Rosher18's latest activity
-
RTake the thermostat to Napa, they can probably match it up with another by size that is rated for lower temps, or just replace it with a...
-
RLast week, my cousin called me about his JD mower having a loose right rear wheel. I went over and looked at it, and it looked like the...
-
RRosher18 replied to the thread Added warning flashers to the Z930M (pic heavy).I love a good lighted switch almost as much as I like a well-lit piece of equipment when it's potentially in harm's way.
-
RRosher18 reacted to nikdfish's post in the thread Added warning flashers to the Z930M (pic heavy) with
Good Post.
I've recently started doing more "road adjacent" mowing lately with the Z930M & figured increasing the mower visibility might be a good... -
RI had the same thing happen to me with an aluminum gooseneck horse trailer. The bad tire was on the rear axle, so I couldn't see it. I...
-
RI started this thread, because I did not really notice... I just happened to need to use the restroom. When I came out, I noticed the...
-
RThen I borrowed the quick hitch from my SCUT. I have a new one sitting at the dealer, but they were closed when I drove by this morning...
-
RRosher18 reacted to rScotty's post in the thread Kubota M59 — What Is This Lever Called? with Good Post.
that short lever is your AUTO THROTTLE ADVANCE (ATA) When you push the AUTO THROTTLE ADVANCE lever forward to the On position it should...
-
RRosher18 reacted to masseyrider's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Years ago I was doing some tractor work for a local nursey. I was supposed to go and rototill a field for planting. I hitched up and...
-
RRosher18 reacted to RjCorazza's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
I use semi disposable gloves, in the 8-9 mil thickness range. I usually give the grease gun a quick wipe down after I'm done.
-
RRosher18 reacted to WinterDeere's post in the thread Yet another trailer decking question... with Good Post.
Yeah, I've always heard locust is good, too. My window sills were made of white oak, installed between 1734 and 1775. Most are still...
-
RRosher18 reacted to WinterDeere's post in the thread Yet another trailer decking question... with Good Post.
Okay, just ordered white oak to be sawn. Total cost is $450 for white oak in 6/4, versus $325 for red oak, so no real comparison when...
-
RRosher18 reacted to John0829's post in the thread Yet another trailer decking question... with Good Post.
Local sawmill, rough sawn oak, treat with diesel and used motor oil it will probably out last the trailer.
-
RRosher18 reacted to Too many Kubotas's post in the thread Utility Trailer for Subcompact Tractor with Good Post.
I vote for tandem axle with brakes, 16-18', useful for lots of things. Not that tandem axles changes anything when it comes to getting...
-
RRosher18 reacted to oldnslo's post in the thread Utility Trailer for Subcompact Tractor with Good Post.
Like Torvy I have 14’ 5,000 lb axle with brakes since 99% of my use is hauling 1,000 lbs or less. Benefit of single axle is turning...