Recent content by m5guy

I run a jinma 8" with 32 pto HP . I run it at 1800rpm. Works great. It was cheap on eBay.

My post driver has an attachment to drive t posts. Runs off 1 remote and hooks on the 3 point. Mine is a kencove hd 8. Same as a shaver h 8. Works great.

That is a water tank, used on construction sites to hold water that needs to be filtered or they are used to hold liquid manure to be applied to farm fields etc

If you have the hoses in the wrong port, on my hd 8, it will not do anything.

I used the mount for a pickup and welded it to the skid steer plate. Used a chain for float. It does stick out kinda far. Heavy snow will push you to the side sometimes. That's when the blower comes in handy. Tire chains would help with that though.

Shear pin somewhere on the flywheel

More weight, more metal. Should show quality with weight

I run a bush hog 72" tiller with 32 PTO hp. I loaned it to a friend who only had 20 PTO hp. Runs it fine. You can't rototill fast anyway. If your tractor is a hydro you can go as slow as required.

Those are it, I believe the same as an aux jack for a BMW motorcycle. My 357 has a beacon light switch on the pillar. I have a pair of woopty lights I run plowing snow, and I made another pig tail for my sprayer pump so I don't have to run a cord through the window.

You will also want to consider the weight of the grapple. I have a long bottom rock bucket grapple and it is quite heavy, works good on the skid steer, but too heavy for the tractor loader.

I have the same chipper but mine is from jinma. Bought from a shop out of Tennessee. Haven't had any problems. Tighten every bolt when you get it. Mine was like $2300 delivered to a freight dock in town. I run mine on my 32 PTO hp tractor at about 1800rpm. It will chip a 8" pine tree. I mostly...

The big question is what are you using for, I mean are you a trades person that uses a meter everyday, or are you a hobby person using it a few times a year? As an electrician, I have a fluke with way more functions than the average person needs. But in my toolbox at home I have a simple bk...

I would change both filters. Mine has a napa1551 hydro filter. The larger filter is a Donaldson from the factory but I don't recall the number, I can look when I get home. I use a udt equivalent oil.

Same motor as a 743 bobcat , try that

Land plane does a good job. Rear blade has a steaper learning curve.