Search results

I have never seen grease overflow off mine and I have pumped a lot in

Mine seemed to be loosing coolant the first 50 hours. Since then the level has not changed

Transmission/hydraulic fluid on a 110tlb. The book recommends regular hy-gard but dipstick says low viscosity? I see the temp ranges in the book, but what’s everyone using and why does dipstick say low viscosity?

On the dash of a John Deere 110 tlb I see a mfwd light, but it does not come on when engaged. Bulb is good but don’t see a switch on the linkage. Can anyone confirm is it’s supposed to come on in 4x4. Thanks

Can front aux hydraulics be added to an 04 John Deere 110 tlb. It has 7 function backhoe but no lines to front end loader ? Any help is appreciated

Stock blades and a rubber flap behind deck for striping kit. I do have the modified blade bosses and Oregon g6 waiting to go on

Looking to replace factory zd1211 tires. 26x12-16. Looking for something aggressive for traction. Don’t want to fill the tires for weight because I’m putting bagger on it. Possibly bar tires but it’s not common size Thanks

So I was messing around with my zd1211 72 side discharge. I wanted to reset deck level adjustments. Going by the book it says to set to 3 on dial and set your blades at 3” and level side to side and front to back. At setting 3 with fine tuning bolts backed all the way out I can only get...

For reference, this is Kubota kit but they are halogen

Here’s is pigtail by fuel tank. One on each side. Hot all the time with fuse installed

So on my mower, The pigtail under the seat (bullet connectors) is a red with blue trader and ground. This has 12v all the time The white connector on each side of radiator down by bottom of fuel tanks powered up when I put a fuse in the “work light” location. So Kubota must make a...

I know this has been discussed before but has anyone come up with a better blade for zd1211/1511 72” side discharge? ACS blades just don’t do it for me

So I have a brand new zd1211. I thought one fuel cap was leaking so dealer gave me new cap. Come to find out it’s leaking at seam between filler neck and tank. Only really notice it when machine is tipped up in service position it really pours out that seam. Anyone else have this ...

What weight oil comes from factory in zd1211. My dealer says it’s 10w-30. Is that correct? Wanted to get oil for my first change but wasn’t sure since books says either 10-30 or 15-40 Has anyone swapped to synthetic? I swapped over in my scag with 3cyl diesel with great results...

I purchased a new zd1211. Cuts great but I’m just not impressed with the striping and “lift” from stock blades. Doesn’t seem to distribute thick grass or have the airflow/suction in the deck like my other diesel scag. Are there replacement blades that fit the new acs deck for 72” s/d...