Search results

Here are some tow behind poop pickers: Poop & Dung Collector | Paddock Cleaner - Tow and Collect - US https://www.amazon.com/Efficraft-Manure-Behind-Trailer-Sweeper/dp/B0DNS2NN3F?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=AC3DY48MBRCG6&gQT=1

One of the problems with Stellantis is direct-run numbers. Ram 1500 Factory Is Building Too Many Broken Trucks, Stellantis CEO Says

This one looked clean until this happened....wow.

You might have to have a tech hook up to it with the shop computer and check the codes and parameters. Keep us posted. (y)

Your not gonna have any power if the DPF is plugged like this. Does the exhaust sound and feel very muffled?

Being that it was running so bad before the rebuild, the DPF might be plugged. :unsure: Also, did you swap out the fuel for known good fuel. If not, you don't know if there is gasoline or even paint thinner in there.

Did you clean/replace/bypass the DPF?

Some, like craftman, call them a rotator ratchet.

Many things have changed over the years like technology and fuel/oil formulations. We now have common rail diesels and grandpa's fuel and ATF fluid doesn't exist anymore.

^^Same here...I haven't had to start the beast yet this winter. It looks like it may be the 2nd driest January in history for us. Not good.

My Bobcat uses preheated fuel to heat the filter housing so it has to get real cold to plug it up. Even engine heat will be helping heat the filter so the OP should be fine.

I have never had to use red bottle and I'm a bit north of you. He77, you'll be in the warm weather in a couple of days, don't sweat it.

Red bottle is NOT for preventative use: "Diesel 911 is a winter emergency use product. This Winter Rescue Formula reliquefies gelled fuel and de-ices frozen fuel-filters to restore the flow of diesel fuel to an engine. Diesel 911 does not prevent fuel gelling – use Diesel Fuel Supplement...

It seems you can carefully snake it up through the top without taking much apart.

The 2025 Caterpillar pickup:

One of my general purpose Bobcat buckets has the bolt-on grapple. It weighs a bit but the Toolcat can handle it. I can use it as a regular bucket or grab things with it. The solid edge prevents me from digging into the ground if I'm just moving piles of branches. I have moved LOTS of firewood...

I had a neighbor that owned a pearl white Lincoln pickup. They only made them a few years. Lincoln Mark LT - Wikipedia

Kubota pickup truck:

This would be nice though.

Like this:

I agree.

So many other makes also require a computer from the dealer to reprogram replacement parts or resetting display after simple scheduled maintenance. It seems Deere is the one being targeted though. :rolleyes:

It looks like the mounting lug on the end of the rod would prevent seal replacement without total disassembly. It looks like a snap ring is used instead a gland nut too. :unsure: Power Steering Cylinder Assembly - Weaver's Compact Tractor Parts New Holland #SBA344960206 KIT

If you can get a front 2" receiver there are many weight brackets that fit. https://heavyhitch.com/all-products/?tm=tt&ap=gads&aaid=adapb1XEOTtCD&gad_source=1&gclid=Cj0KCQiA-aK8BhCDARIsAL_-H9nQuPrs2TdzWiUchjTb3PcDjKQkNIZ_C8i5AMdzOvCX6A13tj7bbVYaAj0nEALw_wcB#weightsandweightbrackets

The 42lb Deere weights are quite common. John Deere Tractor Rear Weight BG20029 - The Home Depot

The shops I worked at had black pipe. The pipe works good for hanging all sorts of things off of it like extension cords and other stuff.

Yep, that is what I do. It removes nearly all the snow but leaves enough to cover the gravel.

How long has it been in 4x4? Follow the 4x4 lever and linkage where it goes in the cases and spray some penetrating lube there. Sometimes new tractors just need that first spray or they will rust there.

...or you could clamp the nut to the piece and weld it, then tap drill/tap through the nut. That way the nut helps guide the tap straight. :geek:

If the skids were mine, I would go right to a 1/2" bolt. Drill (tap drill), tap the skid, then use the bolt to hold the nut in place so you can weld it. The threads would then be through the weldment, and the nut.

When my MIL died my wife handled the estate during the covid crisis with no lawyer.

