number two's latest activity
-
Nnumber two reacted to Lineman North Florida's post in the thread Pictures from a skid steer mowing contractor with
Good Post.
When I work in some areas West of me they have flint rock but probably nothing like what you have to deal with, now cinder blocks seem... -
Nnumber two reacted to Rustyiron's post in the thread Pictures from a skid steer mowing contractor with Good Post.
Charlie your lack of rocks has me extremely jealous! Constantly worrying about destroying equipment, blades and $25ea cutters kinda...
-
Nnumber two reacted to Lineman North Florida's post in the thread Pictures from a skid steer mowing contractor with Good Post.
Back to finish up removing some more trees for one of my customers, these were large enough that I used the mulching head, once I...
-
NFaux News. Not diesel fuel. It’s way down and the whole country still runs on #2. I’m paying $2.99. It was $3.50-$4.50 2022-2024. So...
-
NNow you’re pushing it…..
-
NI bought ez-pour nozzles for all my cans. They had all the different threaded adapters to fit my old cans. They were a bit pricey, but...
-
NAlmost makes me hope that they will get rid of DEF next!!!!
-
NSaw this, great news. Reducing gas can flow to a pathetic dribble helped nobody. So wait. They are only directing the manufacturers...
-
NThank you for your attention to this matter! https://www.epa.gov/newsreleases/make-gas-cans-great-again-improving-flow
-
NThe rear tires are new ... I gave up haying after loosing money the first three years that I owned the place ... When I bought it I...
-
Nnumber two reacted to HamishMacCheap's post in the thread 24mmX27mm Combination Wrench with Good Post.
I recently ordered a 24mmX27mm open end combination wench for use on the 3-point nuts. It is a perfect size for my LX2610SU since it...
-
Nnumber two reacted to Mtsoxfan's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Because I grew up to be frugal, resourceful etc., I have been dealing with 40+ year old lever grease gun. After reading the start of...
-
Nnumber two reacted to Sawyer Rob's post in the thread Frozen Throughout bearing on Kubota L2250DT with Good Post.
I'm betting it's NOT the bearing, but the clutch plate rusted to the flywheel. That's why they give you a little piece of wood to...
-
NIf your mower was setup to run on the 1000 rpm input, it will not get to the proper rpm on the 540 RPM PTO. On your tractor when you...
-
Nnumber two reacted to Lastkidpicked's post in the thread Pictures from an athletic field contractor with Good Post.
This is what I like about these threads. Watching @Complete Turf Care have no big ego to get in the way and be generous to acknowledge...