Search results

Attached below is the BH92 install instructions broken up into 4 parts. It has subframe install instructions in it too:

Dave, attached below is a pages from a Kubota M series whole goods from 2018 to give you an idea of cost, but check with dealers sales dept. for current prices. It shows 2018 prices for the LA1154 and what all you need for it. If you want to order it from your Kubota dealer you order wholegoods...

See below image. Follow the speed change rod #11 from pedals to #2 trunnion arm. On most BX's where rod attaches to arm is a ball and socket. Some wear and rod falls off trunnion or ball breaks off and rod falls off. Some are nut and bolt and nut and rod falls off. Hopefully that is what...

According to the Workshop manual (WSM) available at this link: HERE. The following pdf from the WSM for tires shows you have the correct sizes (yellow highlight): EDIT: The 2150 HST 4WD tire size on pdf page 9 is missing the front and rear label but is the same size as the attached pdf.

Hope the two below attachments from service manual help you with you are asking:

Interesting reading from PM website: Craftsman Is Back The most interesting part to me anyway is "Craftsman also announced that many of its tools will be made in the USA- some with global materials." Yeah I know global materials likely means China., but who knows?

Download the work shop manual for your tractor here . Attached is an extract from that manual for that error code.

If you don't already have the Work Shop Manual for it download it for free HERE . If you don't have the owners manual with bleeding procedure, attached is the bleeding procedure from the WSM:

Or a skeleton bucket link here: SKELETON BUCKET

Kinda, see paragraph 2 in my previous attachment and this attachment. PS, you wouldn't happen to know a father and son that went from northern SC to NC about 20 or more years ago to buy a AC D12 to restore would you? I sold my D12 to a father and son from SC that drove up with a trailer to look...

Attached picture is text from the service manual from the B-C section about an oil line out of oil pump, this may be it but there is no picture in manual to go with it.

From the G, B&C and CA service manual I have in the B-C section it says 20 ft. lbs. See attached pics of extract from manual:

2015 L4701 HST, R4's, measured 74" from dirt floor of my barn.

vineman13, The following pictures (your original on top in pic 1) may help clarify. The bottom of pic 1 shows what the non FEL cap (plate) will look like. Pic 2 shows what the non FEL cap does, it routes the pressure from the hydraulic pump (P) from (A) (which used to go to your FEL control...

Before cutting wires I would first try the instructions I added below to your first pic, tab to push pointed at by red arrow on left socket then separation instructions on right socket. Looking at your picture it should work but have no idea if it will expose terminals that are swappable.

I bought a 1/4 " Kobalt In-line Moisture Filter at Lowe's cheap and put it at the end of the hose (the size hose I have on both my compressors). I put a male air coupling on input side and female air coupling to 1/4" male thread on output side. It is moveable between compressors. Have not used...

I know there are a couple or more former Marines and Sailors on this site and wanted to pass along another site I was invited to join by a former "Troop" of mine, who is now a Captain of Marines, which is "marines.togetherweserved.com" . Since I joined, I have corresponded with a couple of...

Saw this attachment in the Agri Supply catalog, thought someone might be interested in it for yard prep for seed. Ain't seen it on here yet. Looks kinda like a box blade with kinda scarifier teeth and a spiked wheel (pulviriser (sp?)) behind it. Don't know anything about it, but thought I'd...

She ain't much to look at, not shiny and new. But you should see the things we can do. She doesn't have the gimmicks and gadgets, you see. She's not 4 wheel drive and not HST. She's not washed and waxed after every use. And shows some signs of her neglect and abuse. With scratches and dents...

Muhammad, Would it be possible to do here in TBN the way it works at CBN? If you select view recent messages (amount of time) then click on an individual post, it brings you to that post in the thread, but shows all in full above and below it on that thread, even if you are not logged in.

From my local paper. Deere and Company will lay off about 300 employees, close the Williamsburg Va. and Jeffersonville Ind. facilities, and reduce operations at the Horicon Wis. facility. This is an effort to lower costs in Deere's Commercial and Consumer Equipment Division. Employment at the...

Was out clearing some land today with landscape rake and backed over a large root I had dug up.TPH then quit working and for some reason I looked under my tractor and saw a big shiny puddle. Thought I musta punched a hole in the tranny pan but found the root had knocked off the "s" shaped rubber...

Picked up a Frontier LS1072 (6ft.) landscape rake today. Its built like a tank, has a kickstand, 36 double bolted tines, 3 forward angles and 2 rearward angles and weighs 270 lbs. Like JMIII has pointed out, its built by Woods for John Deere. Would highly recommend Frontier for anyone looking...

I'd like to introduce you all to my first Grandbaby: Kaitlyn Emily born today (4/5/02) at 1042 AM EST. Mother (my Daughter) and Grandaughter doing fine. . I finally have a reason for my gray beard, I'm a Grandpa!

If you think you have parking problems in your town, check out the attachment. Operation Enduring Freedom, never forget why their there, and support our Troops!

Info for others like myself that dont have the three point hitch lingo matched up to parts yet. Hope this helps.

Read lots of posts of people using Amsoil synthetic, just wonderin if anyone has used the Rotella T synthetic.Saw it at Walmart for 20 bucks a gallon.I use Rotella T and am wonderin if the synthetic is worth the cost.Comments appreciated.Read about it at <A target="_blank"...

Amazing what you can find on the Web.Mark, found a web page about you and your cup <A target="_blank" HREF=http://www.fieldlines.com/other/chalkley.html> here</A> .Neat. P.S.Read the bottom paragraph on that page.

I did a Google search of TBN, came up with a lot of other web sites saying this is the best tractor site on the net, course we all know that. Also came up with this <A target="_blank" HREF=http://www.imcuniverse.com/team.htm> interesting link</A> about the background of TBN.Thought everyone...

Attached is a pic of the signs that greet you at the U.S. Marine camp in Afghanistan. God bless our Troops, the most unselfish (and funniest) Americans there are! Wally <font color=green>JD 750 "GATOR"</font color=green>

Found this on a web site: A big city lawyer went duck hunting in rural Arizona. He shot and dropped a bird, but it fell into a farmer's field on the other side of a fence. As the lawyer climbed over the fence, an elderly farmer drove up on his tractor and asked him what he was doing. The...

Did a search on all forums and found no specific results to my question. I am getting a welder to do repairs (cracks) on my tractor FEL and backhoe (looks like 3/16" steel), and also want to build some 3pt attachments I have seen other TBN users build. What I would like to know based on...

Great Christmas Gifts I\'d like to get! Dear Santa, Just thinkin about what I'd like for Christmas while I was fuelin, greasin and topping off the tractor today: "Diesel and grease" aftershave (my favorite two smells in the world, would have the smell without the mess.) "Diesel and grease...

This is off topic but not for fun. This brought tears to my eyes as I watched it. You will need macromedia flash plugin for you browser to view it. It will take a while to down load with dial up but it is well worth it! Make sure your sound is on as it has a beautiful song playing. This is...