Try this: https://codes.findlaw.com/us/title-26-internal-revenue-code/26-usc-sect-4082/

Can dyed diesel fuel be used in vehicles registered for farming purposes (F-tags)? No. Since federal or state tax has not been paid on dyed diesel fuel, it cannot be used in vehicles that are designed for highway use and are required to be registered in Virginia. (Va. Code § 58.1-2265) See...

Do you have a way to block the air intake if it happens again? That would be a quicker way to shut it down than cutting the fuel.

In the parts list the guy had in his pdf file, the sliding gear was SBA322342090 and the counter shaft was SBA322571660. In my 4/2000 NH parts manual, the gear is SBA322341330 and the shaft is SBA322570701. When trying to find parts, you may want to ask why the PNs changed. Maybe you need to...

Does this look familiar? Viewing a thread - Dx33 pto not staying engaged Notice the parts list pdf file. Strange, the parts are identical to my NH TC33D parts book but some numbers have been changed.

Is your tractor a hydro or gear?

Please post a picture for us to admire! (y)

My bucket and grapple are up on a rack in the shed so they are easy to see. The 3pt attachments like the tiller and blower are under the rack and are on dollys.

This part too..... "Note the jumper circled in yellow. This jumper has a “high” and “low” setting. It is set to the “low” setting by the factory, and the “high” pin has been cut off. I found that the range was extended by soldering the “high” (cut off) pin to the center pin."

Interesting read: Adding range to a Dakota Alert WMT-3000 wireless driveway alarm | Jay's Technical Talk

I have had 3 Dakota Alerts motion detectors and a Guardline motion detector. When I buy another one, it will be a Guardline.

The V8s that were replaced by the 6 are now having head gasket problems.

My Toolcat did the same as we have only had enough snow to use a shovel.

Way back when, a friend sold me a Skiroule RTX 447 for $40 and it needed a recoil. Something like $15 bucks for a used recoil and I was up and running. It was one of my better trail machines.

I just have the neighbor reach over the fence with his Deere 450D to do my digging. (y)

Just saw on the news....The Cybertruck guy was inspired and worked up by a bunch of conspiracies like the drones and china balloons.

Yeah, they have lots of issues: https://www.autoevolution.com/news/brand-new-dodge-charger-daytonas-reportedly-arrive-dead-at-dealerships-or-die-within-miles-245205.html

Flag waving people do crimes all the time. :rolleyes:

It is nice having a gully on the property as it gives you somewhere to toss yard waste. Toss your rocks, branches, grass clippings, stumps, fence posts, etc for years and not fill it up.

The problem is not going away....it is growing.

If you just jet a puff of smoke on startup but seems to run fine otherwise, I would just use a fuel additive. If it is not running right, getting the injectors professionally cleaned may be needed.

If I was using a bucket for snow removal on gravel, I would buy those in an instant.(y)

I think it just depends on the quality of the road bed if moisture and thawing will affect it. My drive has a strong base that even a propane truck can drive on it when the frost is coming out of the ground. It never "goes to crap". Everyone has different conditions to deal with. (y)

Same here. Nearly the entire state is snow-less....strange. The little snow we did get I shoveled.

Well, yeah.....before the ground freezes, nothing really works good. That is when I just drive on the snow to pack it down. I really hate having to clean gravel out of my yard in the Spring. Grrr

I NEVER use the blade in the "forward" position on gravel. Pushing snow with the wrong side of the blade won't dig in, as you say. (y) I did make shoes for the blade which works too.

I would think that a person would be able to get parts from Omni too then. (y)

It would have to be substantial to do that.

Leaking injector?

Some snow pushers are made for hitting obstacles. Arctic Snow and Ice Products | Sectional Sno-Pusher™

Wow...Omnigear is their gearbox supplier.....interesting. RTD Series

I had to go out to the shed and look at my tiller, yep, I have the same painted over little tag. It is in a recessed area and seems to have the model/serial numbers.

Here is another community that moved because of the Kickapoo River flooding. Gays Mills, Wisconsin - Wikipedia

Maybe it is time for much more than just the church moving locations. Managed retreat involves the purposeful, coordinated movement of people and buildings away from risks. This may involve the movement of a person, infrastructure (e.g., building or road), or community. It can occur in response...

