Search results

Great to know, I always have some teflon tape at hand as I live in a very old house. Never a question of if I will need it, just a matter of where. I have in the past used to make up for over sized screw holes in wood. Thanks again.

Thank you for the info, it. is much appreciated.

Howdy folks, I have a quick question about the FEL joy stick on my RK24. It seems that about once every year, I have to tighten up the the nuts that hold the joy stick to the actuator assembly. Has any body ever applied lock tight to the threads before installing the nut to prevent them from...

I appreciate the information, thank you for taking the time to help out.

Thanks for info.

Curious if anyone here has had to prime their RK24 due to running out of fuel, I am wondering what steps would be required to accomplish priming. I guess that I am either not understanding and or missing it in the manual, I have had people tell me that newer tractors should be self priming...

Thanks for the post, I will be doing my fall check very soon, I will give special attention to this are as it appears more than one 24 owner has had this issue.

Yes Sir, Great little tractor, terrible service with undertrained, unconcerned individuals. They probably hire the people that no other tractor service company will hire, I'm sure that they pay is commensurate with skill/ability. Every time I have needed something (which is seldom) they do not...

Let's not forget, a large part of the problem is that is the decimation of our manufacturing base in tithes country. We are dependent upon other countries for common goods in all facets of our society, unfortunately China is the primary source for much of our goods. Between our governments rush...

Glad to be of help.

When I was a kid my step father was a traveling salesman that did demo's for hustler, he would trailer a Hill sider out to potential customers and demonstrate it's capabilities for them. He would often end up going to Dam's and show them how it could safely mow the...

For those that have interest in the outcome of my issue, it seems that the WD40 soaking did the trick, Both the lever and the shift mechanism work freely now easily moving through he range of motion.

Thank you for the advice, did not seem to help in my case, but I certainly appreciate your help. Regards.

Decided to try spraying down the linkage and. shaft where it enters into the box, let set for a while, this seems to have freed it up to a great degree. Hoping this will be the fix, I guess just a bit of corrosion from sitting and not using the 4 wheel drive lever much at all.

The 4 wheel drive lever on my RK24 is flexing when trying to engage 4 wheel drive, but does not go into 4 wheel drive.

I am wondering if anyone else has had the FEL Joystick become very lose and floppy in one of the 4 directions, working at moving felled tree sections to the burn pile, at the end of the day refueling tractor and doing a walk around check I found that indeed my joy stick is floppy in one...

Folks, I want to take a moment to give a big thank you to all of you for being so helpful and constructive with said help, rather than taking advantage of those whom know less and haranguing them with rude or abusive comments to the man you roll up your sleeves and do as much as you can to help...

Well guy's here's the story, Last time I started my RK24 was 4 day's ago and everything was as normal, after moving the tractor into its new home ( a Heavy Duty Sheltertech SP 18x20x11) along with a couple of attachments as well as my zero turn mower. This evening I went out to start the...

Anyone have advice on cleaning water separator, it appears to be located in front of the radiator on the RK24, I have never done this type of procedure before and the manual is vague unless I am missing something. Words of wisdom appreciated.

I have a question that I am hopping one of you may answer it is as follows, when my loader is raised off the ground and I turn off the tractor within 20 or so minutes the forks begin to gradually dip towards the ground it appears to be the forks and not the boom valves, my question therefore is...

I went out to do some work today and started my RK24 as normal Glow plug then start, normaly it is pretty smooth while warming up but today it shook and rattled as though it were going to come apart and would not respond to throttle, after thereto five minutes it smoothed out and acted as...

Hi guy's I am new to the forum and new to tractor ownership as well and being so I have what is probably a silly question, I have a new RK24 with backhoe and loader and it has performed all tasks that I ask of it very well to the point that in the three weeks of ownership I now have 52 hours...