Search results

Sold

Sold

I have a NOS subframe for the grand L 40 series that fits the BH90 or 92 backhoe. The main components are there and some of the other bracketry, you may need additional brackets depending on model and if it's a cab or rops model. I do have a box of hardware for it also, these were stored...

SOLD

Looking at building a shop at the new house, plan was to do a red iron building, but with current pricing I don't think it's an option. Was looking at the Strat-O-span steel framed building and they appear to fit my application and cost about 20k less. Does anyone have first hand experience...

Does anyone have any information on these? Was looking at one but can't seem to find any specs doing search other then digging depth. Would like to at least know the weight to see if my Case can handle it. It looks pretty neat being an extend-a hoe, just wondering if its an orphan, there's no...

Does anyone have a picture or installation manual for the BH92 subframe on a early model GL3240 open station? I recently bought a number of parts from a Kubota dealer that was closing down, one of the things I got was a NOS BH92 subframe with an assortment of brackets for the GL40 series...

Looking to get a larger blade for the L3240, want something heavy enough for plenty of counterweight with my unloaded turfs. Current choices are a local used Woods SR25HD or ordering a EA extreme with swinging tailgate. The woods nice blade but worried it might be a bit much for the tractor...

In Dec. I bought a used L3240, also picked up a ditch bank flail mower. The tractor didn't have any rear remotes so I checked with the dealer first as they the remotes are pretty integrated on this model, unless you just want to bolt a valve to the ROPS, which I didn't want to do. Dealer...

Was perusing Facebook marketplace the other day and came across some large auger bits for my PHD, figured now that I have a larger tractor I could actually run them. Was able to get a 24" and 18" for what I consider a pretty good price. They have seen a little wear but nothing bad, found a name...

Thought it might be interesting to see why people ended up buying a Kubota. I was at the dealer getting pricing for some parts on my tractor and got into a conversation with the sales guy about how I ended up with my Kubota's I bought my first Kubota product in '94, a W5021sc walk behind mower...

I just upgraded from a B2620 to a L3240 but because of the size jump a lot of my implements are now too small so I'm looking to upgrade those as well. Mainly looking for a larger box blade and rear blade, I've looked at the "recommended" sizing in the manual but I know from experience that...

I love my B2620, but lack of position control and loader lift height are getting old. I found a clean looking L3240hst with the la724 loader for what I consider a decent price, has just over 800hrs on it but has been dealer maintained and mostly was used to maintain the gravel roads in a...

I've had my Viking 3350 helmet for about 7years, it's been a fantastic helmet but the headgear really lets it down. The adjuster would not hold shortly after i started using it and I ended having to zip tie the adjuster to keep it together. Was looking at replacment helmets the other day and...

I have a need for at least 3 different gas mixes for my mig and don't feel like having 3+ different dedicated bottles laying around when some aren't used very often. My common mixes are 75/25, 85/15-95/5 and straight argon for the spool gun. I was planning on just using one of my 330 for...

I recently purchased a Nissan forklift, was able to get a good deal due to hyd. fluid entering the crankcase. I pulled the pump off and sure enough the front shaft seal lip was partly flipped over, I am going to pull the pump appart to inspect to see if the overpressure at the front shaft is due...

Well I've been putting off posting my build but Big Barn finally convinced me! Just as a precursor, the shop has already been built but suggestions are always welcome so hopefully others can benefit. A couple years ago I got the go ahead to finally build my shop, I've been working out of the...

Picked up a large drill press the other day, wasnt really looking for another one but this one showed up on Craigslist cheap and nearby so I figured it was worth looking at. The ad had a couple pictures but not much info, could it really tell what make/model but it looked to be a decent size...

So I'm getting ready to build a cnc plasma table, the original idea was to pick up a mechanical torch for my Hypertherm 45 and use that until I can upgrade. While poking around CL I found an excellent deal on a Hypertherm PM105 and should be picking it up tomorrow. Looking around I see very few...

Going to look at a early '80s Case Davis 30+4 tomorrow, does anyone know what it weighs? It has a 48in depth trenching chain, backhoe/blade, and the boring pto. Trying to figure out if I have to borrow a heavier trailer as my 10t is out of commission at the moment. Can't find anything on this...

Just picked this up from a surplus auction, wasn't looking but always wanted one and the price was right. Need to clean it up and replace a few foam seals that's are deteriorating and get a new filter. Now just need the new shop finished so I can use it, been a few months since I picked up a...

I need to replace the tires on the dump trailer, was going to convert to 8lug hubs with 16in wheels etc. but after doing some measuring and figuring decided to stay with 8-14.5 tires, found a good deal on some new Kenda Load Stars. I've used their more standard trailer tires in the past and...

I'm possibly going to look at an older 10ton deckover tag trailer. Mid 80's, dually tandem 10k axles, 19+5 dovetail deck. I've looked them up and the new ones look pretty nice but not sure how the specs compare to the older one. I know it needs some new decking boards but is supposed to be in...

I'm hopefully going to be starting on a workshop once the weather breaks in the spring, until then I'm working out details like electrical, I'm friends with electricians but one doesn't have a lot of experience in commercial applications and the others mother just passed so it's not a great time...

I built this vac 6years ago, the original build was documented on another site, it served well doing multiple yard cleanups over the years and received a few repairs and upgrades over time. The blower I used when I built it came from an old Ez-Vac I aquired, it worked well but was worn out...

Bought a Gannon FD100 off CL the other day, it's a stout piece, might be a bit much for my Kubota but we'll see how it does soon. I didn't feel like taking the BH off to test it yet, I'm not going to sell my standard box blade just yet in case it too much for my equipment.

Looking for info on their kits, pricing seems decent, but haven't been able to find much in the way of reviews good or bad. Anyone have any firsthand experience with them? I've been wanting to add a shop at the house for a while and have been gathering info and trying to price out differnt...

Looking at a L4740hst ROPS, it was a rental where BIL works, 932hrs, Loader, quick attach with a heavy duty long bottom skid steer bucket, R4 tires in good condition and a 6ft Land Pride rotary cutter in good condition. Tractor looks like it's in good condition other then the paint looking a...

Hello everyone, looking for some input on replacment tines for a tiller, I've done some research on it and still haven't made up my mind so figured I would get experienced advise. I bought a used JD 660 (built by Howard) a couple months ago and it could use some new tines, the PO replaced a...