That is the tiller I have owned for many years. I took the skid shoes off as I didn't see a reason to have them. I fabbed up stands that bolt where the shoes bolted to so it sits nice in the shed.

At least get a hose to siphon a bit of fuel from the bottom of the tank to see whats down there. Then you would have a better understanding what you are dealing with.

All I have are the Snap-On metal rails with the clips (old school).

How much would an excise tax of 3 cents per kilowatt-hour amount to for a normal charging? Just wondering. :unsure: I also see that sales tax for the electricity will not be added now. Some say it basically is a wash. SALES TAX EXEMPTION Effective January 1, 2025, the sale of electricity...

Those plows are not floating plows and there are plenty of threads describing the differences. Sure, you can float the FEL but the geometry is wrong. For a long driveway, especially a gravel one, I would definitely be buying a floater or modifying a non-floater. Example of floating plow: SSQA...

But......what about Chrysler?

Forget the bolt-on PRO tooth bar as your bucket doesn't have the edge holes. The Piranha Pro Bolt On requires that your factory loader bucket have holes in the welded cutting edge. If a replaceable edge is currently installed you will need to remove it to allow installation.

Is your bucket pre-drilled with mounting holes? I'm sure the extra cost of the pro bar includes the extra price of matching the hole spacing of your bucket.

It was a rented F-150 Lightning

From what I can tell, the TC30 had two different designed valve covers and the change point is SN 30000. The early ones had the tall breather on the cover with a hose going down from it. I'm just going from the parts diagram on the Messicks site. Hopefully someone else can chime in with more...

Does this work? Notice....it is a PDF file. https://www.shopfloortalk.com/forums/attachment.php?attachmentid=68306&d=1290318862

PCV valve is normally up under the valve cover. It is used to separate oil from the crankcase vapors and to vent those vapors into the intake manifold. Caution must be used when filling the engine with oil. Too fast and you can fill a cylinder with oil and cause hydrolock. See service bulletin...

Insiders at Stellantis are laying blame for the death of the Hemi V-8 solely at former CEO Carlos Tavares's feet, per a report by CNBC. https://www.caranddriver.com/news/a63149586/stellantis-insiders-blame-death-of-hemi-on-former-ceo-carlos-tavares/

More than likely you have a bunch of water/debris blocking the passage between the tank and filter. Trace your way back to the tank to find the blockage.

How are the sale numbers of the Hornet? That is what is being built now. The Charger and Challenger were axed by the past CEO and he is now gone too.

All sales are way down....tanking. That is what this thread is about.

They are in panic mode so they have to quickly come out with a "six pack" option package for the car that people don't want. :rolleyes:

It sounds like you haven't solved the water control issue yet. Until you do, even packed, the gravel will wash out.

Bolts that go into a coolant cavity need sealer applied. Bolts can also "bottom out" on old sealer that is in the bottom of a blind hole. Those should carefully be cleaned out. What does the head/block mating surface look like? One other thread showed the surface that looked like a disk grinder...

The oil burning was not caused by dried out cylinders. The problem was too much oil being sprayed at the piston skirts from the AFM pressure relief valve. Too much oil then would overload the oil control rings and create problems with the PCV system. Both would lead to oil consumption. Those...

Here is a good post I found why you don't have to "crack the injector lines" on most newer diesels: Older diesel engines need bleeding as they don't pump enough fuel through the lines to purge out the air. As air is compressible, the bubble simply shrinks and expands, and subsequently fuel...

Many different race fuels including Turbo Blue: Race Fuels

Are you MIXING in the fuel treatment before is gets cold? Adding it after gelling temps is too late.

The battery from my truck must have had a dead cell (10.6v) too and charging it had the numbers all over the place. I had a spare red top optima that has been in the truck for a few years now while I wait to get a replacement. Unhook the battery and charge it to 12.8v + then let it sit for a...

You could just spin the filter off to have a look see. If the filter is the problem, just screw the old one back on until you do get a new one. If it is not the filter, at least having it off allows you to see behind there better.

We all know what acid does to our clothes too!

.....or turn fast....Weeeeeeeeeeeeeee!

