Search results

Does anyone have any experience with the F series with single digit? I have a chance to pick up an F 6. It appears to have a shuttle shift. Any info would be helpful.

This is a picture of a YM1300D using a pond scoop. I promised a member I would post it for him.

A few m,onths back someone posted a link to the mods needed to staretup a new Jinma Chipper. If he sees this , please repost the link for us.

A few months back someone had posted his home page with a detailed article on the mods need when starting up a new Jinma 6 chipper. If he sees this please repost the link for us.

I am trying to match an Iseki built in 2003 with a Massey CUT. It has 24 engine hp. 12 speed shuttle shift. Does anyone know what Massey was built in 2003? The 12XX series is close but the data I have only goes to 1999.

I am trying to match an Iseki made in 2003 with the US model. It is 24 engine hp 12 speed manual with a shuttle. The older 90s model it is close to is a 1230. What model was built after that in the 24+or- hp? 14xx??

I am putting a YM1700 back together. Does anyone have the Specs for bolt torque on it?

If anyone knows of a thread like this let me know and I'll go there. If not, I am trying to help a guy with a YM1700 that the first symptom was getting hot. It never overflowed the catch bottle. After it had done that several times it started to smoke blue out the exhaust and the muffler is...

My cousin lives several hundred miles from me. His YM2002D has developed a problem with the three point. It wil go up but not down. He has checked the valve under the seat and it is open. Can anyone out there give me some pointers to relay to him???

I lost the address for the guy looking for 6x14 tires. I found the Bridgestone # 344-362B

I lost the address to a guy looking for 6x14 tires. The Bridgestone number you are looking for is 344-362B.

Does anyone out there have a parts manual they would copy or a source to get one?

I just got a call from a man that called John Deere for a head gasket on an 850. They told him they didn't have any parts for it, to call a Yanmar dealer. That is a new twist to the parts situation.

I am mounting a Great Bend / Bush Hog mid mount loader on my TA 270. If anyone is interested let me know and I'll post some pictures and what had to be done to make a Massey 1250 mount fit up. It can be done ,but requires some cutting and fitting.

I have a TA270. I have the Massey parts book for the MF1250 and the Iseki book for the TA250. I have also checked the MF1145 against the TA270. Does anyone know whick Massey is the closest? I want to put a loader on it. The 1250 and 1145 take different mounts. By the parts books they look the...

There is an Iseki 140 on Ebay. It looks like a TU140, but there isn't any TU on the decal. It is a Landpride. It is being advertised as a 2000 model. I was always under the impression that the TU140 was around a 1988. I mailed him and he says there is a date stamp with 1999 on it. Does anyone...

Does anyone out there have or know where to get a T150 parts manual. I have a customer with one that went POP and now won't move.

Can anyone help with a mount number for a Koyker to fit an F17D? I know they have one, but it isn't listed.

Check out the John Deere 4110 with loader for $3400 on Ebay. Item number 3661935135. When I mailed him to take it he said it was in the Netherlands. All I have to do is send him the $3400 and he will send it right out freight paid. Duh!!! I tried to report it but Ebay says the item number isn't...

There is a virus being sent by e-mail. It comes in different forms. They all say that the message can't be sent by mail and is in an attachment. DON'T open it. It will wipe out your hard drive. I hope it in't too late I have already received 3 of these messages and came within a half second...

There is a YM350 on Ebay. It just doesn't fit the mold. The YM with 3 digits, when it looks like an F series. The funny air filter. The steel handles on the fenders. 5 hrs ???? Sectioned side covers. It looks like Frankenstein. Does anyone know the story of this model?

I am trying to find teeth to add to the bucket on my Kobelco 25SD mini excavator. The originals are VISS with Mitsubishi and Seiko E400 on them. Does anyone know where to get them? I would like the new ones to match the existing if I can.

I have a YM240 in the shop that has the clutch adjusted to no free play and yet it still grinds going into a gear. Any ideas? My thoughts are leaning towards a clutch plate with loose sections or a broken spring dragging.

I just took in a US YM 240 for repairs. I can not get over how we Americans abuse our equipment. The Japanese know they aren't going to keep theirs very long but still take good care of them. This US model is a real turd. The owner told me on the phone it was in great shape for its age. Well if...

I guess I'll stir it up if no one else will. What is going on with this guy named Wallace being the only one able to import Yanmars? I have just heard bits and pieces. Can anyone tell us what is really going on? How can you slap a Zen Noh label on a tractor that was manufactured a Yanmar and all...

