Search results

While running the flail mower the other night I broke the pin on which the lower arms of the 3pt pivot. I think I cornered too tight with the flail on the ground. Couldn't get a replacement from TYM for a couple weeks. I heard that TYM makes some Mahindra models and found a pin from a Mahindra...

I have a T254 about 11 years old, 516 hours. I have this intermittent no start problem in cold temperatures below 10°F. Turn the key to preheat and the relay will click, light on the dash comes on, 10 seconds later you can hear the relay click again, light goes off. Turn the key to start and...

Picked up a used FL-165 flail mower at an auction (no brand identification on it). Got it home to find out I have a bent rotor. It looks like it could be an Ironcraft (same look and color) but there is only the serial number sticker on the machine. The Ironcraft have 24 weldments on the rotor...

I have a Besko 2-spool loader valve on my 2014 vintage T254. It is real loose again and the lift/curl positions are more oblique than straight (just up/down side to side) It has been that way since the day I bought it used. I have taken the cover off and tightened the bolts which help with the...

I purchased a Woodland Mills WG24 stump grinder to take care of stumps on the property. Put it on the back of my TYM T254 sub compact. (For those who noticed the ROPS down in the photo, it was put up before using the grinder. Just didn't bother stopping to put it up on the 20' trip from the...

Hi, Last year I purchased a used T254 with a loader and mower deck. The mower deck was a bit cockeyed from one side to the other. There were some bent parts that I replaced in hoping to fix this but ended up putting a spacer on the right lift pin and tightening the adjusting nut on that side...

Has anyone installed a rear remote on their T254. I've seen videos for the T25 and T264 but I don't think they apply to the T254, I may be wrong. I'm wanting to add a hydraulic top-link for when I start working on the church parking lot and a trail that I maintain nearby. The dealer says there...

Has anyone else had issues going from their vehicles with manual transmissions to HST. I have found time when I'm on the tractor and need to stop or hold the tractor on a slight slop my muscle memory wants to push down the forward pedal and not the brake (which is where the clutch is on the...

I'm so close to having this thing done. Anyway, I have the center console cover off to adjust the HST pedals when I noticed that even though I have the lever in the 2wd position the drive shaft for the front spins when I move it. I have checked the lever and it is turning the shaft going into...

Hi, former lurker now "proud" owner of a used T254 with loader and belly mower. Got it at an online auction . . . note to self, when spending that much money go and inspect anything you buy. Anyway, it looks like I will get to know this machine intimately, and I feel in the end I'll have a...

Looking for advice. I volunteer to mow the local cross country ski trails to prepare them for winter. Fairly rough terrain, a few stumps that should be ground, ruts etc. Most cutting is light grasses, ferns and goldenrod, some sections of heavier marsh like grass, some tag alder usually no wider...

I'm very much a newbie when it comes to tractors. I volunteer to help maintain a ski / bike / hike trail system near Calumet, Michigan. Our club just purchased a used John Deere 970 (4x4) with an 80 Loader. We have a flail mower and box scraper on the way that should be here next week. There...