Bleeding at the injectors would be the last step and only if needed. First bleed to the fuel shut-off, then work your way to the injection pump. Up to this point, you can use gravity, the lift pump (key on), or a manual lever pump to bleed. Then, with fuel bled to the injection pump, IF it...

No, you didn't spray weld. Basically, it is using a flame and powdered metal to bond a machinable layer to a part.

This is the big reason I bought my Toolcat. It's in between a tractor and skid steer but with suspension. Front lift arm that can use SS attachments and a 3ph in the rear to use my tractor attachments. There are limitations like loader lift height but it sure rides better than either tractor or...

A guy with a Deere made this electronic one: John Deere Compact Utility Tractors | Added an electronic inclinometer on my 3039r so I can tell the angle of my front implement | Facebook

Here is a digital inclinometer that has Bluetooth to smart phone. Amazon.com

Some plastics just can't handle the heat like other composites can. The black grill more than likely is that type.

Grifters promoting ponzi schemes......what could go wrong? :rolleyes:

^^^Agree.....something is a bit odd.

Like some others have said, the level indicator on my NH TC33D worked flawlessly and I used it often. I miss it and sure would like something for the Toolcat. I would like an electronic sender with a strong magnet to attach to the bucket, and a simple up/level/down LED indicator that I can mount...

Did you get some snow up there? We only got about 5" here.

Packer fans seem to like it. (y)

This is a good video of a LS owner that broke his left door and replaced it. He found that getting it from New Holland was cheaper and easier. He also talks about the procedure to replace it.

Well, that is not as bad as I was envisioning!

As is? Warranty? You better talk with the manufacturer first to see if they will still warranty that machine as new. Insurance has already wrote off a bunch of this tractor because of the damage and the dealer picked it up for a song. Now they are trying to sell it to you unrepaired, for the...

I have a Range disabler in my 2013 and it works fine. It will run the battery down if you don't drive much. You can get a extension wire for it that has an on/off switch. Most of my driving is local back roads so I shift into M5 which keeps it in v8 mode without using the Range.

If I were back in the shop and it was my unit and the bearings were fine, I would spray weld in a lathe to build up the surface.

Here is some history on the OP's rollers: Rebuild track idler HELP? (Kubota KX41-3v mini-excavator)

Replacing a rubber stem:

I'm thinking that the valve stem is a normal rubber stem like in a car tire? Did the ballast react with the rubber so the brass inner stem detach from the rubber when you turned the cap? If you don't have tubes in your tires, the dealer would easily be able to quickly replace the rubber stems...

^^Same here.

I taught myself to drive in the woods and I knew trees were unforgiving. On the road, those "trees" chase you.

I never like seeing a manufacturing company having troubles but I think Stellantis is waking up in panic mode.

This thing has been worked on recently and not by a decent mechanic either. The head and cylinder deck surface of the block looks like it was cleaned with a hand grinder course grit wheel. :eek:WTF! I have all sorts of precision quality gasket scrapers and razor blades to VERY carefully clean...

The latest news on saving Stellantis: https://finance.yahoo.com/news/stellantis-swiftly-reshapes-strategy-under-060219161.html

I'm retired and that snow looks wonderful. Nice clean crisp air with calm winds and sun. Perfect. I have snowshoes but we are not getting any snow here. It hasn't been good for a few years and it looks like another brown x-mas. Enjoy!

We are still in drought conditions so we better get some rain and a ton of snow before spring.

Cold water is better for the pores.

That is the way my 1991 Jeep Wrangler was. It was HORRIBLE on ice if you were not in 4x4 because the front tires started skidding way before the rears did. Thank goodness for anti locking brake systems now.

Right above the bumper is where all the snow and slush collects up in snow country. Anywhere else would have been a better location!

Years ago while working at a dealer, there were plenty of warranty claims of coolant leaks of covers using RTV by the manufactures. It just didn't work with coolant.

Here is some reading for you: Status of Everything Attachments

Here is a thread for you to read: Convert a gas Engine to a Diesel Engine?

