AnotherBueller's latest activity
-
AI do remember every store that sold appliances demonstrating microwaves with bacon... I never had so much bacon in my life! We had milk...
-
AAnotherBueller reacted to ArlyA's post in the thread trail clearing technique and tools with
Good Post.
We run echo and stihl power heads and on them, run heads that hold 155 strings. These are that machines you can switch out the tool... -
AAnotherBueller reacted to 404nouser's post in the thread Outside storage for attatchments: How to keep the weeds down? with Good Post.
Talk to your local rock quarry, sand quarry, or concrete company and see if you can get some old worn out conveyor belt. 24-36 inch wide...
-
AAnotherBueller reacted to redmt's post in the thread Kubota V1702 engine - Is 200-250 PSI too low compression to run? with Good Post.
Use more starting fluid. If it does fire it will disassemble itself. Does it have glow plugs? Starting fluid and working glow plugs will...
-
AAnotherBueller reacted to Fxfymn413's post in the thread Kubota V1702 engine - Is 200-250 PSI too low compression to run? with Good Post.
Oil based WD-40 will fire a diesel when sprayed into the intake without causing damage.
-
AAnotherBueller reacted to scootr's post in the thread I Went To Purchase A New Mini-Excavator And This Happened..... with Good Post.
I'm spoiling my tractor if I park it in the barn and hose it off twice a yr...waxing tractors is city dude stuff.
-
AAnotherBueller reacted to TORQUIN's post in the thread Kubota V1702 engine - Is 200-250 PSI too low compression to run? with Good Post.
The trick to that is to wait until the glow plugs cool off. For instance, if your ignition has a separate position, to the left, for...
-
AAnotherBueller reacted to Fields_mj's post in the thread NEW BUYER IN TENNESSEE AND NEED OPINIONS with Good Post.
I found this to be true for the 30-35hp machines also. I was originally looking in that size. On a whim, I looked into 40 hp machines...
-
AAnotherBueller replied to the thread Kubota V1702 engine - Is 200-250 PSI too low compression to run?.Problem is that IF your engine has a GLOW PLUG even gasoline WILL detonate well before TDC, leading to the same issues as using ether...
-
APretty sure he was referring to the beaver being allergic to lead... 😄
-
AAnotherBueller replied to the thread NEW BUYER IN TENNESSEE AND NEED OPINIONS.4wd helps a lot on steep down hill grades. Skidding down hill with the rears locked in 2wd and no attachment to drop is an eye opening...
-
AAnotherBueller reacted to 2manyrocks's post in the thread NEW BUYER IN TENNESSEE AND NEED OPINIONS with Good Post.
What I see in the first picture is a steep slope with either a creek or some kind of drainage ditch at the base of the slope. What kind...
-
ATake the thermostat to Napa, they can probably match it up with another by size that is rated for lower temps, or just replace it with a...
-
AAnotherBueller reacted to ptsg's post in the thread Looking for ideas on Hydro top link support with Good Post.
This was my solution. A link from an old chain and a hose clamp. The hook is the original top link holder. It's been holding perfectly...
-
AAnotherBueller reacted to Cycledude's post in the thread Looking for ideas on Hydro top link support with Good Post.
I have also been using a loop of cord to support the hydraulic top link when not using it. Seems to mostly work very well for me. Yes I...