Just bought a new L4802 and starting to use it. Just turned 4 hours on it and during use it makes a loud rumble sound when turning the steering wheel. At first, I thought this could be normal for this machine, but I’m not so sure. Checking opinions before contacting the dealer. Any thoughts...
Has anyone replaced the stock LVA16683 sway adjustment chain with an after market brand? I find this stock adjustment chain on my 2025R difficult to secure with that silly ring. I’d much rather have a turnbuckle with locknut.
I purchased a 2020 JD 2025R, with backhoe, in mid 2020. At the time I had moved to a 2 1/2 acre parcel and had just sold my CT35 bobcat, as I thought I wouldn’t need it anymore. The JD was doing great, as I was only using the loader and backhoe most of the time. I then moved to 5ac in Idaho...
It’s been a while since I’ve posted here and lots of changes since then. However, I’m now running a 2020 JD 2025R which I bought after moving and selling everything off And down sizing... mistake. However, I’m now looking for a roto tiller. I priced the JD 655 at $4100 which should serve my...
I just picket up some of these. It's nice to be able to reposition these D-Rings as needed. They are made by PJ trailer, but this place carries something similar.
Trailer Stake Pocket D-Rings, Johnson Trailer, Colfax Wisconsin
I just installed the 3rd function valve and hydraulics for my grapple. I still have to install the Scorpion joystick button handle and connect the wires (simple), but I did test for flow and the valve works. Here are some pics. I'll post more when I get the handle connected to the joystick and...
OK, so I just installed the 3rd function valve and hydraulics for my new grapple. I still have to install the Scorpion joystick button handle and connect the wires (simple), but I did test for flow and the valve works. Here are some pics. I'll post more when I get the handle connected to the...
Some people have asked about the Skid Steer Quick Attach pins and the fit at the base plate. Here is a link with photos of my new NAI grapple and the fit. I was very happy with the fit.
http://www.tractorbynet.com/forums/attachments/250863-nai-60-grapple-delivered-today-2.html
Guys, after kicking around several brands and different models for the last week or so... and after considering lots of recommendations, I'm going to bite the bullet and go for the Everlast PowerArc 300. More than I need for the moment, but I'll grow into it. I'm impressed with their customer...
For a newbie like me who knows squat about welding, what would you guys recommend that I buy for misc. repairs and perhaps building a few implements... stick, Tig, Mig??? I wouldn't want a top of the line welder, but nothing too cheap either. Thanks
I just ordered the North American Implement (old Gator) 60" light duty single cylinder grapple. I spoke with Stella at NAI (direct) who gave me a great price of $929. The shipping was $256 to a business in California or residential delivery for $311. Anyway, I choose residential for a total...
Can anyone recommend a reputable place to buy an North American Implement Grapple? I've checked their web site and there is little information on where to buy their equipment. I've narrowed my choices down to either NAI or a Wildcat. Thanks :)
Anyone here using a grapple with rear remotes rather than a 3rd function valve on a CT2__? If so, how long are your hoses? I've seen the 3rd function valve advertised for over $800 bucks and can't justify the expense for right now. :)
Hi guys. I'm in the market for a grapple. palletforks.com has some reasonable prices, but I've seen some posts with issues that concern me. One post was an issue with the skid steer "quick attach" and the other had to do with one of the cylinders not closing the top portion of the grapple. I...
Some of the guys on the Bobcat forum posted entries re: leaks in faulty Hydraulic Oil Coolers. These leaks are in the Bobcat CT HST series which are essentially same as the Kioti CK HST series. Have any of you CK guys experienced this problem?
With the few scrapes amd scratches I have on my CT235, I can't see any primer under the paint. A recent battery acid spill also removed the paint from the front lower grill whcih peeled away... also with no sign of any primer.
The primer is obvious on my Kubota. Does anyone know about the...
I have a CT235 and I use it on a hillside. I'm suprised Bobcat did not ship this unit with a no maintenance battery. Battery acid all over the lower grill and battery support plate. It ate through the paint on the lower grill and thebattery support plate. It's easy enough to remove the...
Just picked up this new 2010 diesel dually longbed with extended cab and leather/ bells & whistles for $37,769 OTD IN Salina, Kansas at Long-McArthuer Ford. Best deal I found so far. Not even broken in yet and I'm geting 16.2 mpg
Has anyone had experience with this specific trailer. I love everything about it. The only concern I have is that it is so low to the ground... about 12" at the rear. That makes for a lot of dragging in and out of gas stations with dips at the driveways.
Guys,
Just bought a new Bush Hog Heavy Duty 72" box blade with floating rear tailgate. It weighs 640lbs and I bought it mostly for rear ballast. I know Bobcat calls for 880lbs ballast for max lift, but this will have to do for now.
BACKHOE HYDRAULIC QUESTION
Does anyone have a backhoe attached to a CK35,30 or 25 using the standard selectable A - B rear remote hydraulic connections? I have a Bobcat CT235 (CK35) and my dealer told me that this is the hydraulic configuration for the standard Bobcat (Rhino) backhoe. He also...
BACKHOE HYDRAULIC QUESTION
Does anyone have a backhoe attached to a CT235, 230 or 225 using the standard selectable A - B rear remote hydraulic connections? My dealer told me that this is the hydraulic configuration for the standard Bobcat (Rhino) backhoe. He also said it's good for Top &...
A friend told me that Pat's Cat 1 model has too much play when the hooks are lifted up to connect with the standard 7/8" Cat 1 pins; not a tight fit. Has anyone experianced this? Are bushings required?
Hi Guys. I know that Kiote makes the new Bobcat CUT's (with modifications), but does anyone know what company makes the Bobcat 7TB backhoe? Is it Kiote?
I just ordered the Bobcat CT235 and I'm just doing some homework before ordering the backhoe. Thanks