put on a johnny bucket,installed newag.tires and repainted the tractor. reused the 15w40 hyd oil. now I have a problem getting the trastor to pull can this be air in the system. the hy lifts work fine and the tiller runs...

Hello folks, new guy here. My father gave me a case 446 which had no motor on it. I found a craftsman gt6000 with a 20 h.p. on an on it. My question is what to expect when placing this later model engine on this tractor? And if in anyway can the 20 h.p. engine hurt the tractor mechanically? Also...

Anyone know how to adjust pto clutch on Case 446 lawn mower?

Hi! I was recently gifted a Case 446 as a housewarming present. (Bought my first home...father in law is a wonderful man.) I have two acres and a whole lot of yard work to do! Does anybody have any idea of what this attachment is called? I do not have the manual for it and can not find it...

I'm buying a Case 446 to use in my Maine Orchard. I would appreciate any advice fixing it up, as it's got a number of problems! One of my neighbors has a newer Ingersoll 444, which I've lusted after for years, but he won't sell it even though I don't think he ever uses it. I'm hoping the Case...

Just aquired a case 446. Im needing something to pull non running cars in and out of my shop. I have always been warned never to pull cars with a hydrstatic transmission because couldnt handle it. Is this also the case with the 446 or will it handle pulling cars? Thanks for your imput.

I picked up a 446 with a blown up front clutch and the tiller for a good price, but the engine was hurting. I used it for the season, limping it along, but this spring something had to be done. I had a 15 horse "princess auto" engine sitting in the garage for another project, but the engine...

Traded for it a few years ago, and have ABSOLUTELY enjoyed it. Have fixed/mended/tweaked a few things here and there, and its been awesome. BUT, was tooling along yesterday, mowing grass, and she just stopped moving. No Drive, no Attachment Lift. Having NO experience with Hydraulics, but LOVE to...

I have an old 446 that I am restoring. We have the Onan engine working well now, just need mufflers, so if you have a set in good condition, please give me a call. We are having trouble with the clutch adjustments. We took it apart and removed all of the rust (it had sat for a long time) and...

Is there someone who can give me a little information on adjusting the clutch on my Case 446 Garden Tractor? Thanks in advance. Ed

I have a case 446 tractor 80 or 81 model bad engine broke rod. What is the remainder of the tractor worth to some one make offers I am located in Nebraska.

does anyone or can anyone help me find out how to hook up a tiller on the back of this 446.i had a 444 at one time and took it all apart,but did not remember how it went back together.in need a pic, of it . is thr a place to go to to see it.thnks for help if u can.winston

Is there anyone out there who has had any dealings with the 74' Case 446 engine shrouds. I'm trying to change the intake gaskets and replace the carb and it would appear I have to take apart the the whole back end of the tractor to get the engine shrouds off, am I missing something here?? From...

Hello all, I just purchased a case 446 Hydriv. I am wondering if there is a 3 point system available with a PTO for this unit

Looking for a wiring diagram or a Case 446 Tractor

Anyone have advice for the 16hp onan??? Just wondering why it self idles up and down on it's own? Any help would be greatly appreciated!!!

Just wondering if anyone know's why the 16hp onan would be self idling up and down by itself. I'm new to the tractor forum and tractor mechanics altogether.

Hi, all. I Googled Case 446, as I saw one for sale today. Lucked onto this site. I Just missed a 10hp Cub Cadet with mower and snow blade for $400, and I need a rugged (probably older) garden tractor, since my Craftsman hydro cant live with my rugged terrain. I've already had to weld and...

Just picked up this 446 and wondering how to tell the year. I need this info so I can find the correct manual. Thanks.

Hi I've been talking about buying a case 446 how ever I don't know much about them other than they are a good investment. I've yet to see it but I was told it has the hydraulics in the front for the snowblower but not in the back. Is there any way to put hydraulics in the back along with the PTO...