I would never use silicone for coolant passages. A good thread sealer that does work for coolant and oil is permatex aviation sealer. It is thin, comes with a brush, is good to 400 deg, and is great on threads. It is a black sealer and may have been used on your engine. Back in the day, we would...

Agree but loctite 620 is more high temp.

Being that you are mostly raking debris and not just leaves or dirt, the Groundskeeper 2 rake is a handy tool. The neighbor had a big old tree cut down and the crew was using these rakes. The rakes do good getting twigs and chunks of bark out of the grass. After helping the crew do some...

That is a bit small for a 800 CCA battery. I have been using the Plus model which is 1.25 amp and has been flawless so far. Amazon.com

If you are getting bubbling in the radiator like that, you have a bad head gasket. Combustion chamber pressure is being forced into the coolant passages.

It looks like a group H8/L5/49 battery. Here is the battery the part number shows: https://parts.agcocorp.com/us/en/p/agco-fieldstart-battery/79037013 Like this one: H8/L5/49 - Car Batteries - The Home Depot and this Everstart from Walmart 900CCA: Robot or human?

You need to know what BCI group (design) your battery is so the shape will fit ok. Your old one is 800 CCA which is how much ummph it has.

When warm enough the snow is melting on the chute, I liberally spray the pivots with lube so the oil displaces moisture. It is not a sure fix, but it helps.

I see these are aluminum too...

So the stroke limiters are limiting how far the FEL can float down but not how far it can float up. And, being that the FEL goes down when the front wheels come off the ground, the limiters are limiting that action. Float up but not down. I can see where this is an improvement, but a floating...

Yeah, the geometry is all wrong when using a plow on a FEL when in float. When a plow is mounted on the front of a truck, the force of pushing goes straight back to the truck's frame because both are parallel to the ground. When using the plow on the tractor (float), the pressure from pushing...

I don't use much fuel normally so I need good fuel before we get the deep freeze. I don't want to wait for the local station to get the fuel I will need in January. I treat my fuel and I also have learned to keep 5 gal of #1 on hand to blend before winter. I run the tank low on fuel, dump the #1...

You can always test your fuel by putting a small sample in a plastic bottle and throw it in your freezer. My good winter fuel will stay clear while some fuel, even at big name stations, will be cloudy.

I also find that the older books are best at getting to the point.

It's too bad they had to over-engineer the thermostat and housing. I understand the need for sensors when the engine is high tech. It is the sign of the times. The long cyl head (I-6) (warpage) and questionable head gasket is something to watch down the road. Time will tell.

Here is a good video of the Hurricane engine overheating issue (thermostat). The video shows a Wagoneer in the shop and the mechanic's take on the engine design.

Diesel fuel gels when temperatures fall below 10 to 15 degrees Fahrenheit or -12 degrees Celcius. If engine complications occur at temperatures above 10 to 15 degrees Fahrenheit or -12 to -9 degrees Celcius, the issue is likely due to ice rather than gel. However, gelling can occur at...

Yep^^I have done that too. The radiator may "look" clean but if air can't freely flow through the entire surface, it's not exchanging heat like it should. You have to do the light test to be sure. (y)

It looks like he had the standard 27" tires so now he is slightly higher than the optional 29" tires. There had to be enough room for the wider 29x12.5-15 turf tires.

I have to wonder if the Belvidere IL plant will ever open again, as promised. Stellantis Defends Delayed Belvidere Plant Reopening Amid Lawmaker Pressure

You can't compare your '97 1/2 ton Chevy to a more modern 1/2 ton either. Back in '97, smaller wheels like 15" or 16" would fit. Now, you need at least a 17" wheel because the brakes are that much bigger. No comparison. I think you are facing a big choice, either up-size the truck or down-size...

Rumor I heard was the next 6.7 will have a different head that uses glow plugs instead of grid heater. It will still use hyd lifters and a var of the cp4 pump. No real change in power either.

With the 3 wires I'm thinking that it has a low beam and high beam. I'm wondering if they are switching the ground wire (brown) to turn it on and off. The green or white wire will be powered depending how much light you want. Powering both may draw too much amps. Any instructions with it?

When you go looking at vehicles, pay attention to how long it has sat on the lot. Depending how the dealer finances it's stock, they may be more willing to deal more on the vehicles that have sat there longer. Some of these dealers (some going out of business) have vehicles sitting for 250-350+...