I am trying to find a source for glowpugs to fit my TL2100. Can anyone help? Even a good number to use would help. The JKC number on mine won't cross to any other brand so far.

Check out the " New " ???? Iseki on Ebay. It sure makes it hard for an honest dealer when this happens. Is there any way to add the proper feedback if you don't buy the item?

It has finally happened. My competion has sent his customer to me to tell him what is wrong with his tractor. If I don't help I become the bad guy. So, help. His 3 point goes all the way up and past the stop every time he starts it no matter where the control is set and it won't go down when...

Does anyone know what years the TL series was made?

Len I was looking through a Yanmar page and saw Yanmar tractor dist. listed. Your name came up. How does that work? Do you sell Yanmar tractors with Yanmars support? There was a separate listing for parts dealers.

Does anyone have any experience with GPR? My son and I are researching it to see about starting a business using it to locate for excavators. It can "see" plastic pipe,rebar,voids,old ditch lines, sewer taps down to 15'. Does it sound like something any of you would like to have done for you...

I have been made aware of the fact that the monitor of this board. NOT Rodger or Muhammed. Has been telling dealers not to solicate business on this board. I am very small and don't normally do this,BUT the ones that do are offering things people are looking for. If the dealers weren't here you...

I was just kicked off of another board for posting this board's address and refering a tractor shopper to visit DP Equipment and see some Yanmars. I just want to thank Muhammed for being generous and letting all the information flow not just what profits him. I would post the other board but I...

I just got a parts manual for a Massey MF1250. I have been comparing items to the TA270 I have. There are more parts that are the same than are different. The motor is hard to tell. The TA 270 manual is in route. I will be curious to see if any numbers are the same. FYI I think the Masset key...

I have determined that my Iseki TA262 has the same engine as the Massey 1140 and 1145. I haven't been able to find out anything about them though. Does anyone out there have any info or manuals on them? If I could get a few pages copied out of a parts or service manual it would answer a lot of...

I have a YM2210B that starts way to hard. Once it hits it will purr like a kitten. At running rpm it has good power. It will smoke to high heaven while trying to start. It has what seems to be good compression, as hard as it is for the starter to turn it over. It has zero blow by while running...

I just traded for a Ford 7.3 diesel. While reading posts at a club like this for them I came upon a condition called " wet stacking" It is caused by letting a diesel idle for more than 10 minutes. The way they talked it does quite a bit of damage to a diesel. Does anyone want to explain how...

I have an Iseki that is supposed to be based on the MF1240. It has 31hp, 4 upper gears and 4 lower and shuttle shift. Does anyone out there have a Massey with those specs? Any info would be appreciated.

Let's see if this topic will be less heated. Does anyone have any information on the dock workers strike? My importer just told me the tractor I had expected to pick up in two weeks will probably not be available until the first of the year. That SUCKS.

Has anyone else seen the " factory rebuilt " tractors being sold on Ebay? That suggests that Yanmar is rebuilding them. Heck, I guess I have a tractor factory in my garage. I just wonder why they needed " rebuilt ". The ones I have seen didn't need much more than an oil change and a seat cover...

I have six 5x14 front tires left if anyone needs them. I am getting $55 each and freight. Kay's Supply PO Box 5 Carterville IL 62918 reeds@midwest.net 618-527-4145

I have had repeated customers ask if a Yanmar could pull a 14" single bottom plow. Can anyone with experience tell me how small / large of a Yanmar 4x4 it would take to pull one? I want to give good advice. Thanks

Can anyone help me with getting started changing the rear axle seal on a YM2210? I have always went in through the PTO cover on other tractors, but this one has the shifter up on the transmission. I assume you have to pull the shifter first. Is it easier to go through the PTO or by taking the...

My neighbors YM2500 started belching black smoke and he found 1/4" of oil in his overflow bottle. Does anyone have any ideas? I have heard of water in the oil but never the other way around. A head gasket usually does'nt have oil in the water but makes it rusty looking. Any ideas will help.

The attached picture is of my F22D with industrial tires on custom wheels.

I know it is common knowledge that JD 303 is the hydro-trans fluid of choice. My question to the old heads is, what is the difference between the TF300 and the TF500 that two different tractors I have says to use in their transmissions. There has to be some difference. I know that when I change...