Anyone have this problem? The spare transaxle I was going to swap into my 646, upon inspection, is missing the inner brake drum shaft bushing. It would be hard to remove, no debrie in lube. Did it come from factory missing ? Also can't see a retainer, yet it stays together. There is about an 1/8...

i have a case 446 i aguired when my dad passed away, i got it to run last year but never ran like it should. it kept reving up and down. i,ve since learned the onan motors are bad for this. ( a problem with the govenor). i couldn't get it to start this year, finally found the problem was the...

i have a case 446, i have an electrial problem, there is fire going to all parts, fuel to carb, turns over great but will not start. wondering if it could be ignition switch. i have a wiring diagram but it doesn't show a sealed electrial part under the dash, does anyone know what it is?

no pressure to make fuel pump work. fuel pump is good and bolts to carb on 16 horse power onan engine. whats wrong? roger

Howdy Everyone. Just a quick hello, and some pics of my freshly traded for, Case 446. Any advice, suggestions, or cavaets would be much appreciated.

Hi folks, I just bought a Case 446-77 in fair running condition with a rototiller, 2 way woodsplitter, plow and snowblower. Has an Onan engine. Paid $1350 for the tractor. I felt it was a fair price in veiw of the atttachments that were all in good condition.Tires, chains and wheel weights...

Hi, I am a newbi and I need some help for my case 446 tractor. I have suit case weights for the front and I want to know some more info about them. for example, are they common, expensive, and what people like about them and dislike about them. Any info would be greatly aprishiated. :)

I am trying to find tiller tines for my case 446 tiller can anyone help me out ? thanks

Hey guys im new so please be gentle. I'm not sure how all this works on this site but here it goes, got two case 446's that do not run, what kind of repower options are out there?

I was browesing thru here and noticed that there wasnt much posted about these little case tractors. I know that people up north see these all the time, but there arent nearly as many down south. Anyways here are some pics of it when i got it and some after i spruced it up some. I have put a...

I'm looking for the brackets to mount my factory snow blade to my 446. I just put a Briggs Vangaurd motor on this old tractor and it works great the only problem is that some idiot (me) cut up the old mounting bracket a couple of years ago and mounted it to his 4wheeler but now I want to put it...

it sqeels and dosnt want to move really bad when its hot. i got another used hydro motor and put on a little better. but is it hydro motor or hydralic pump.please help.

Hello. As a new member, I thought I would start off with an good one to ponder.. I have the opportune to purchase an older Case 446 (don't know the particulars yet, guessing mid '70s) for $300. It needs the hydraulic pump replaced. Owner said the 16 hp Onan runs well and looking over the...

Hello. I just purchased a case 446 that needs some trans work. Can anyone tell me if all the trans gears from a 224 will fit in my 446? Thanks.

I need advice and a wiring diagram on how to fix the starting problem. Please send any info to Lionsfan815308@gmail.com THANKS!!!!!!!!!

Hello everyone, I am brand new to this site and am a brand new lawn tractor owner. I bought a case hydraulic lift 446 last year, it has an onan 18 hp and I have no idea what year it is. Last fall I brought it home and rode around a little and it worked great, then it didn`t. It had electrical...

I am looking to buy a garden tractor to mow a 2 acre lawn, and possibly plow a small drive way.I have found a kubota g4200 with low hours and a case 446 (red in color)that is in good shape also. Are these machines similar in capability? Hard to find a plow or blower for these older units?

I have an older case 446 with a single stage blower. I want to convert it to a 2 stage blower. Bercomac makse a blower that fits but only if the engine rotates counter-clockwise when looking from the front. My Case has a Onan B43M that appears to rotate clockwise. Does anyone know if there is a...

I am wondering if anyone has built a ROPS for theirs? Dan

I just acquired a Case 446 tractor from a friend. His Dad bought it new in 1978. The machine has hydrostatic drive, 3 point hitch, mid mount mower, snowblower, cultivator, single furrow plow, rototiller, lawn sweeper and wheel weights. The engine is gas and is a 16 HP onan. The first thing I...

Anyone know where i can get good used parts for this tractor? My dad tore this thing apart to fix something about 15 years ago, and it has yet to be re assembled. its in worse shape now than it was when it was taken apart. The parts im going to need are transmission (gears are rusted frozen)...

Does anyone know anything about used Case 446 garden tractors (or similar)? I think it has a 16 hp engine. It has very large rear wheels. I thought I heard that Case made a solid unit. I am trying to get the year and how many hours are on it. Condition seems pretty good. Thanks Yooper Dave

My 1978 Case 446 stalls and backfires when mowing. It seems like it gets really hot. Once it stalls I have to let it sit awhile before the starter can turn it over. The deck bearings are ok, spark plugs have been replaced. I always keep the motor and the radiator clean. any ideas? I've owned...