Recent content by oneparsec

Okay, good idea. thank you

I looked under the tractor. Linkage attached. Should i unhook the linkage and try turning the shift manually. With tractor off of course.

No, lever moved but no engagement

Thank you for the suggestions. I'll check them out.

Hello everyone: have 40hp Mahindra and the 4wd won't engage when moving lever to 4wd. Any suggestions a to where to start looking. Thanks

I have a set of 29 x 12.5 x 16 rear tires, what would be the proper size for the front tires. They will go on a M/F 1010 4x4 tractor. I hear there is a tire size calculation, but cannot find any. HELP!!!!

I'm going to look at a Belarus 420 AN tractor next week. Any pros or con's to the model. I understand it has an air cooled engine. Any particulars on the Belarus, other thanit's Russian made? HELP!

What are the pros and cons of air cooled diesel engine?

Has anyone converted and and added a dump body to a garden tractor? I've got an old Roper tractor thats been sitting in the back woods for a few years, (needs to be repowered). My wife has a hard time pushing the wheel barrow after cleaning out the stalls in our barn, and I thought if I could...

I have a M/F 1010 with a factory 1014 loader and wanted to increase the ability of the loader to lift a little more than the factory 500 lbs to around 8-900 lbs Would putting a larger pump increase lift?

My little m/f 1010 has become a project of sorts. Now I am thinking of adding a hydraulic remote to the tractor as well as filtering capabilities, which it has neither. Has anyone had expierience doing either of these and a good source for parts? Once my loader cylinders are rebuilt, I am...

Thanks to all for pointing me in the right direction on my leaking cylinders. But now I can't seem to find anyone in my area, Fredericksburg, Va. that can rebuild them. Any suggestions as to a good/reasonable company or if not too complicated, where I can get directions to rebuild them and parts...

Help! I have a MF 1010 with a FEL and the bucket always wants to drop/dump, even with the engine rpm's at 2,000. Any suggestions or advise? I would certainly appreciate it. Thank you, Jeff :(

I have a little mdl 1010 that came with a loader. My problem is that the bucket wants to keep dropping/dumping, even with the engine at 2000 rpms. I don't see any adjustment I can make and can only guess the cylinder(s) are leaking internally. Has anyone seen this condition? Unfortunatly, the...