Recent content by gator

Attached below is the BH92 install instructions broken up into 4 parts. It has subframe install instructions in it too:

Dave, attached below is a pages from a Kubota M series whole goods from 2018 to give you an idea of cost, but check with dealers sales dept. for current prices. It shows 2018 prices for the LA1154 and what all you need for it. If you want to order it from your Kubota dealer you order wholegoods...

See below image. Follow the speed change rod #11 from pedals to #2 trunnion arm. On most BX's where rod attaches to arm is a ball and socket. Some wear and rod falls off trunnion or ball breaks off and rod falls off. Some are nut and bolt and nut and rod falls off. Hopefully that is what...

According to the Workshop manual (WSM) available at this link: HERE. The following pdf from the WSM for tires shows you have the correct sizes (yellow highlight): EDIT: The 2150 HST 4WD tire size on pdf page 9 is missing the front and rear label but is the same size as the attached pdf.

Hope the two below attachments from service manual help you with you are asking:

Interesting reading from PM website: Craftsman Is Back The most interesting part to me anyway is "Craftsman also announced that many of its tools will be made in the USA- some with global materials." Yeah I know global materials likely means China., but who knows?

Download the work shop manual for your tractor here . Attached is an extract from that manual for that error code.

If you don't already have the Work Shop Manual for it download it for free HERE . If you don't have the owners manual with bleeding procedure, attached is the bleeding procedure from the WSM:

Or a skeleton bucket link here: SKELETON BUCKET

Kinda, see paragraph 2 in my previous attachment and this attachment. PS, you wouldn't happen to know a father and son that went from northern SC to NC about 20 or more years ago to buy a AC D12 to restore would you? I sold my D12 to a father and son from SC that drove up with a trailer to look...

Attached picture is text from the service manual from the B-C section about an oil line out of oil pump, this may be it but there is no picture in manual to go with it.

From the G, B&C and CA service manual I have in the B-C section it says 20 ft. lbs. See attached pics of extract from manual:

2015 L4701 HST, R4's, measured 74" from dirt floor of my barn.

vineman13, The following pictures (your original on top in pic 1) may help clarify. The bottom of pic 1 shows what the non FEL cap (plate) will look like. Pic 2 shows what the non FEL cap does, it routes the pressure from the hydraulic pump (P) from (A) (which used to go to your FEL control...

Before cutting wires I would first try the instructions I added below to your first pic, tab to push pointed at by red arrow on left socket then separation instructions on right socket. Looking at your picture it should work but have no idea if it will expose terminals that are swappable.