In the US, it is a disaster. When sales are down 42%, way more than other makers, something has to be done. My cousin bought a Ram 3500 because the price was right (below cost), but that doesn't help the companies bottom line if that is how they sell vehicles. "In North America its revenues...

Stellantis' CEO resigns. https://www.cnbc.com/2024/12/01/stellantis-ceo-carlos-tavares-resigns.html

Stellantis' CEO resigns. https://www.cnbc.com/2024/12/01/stellantis-ceo-carlos-tavares-resigns.html

Rebuild kits for the V2403 engine show replaceable liners. Both holes through the casting would have to be tapped and plugged. The outside hole may have to be bigger to allow the tap to reach the inner hole. Use a high temp thread sealer.

Back in the day when sprayers were gas engine powered, they would have a mixing rod moved back and forth in the tank. Many chemicals we used on the farm needed constant mixing. It seems they only use a jet for agitation now? Jet Agitation Kit

The small shoes on my old Lorenz rear blower are not big enough to ride over a gravel surface. I always thought that I would check these guys out for bigger skids: Kubota | ARMORskids®

^^^Exactly how I look at it too. I just want to get to where I'm going.....safely....for everyone. Less drama is the best goal.

It would be more accurate if you can look at the other end (deep in the hole) as it would not be worn. They may have had a rectangle to keep the u-joints in phase. :unsure:

This guy makes them short and floating. You can also pin it if you need down pressure too. I like the design.

If I were building a crane that would go off-road, I would get the biggest casters I could and gusset the connection between the top rail and side legs more.

I never liked the roll around cranes like that for several reasons. They take up a bunch of room, are cumbersome to move around on rough ground, and need 2 people to use effectively. I used one in a machine shop for loading parts and angle plates onto small boring bars for machining. The...

Translated: I recommend gantry crane frame for hoist or DIY monorail for shed Hi, I've been thinking about equipping my shed with a gantry crane to use in case I need to move heavy weights or load bulky items onto the bed of a vehicle or into the bed of my trailer. Ideas? Useful height under...

The Ford Maverick is made in Mexico and the Hyundai Santa Cruz is made in Alabama. If a 25% tariff makes the Hyundai a better buy, it will help American assembly workers. But, where do the profits go? They might come back to the US with Ford but where with Hyundai? Which vehicle has more US...

Keep us updated on your experience with the truck/engine. (y)

I think tariffs will only add costs in the supply chain. If demand for your US made product goes up because of the tariffs, why would you not bump the price up? Has tariffs ever worked...

It looks like it has an electronic level gauge.

Yeah, it's almost cheating using a Toolcat, isn't it? I also clear out the neighbor's drive entrance just to get more time in it. Once it is warmed up, might as well keep plowing.

That looks too much like work as you are getting serious winter weather. Our small amount of snow melted the same day so no plowing here yet. Cold air from Canada will hit us the day after Thanksgiving.

I have 2 pans of water on the top and run tap water. I get the white crusty stuff but clean it out often.

Ah yes, I forgot about my homemade rake thing to separate the coals from the ashes....it sure helps starting the next fire. (y)

The only thing I heard about the hurricane engine was an issue with the thermostat and t-stat housing. It doesn't look like a plain ol t-stat either. A small part would break off and keep the t-stat from opening and cause overheating. I would assume that the issue has been addressed. :unsure:

I made different types and lengths of pokers and ash movers but mostly use just the one. I made a ash mover to scrape the ashes down the chute and use that quite a bit. Years back I bought a log grabber tool from Menards and I use that all the time moving logs where it is HOT. Most times I don't...

Only 3" of wet snow here followed by rain. It was lake effect coming back from Lake Mich that got us and it melted before nightfall. Our temps will finally fall after Thanksgiving so it looks like our Fall weather is ending. The Toolcat is all ready for whatever mother nature brings us. More the...

I wonder what they changed to solve that issue?

The link you had was 1 NPT while this is the 3/4 NPT https://www.etrailer.com/Vehicle-Heaters/Kats-Heaters/KH11409.html Way back in the 70's when I was working on medium duty trucks, I installed many different block heaters. Some were the freeze plug type and some were the tank type. Kat's was...

