number two's latest activity
-
Nnumber two reacted to saxtonhill's post in the thread Kubota L4600 Battery Replacement with
Good Post.
I have a L4600DT from 2013. I just went out to check the battery and it's 13.5V and 100% charged.i guess it should be dead by now but it... -
NThat's why you only read 30-40psi. The P port is the pressure Input to the valve. Teeing on that port will only have "Return" pressure...
-
Nnumber two reacted to Lineman North Florida's post in the thread Pictures from a skid steer mowing contractor with Good Post.
Those teeth look just like the ones that are on my drum mulchers, quadco's or quad cutters I believe are what they are called, so far...
-
NYou can pretty much picture the arrogant know it alls who decided totally sealed gas cans were the answer to cram down everyone's...
-
Nnumber two reacted to deserteagle71's post in the thread Making gas cans great again with Good Post.
There are very good fuel cans out there - but they are expensive. Because of the remote areas of the country I travel I always carry at...
-
NMaybe the nanny states will build little mini video cameras onto the gas cans to see if you spill any fuel. Then then they can send you...
-
NI find this as a sad commentary on today's world. Before the EPA edicts I don't recall any major discussions about gas cans. Some may...
-
NThe problem I had with the vents is the cap lanyard breaks. I went with drilled holes and rubber stoppers. Most of the time I fill...
-
NThat’s a pretty good deal, MM. Are they selling a yellow diesel version? Or just red? I drilled these into my current, nanny state 5...
-
NDoubt that. There'll be engineering costs to design a vent system that they already had decades ago, setup costs to design and fabricate...
-
Nnumber two reacted to Shawn T. W.'s post in the thread How do you clean your greasy loader pivots? with Good Post.
While my little tractor is no garage queen, and I'm not home a lot, so I rarely get a chance to "clean", just use! A few weeks ago … I...
-
Nnumber two reacted to RjCorazza's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Doesn't have to be big... My Kubota ZD mowers have 21 grease points each. The electric grease gun with LockNLube tip really helps. On...
-
Nnumber two reacted to 3930dave's post in the thread Your last generator Maintenance Run with Good Post.
Things can (and often do) change, w. Time. Cost pressures, and other factors, can mean the brands I trusted in the Past, should be...
-
NI wish most of it would just go away! ;) In 2021 I blew the engine in my 1989 F150, I finally found a RAM 1500, it was quite a culture...
-
Nnumber two reacted to Rustyiron's post in the thread Pictures from a skid steer mowing contractor with Good Post.
Ah, my disc mulcher takes 42 of these! 😐 and had to buy 100 pc to get that price! Rocks are definitely heavy on my mind and tend to...