3rd function

I have a JD 4720 that I want to add a grapple to. I already have a power beyond on my tractor I use to operate a backhoe. I purchased a 3rd function kit from Summit hydraulics. I was told to connect power beyond port to "P" port on valve from T port go to current power beyond inlet and take...

I have a JD 4720 that I want to add a grapple to. I already have a power beyond on my tractor I use to operate a backhoe. I purchased a 3rd function kit from Summit hydraulics. I was told to connect power beyond port to "P" port on valve from T port go to current power beyond inlet and take...

So as some of you know, I recently bought a new Kioti CK2620H. I need a 3rd function for some attachments and didn't get one installed by the dealer. In researching I wasn't sure if I wanted to go with a "true" 3rd function or a diverter type. Both seemed to have pros & cons, so I decided I'd...

I'm new owner of a low hour 2605h. I'm also new owner of a Lane Shark LS4, which requires installation of WR Long continuous flow 3rd function. I'm not familiar with hydraulic installs, and this install calls for identification of the power beyond port. Is there someone here that can tell me...

I'm chasing down a couple quirks in my FEL, wanted to double check the hose setup. The WR Long website offers little help.

Hi Guys, Just wondering if anyone has used one of these cheaper kits? Looks to me like a knockoff of the summit kit. Hope the link works...

Considering a YT359, and I notice that the 3rd function on the joystick is only one button. Does this really mean it is a diverter valve rather than an independent 3rd function? Otherwise how to you change the flow direction (open/close for a grapple for example). If it is a diverter valve...

Hey folks, So… after 2 hurricanes in as many weeks down here in FL. I need to add a 3rd function to my ‘lil 180. Any one here tried it? I am going to start researching the loader valve first and then look to see if I need to try to run a diverter on it or if I will need to put in a secondary...

I have a 5420 2wd cab with loader. I'd like to add a 3rd function to run a grapple. The cab model tractors with factory loader have levers and not a joystick. See pic Has anyone installed a 3rd function and how(where) did you add the switch. There is a spot for a third lever but its very...

Just had the WR Long 3rd function kit installed on my YT235 and I’m already finding some things that appear to be done incorrectly. If someone has the 3rd function kit installed I need to ask a couple of questions or share some comparison photos.

Was curious what the price for adding 3rd function is. I will be plowing my driveway, and have been using a manual angle plow on my 1026r that I am selling. I’ll be test driving a ck3520 this Saturday

2655 Mahindra for sale- 55HP with loader. 300 hrs total.Shuttle shift gear model. Cab with heat, A/C, Kenwood AM/FM/Bluetooth radio. WR Long 3rd function valve. Skid steer quick disconnect bucket. 45 HP at the PTO, which is independent and button-operated from the dash. Rear tire chains...

W. R. Long, Inc., renowned for its top-notch Live 3rd Function Valve Kits, is thrilled to announce that we are now offering 3rd Function Valve kits directly to you! You can now conveniently purchase the top-quality 3rd function valve kits directly from the W.R. Long online store. As a market...

Hey Everyone. Newby here, 1st post. Did research as best I thought I could on weather anyone has the info on Bad Boy 3026/TYM/Branson 2610 power beyond port locations. I am wanting to DIY a 3rd function kit for my loader. Looking at the summit universal kit, and I'll then have custom hoses...

Has anyone attempted to install a third function kit on 2860 yet? or anything similar? The loader is FLX 2815. Talked to the dealer and they told me was very hard to do and that those who attempted to do it start and bring it to them to finish. Not sure how true that is. The hardest part looks...

Hey fellow tractor users, I’m back with another DIY video this time installing a Summit hydraulics 3rd function kit to use a grapple on my Kubota L3301. The kit was really easy to install and works great. If anyone has questions let me know!

I have a NH powerstar 75. It has a factory installed remote on the loader. Purchased a grapple and unable to get it to open and close. Contacted dealer. They recommended cycling the grapple up and down and rotating it. Tried it for a few minutes, didn’t seem to help. I loosened some of the...