A block heater has the element right in the cooling passage in the block. The heat radiates out pretty good. A lower hose heater depends on "warm water rises" to get heat in the block. I don't think the block will be evenly heated. The tank type heater mounts outside the engine and pumps the...

Here is some reading: 2014 Toolcat 5600: G - Unhappy when Traction Control Enabled

It looks like you have a NH 3010S and from what I read, they had two different engines depending on serial number. They list a different block heater for each one too. https://www.mytractorforum.com/threads/1996-new-holland-3010.106245/?sortby=oldest

The neighbor would then have to prove his side. If he states he had been using it for 20 years, ask him how much money he has contributed towards the maintenance of the driveway. Do any of the neighbors pay for upkeep? Why should he get a free ride while other people pay for maintenance? Maybe...

The hand lever turns a small shift lever shaft that goes through the transmission case. It is common that the shift lever shaft going through the case has been rusting for some time limiting how far it moves. Then, being that the gears are not fully engaged, they want to pop out hence the need...

I have used this Hardman brand epoxy to repair boot toes before. This is the high peel strength, stays flexible type and it lasts a long time. One boot I have had a cut going through the top layer of leather. I got some of the epoxy down through the layers and worked into the leather a bit. It...

This dealer is giving the heads-up on getting your service work done and parts ordered NOW. The first of the year til 1/20/2025 the system will be down. Anyone else hear of this?

arly...it looks like much of the dead falls are ash? Is EAB just hitting you there? If the wood isn't too punky, that would feed a woodstove nicely.

Water in the gearbox is going to settle to the bottom, where a siphon hose will never reach. The water will be down inside the output shaft bearing and lower seal. The only sure way of getting most of the water out is to tip up the mower so everything will drain out. Or, pull the lower seal.

There are plenty of splitting videos...... https://www.youtube.com/results?search_query=b7100+split+case

I can either climb, toss a hook, or use a ladder. All worth the effort near a building or fence. I do quite good dropping trees 95% of the time but a tree jack would just add another tool in the shed.

I feel I would have more control of the direction by exerting 2 ton 6 ft from the cut. Like IndyIan, if I need to, I can put a rope 30 ft up and yank it where ever I want.

The one tool I wish I had was a tree pusher jack. I have a Hi-lift jack so all I would need would be the attachment to slide over the top of it. It would sure help with those smaller trees that you need to fell in a certain direction. Tree Pusher, Log Lifter And Stump Remover | FM3-LP | Forest...

There are threads about New Holland Boomer tractors breaking in half at that spot. Harsh loader use and 3pt backhoes were said to be blamed. Replacement casting were thought to be a bit thicker.

Yes, a quick hitch adds weight and moves the tiller further rearward. Me, I would use it with the 2" cut off. Most times, tractors with full size cat 1 3pt arms can use attachments without cutting the pto shaft. Most times the inner and outer tubes of the shaft are about the same length so if...

The neighbor that bought a new small tractor and 5 foot tiller had me measure and cut the pto shaft. It is easy for an ex machinist to figure out. He then bought a quick hitch that would have negated the need to cut the shaft in the first place.

Was the seal on the oil jug intact? There have been reports of people returning oil for a refund, but it was old oil.

^^agree...If it is cold enough for the tractor to moan and groan when it finally starts, it is too cold for me also.

I have always looked at the CT as just a silly fad.

The design of the diesel engine is compression ignition. The fuel ignites from heat produced from compressing the air to high pressure. The cold combustion chamber may not allow the fuel/air to get hot enough to combust. A cold engine will benefit this process if the combustion chamber is heated...

Having the lights on the rops facing forwards will also light the operator station up. Personally, I would not want lights in my face blinding me if I turn to the side or rearward. Even having a bright light that shines in the corner of your eye can be a nuisance. I would lean toward mounting...

Is the tractor positive ground and are all the components wired correctly?

If they were overlapping them to fit a small battery....it could be. :unsure:

Be careful using heat lamps as there have been many a barns burned down using them.

I only have a couple SK tools that I picked up years ago.