Search results

I did like bill9068, I got a 3 pt carryall for my Ford 4000. Strap down the tank and riding mower battery and the boomless broadcast sprayer does a great job for me from Northern Tool

Great looking rig! Welcome to the club

My daily view sucks, suburbia...by I did include some pics out the back door of my 20 acres in Mid MO. Some are from the back porch, some from the deer stand, and some some after the hunt:D

These are all from my little farm in mid MO. The one with the maple tree was taken during a break while dragging out a deer I shot. If you look to the right of the trunk you can see the rack of the deer. Didn't know it was in the pic until after I took it. The other two pics are from the...

Had some success with my gun this time. He was chasing some does and came in to the grunt call. Been a great year on my little 20 acres

I am blessed to own 20 acres in deer paradise of Central MO. Shot this guy with my bow on Nov. 1st. Hoping to come across some of the others that I have on trail camera

Anyone else a member of this program?

Here is my loafing/tractor shed. Need to expand it. Was too small before I built it

This past week I went up to my little 20 acre hunting paradise and put in a couple of acres of food plots. I brush hogged some trails in the woods that needed maintenance, then disced and dragged the plots after seeding. Discing seems to be a decent load on the tranny. Without a temp gauge...

I installed a repair stud on the starter, and finished my tractor shed this weekend.

Sunday, I did a little discing and seed bed prep before seeding a food plot. Nothing to exciting, but exactly what I got my tractor for.

Model is 41105 not 44105. Only thing is that a row crop wide front would look like this

I already had the ATV sprayer, so i added so attachment points for the straps and ATV battery. My machine is main a food plot toy for deer.

Here is the end of my axle and the square plate. This axle is a 24 and 1/4 in long

OK, I got the nut off and the gang apart. So it appears the busted part is the bearing spool 7-1/2" Ribbed Bearing Spool The blades, the bearing, and the spacers all have square holes, I have a round axle. Is that right? Seems like I need a square axle to go with all of these square holed...

This past weekend I was taking my first swing at legit food plotting using a tractor and 3 pt disc for the first time. One of the front gangs of the disc needs repair. A best I can see the bearings need to be replaced. the first logical step seems to be removing this axle nut. Problems is...

My 1963 Ford 4000 Row Crop with the Select-O-Speed transmission. This is how we found it, mid re-boot and on my place a couple of weeks ago. Had been sitting for many years.

Went out on my '63 Ford 4000 6V tractor today and was going to run it a little bit and fiddle with the idle adjustment. I had run it a few times and nothing seemed odd. Then I went and cranked it again. Didn't start right off the bat and I let off on the starter button...keeps on cranking...

Updated photo. Finishing up some paint, and minor details. Have to troubleshoot the generator light, hard to tell which terminal is which on this old genny. Need to get the as much oil out of the steering gear box and add some lube in there to keep the gears lubricated. But just about...

Got a new to me tractor and brush hog. The locking spring loaded pin on the couple that slides onto the PTO shaft was jammed. I had to drill the top of the pin and drive a screw into into and whack the yoke while holding the screw in the pin. Got it pulled out and spins freely. There was a...

Sorry here is the pic.

1963 Ford 4000 Gas Row Crop S-O-S What is this plug? Under right heel under floor board. Tranny has a level check plug further forward in front of my right foot. Hyds have a dipstick Differential has a level check plug on rear left side of differential house(At least thats what I think it...

Ok just want to make sure I am on track with fluid drain and refill locations. 1)Pic of the big round plug with the square lug shows the differential fluid fill, right under right butt cheek 2)Underneath looking towards the rear of the tractor shows the hydraulic drain plug, then further back...

Kirk, Thanks for the pic. I was able to track one down on eBay for like $35. Not the prettiest but should be serviceable. . Even searching for the 801 air cleaner didn't yield many results. Got the main jet/nozzle out of the carb last night. Pretty certain that was the problem with...

Gentlemen, I am struggling to find what I need for the air cleaner assembly. I have the J Tube, but I keep seeing air cleaners that look like this . I cannot figure how this connects to the carb via the J tube. The hood has, the air funnel. Just not sure what the heck this is supposed to...

OK, after lots of reading I have determined that the top, smaller hole, is the air vent that leads to several bleeder holes in the nozzle. The lower, larger holes in the terminal end of the idle fuel passage, and after the gas passes through this it enters the idle jet and will then be mixed...

What these two small holes in the my carb? I am suspicious of these two as the source of my idling problem. The rear one with the brass fitting, seems to have a 2nd smaller orifice inside, and when I shove a needle into it as far as it will go it come out dirty, think there is some shellac...

OK, I am trying to figure out why my tractor will not crank via the push to start button. Here is what I know and have done. Yes the tractor Runs. I hot wire the tractor from a battery + to the ignition coil and starter nut, and batter (-) tractor frame and it starts The push button...

OK, I can get a pretty cheap tool at Harbor Freight and pre-made tube from Napa.

OK, Here is a picture of what I have.... So you bend your own fuel lines? I can appreciate that, but that really isn't something I can pull off. I just need to determine the correct part # for my rig.

OK, after some reading I think I got the sheet metal removing figured out. We need to take the two large phillips head bolts out where the side panels attach the the dash cowling. See Pic Then the two bolts inside that are basically behind the air cleaner, these also attach the the top hood...

Here is a diagram i found, this is how i assembled it, but used the needle retaining clip

Update, I got the gasket for the main load adjustment needle sorted out. I also got the spring sorted out. Can I use the spring and the needle retention clip as shown in these photos. Not sure I should have the clip and spring?

OK, First go at tractors and carburetors. I disassembled the carb, and didn't keep track of how things came apart as well as I should. I got the carb cleaned up and a the rebuild kit has arrived. Here are some questions. Reattaching the float, there is was a small spring (see 2nd pic)...

Here is a 1963 Ford 4000 S-o-S. My buddy and I are getting this from a co-worker of his in exchange for some labor around her place, and possibly a little cash. We were at $650 for the tractor, brush hog, and blade. Then she started listing stuff she would like us to do in exchange, so the...

My friend and I just got a 1963 Ford 4000 gas, narrow front tractor. The tractor belonged to a co worker of my friend, and we are going to be doing a few projects around her house, and maybe toss in a little cash for the tractor. It comes with a 5ft Howse brush hog, and 5' blade. I have 20...