Good morning!!!!

   / Good morning!!!! #212,891  
Feeling better just very tired

61 outside going into 70s before cold front comes thru low in 40s but a couple of nights in the 30s. Maybe 1/4 of rain we need way more very dry here

Prayers for all our Country
 
   / Good morning!!!! #212,892  
70F and overcast @ 10:45, temps dropping from here on out.

No rain yet but very breezy and a wind advisory has been issued. Gusts of up to 45 mph are predicted. Possibility of thunderstorms as well.

Not sure what The Woman has on Her agenda for the day as She just rolled out of the sack, but I'm thinking today might be a good day to make pumpkin puree/pie filling and get that put up in the freezer.

I wouldn't complain if She could be persuaded to make a pumpkin pie either ... ;)

Beyond that just see what other mischief I can find to get into.

Hope everyone is having a decent Sunday ... (y)
 
   / Good morning!!!! #212,893  
Good morning! Low was 33° -- close to our first frost, but no cookie......
At least the wind calmed down yesterday. Today should be very nice.

Buppies, take care of yourself too.... Holly needs you.... and precious too!
The Ram truck is a crew cab. I would have preferred the mega cab with a longer bed. The crew cab rear seating area is way too big.... I'm 6' and can stretch my legs out straight!

Kyle, I am surprised that your area is so dry. When we watch our weather forecast, it seems that there are always storms showing there. We have had some decent rains in Sept and early October, which is very odd for this area.

Scott, you need to get a second home where it's warmer all year round..... that way you can keep the pontoon boat in service all year long....

Drew, glad the procedure produced a positive result!
How much are you asking for your RV? You can pm me or send an email. Might be interested.Don't work too hard planting those mums. They are one of Dona's favorites. We planted 6 more good sized ones this year, 4 of which placed around the pond.

Ken, nice display up the driveway. By the way, the driveway looks great after all the clearing you did.

I was able to get a few more purlins installed on the building yesterday, basically done with those. Today I am hoping to get the fascia done on the eaves. With the fascia done, I can get the roof on.

With that in mind, I have been contemplating my next step.... do the siding first, thinking the siding will reinforce the support for the roof.....
but, if I do the roof first, then the framing/ purlins will be protected from the weather....
But, if the roof is on, and no siding, then it becomes a giant parachute or sail....
I can use some opinions on the options....

Time for me to get moving....
Everyone have a great day!
 
   / Good morning!!!! #212,894  
69°F and .95 inches rain

Prime rib came out great. But rain prevented any mowing.

Football this morning. Likely some mowing this afternoon depending on wx

Prayers for at
Be safe
Have a great tractor day
 
   / Good morning!!!! #212,895  
Everyone should own a Corvette at least one time.
Mine was a 68 vette. Wife loved it. Would take it when she went shopping. 327 4 speed. Color was Marina Blue.
I had a 1971 and a 1985. Jumped to the 2005 Chrysler Crossfire and am currently sports car deficit. Need to remedy that!
 
   / Good morning!!!! #212,896  
Mpham, a shiny corvette would be a great 70th birthday present. While I have ridden in many, I have never owned one myself. I would like a red wine colored one with chrome shiny rims. :)
My cousin and best friend both have red ones. 2024 and 2025. I'm hoping for the Roswell green. My 71 was orange though. Hmmm.
 
   / Good morning!!!! #212,898  
Today I’ve off to Asheville for a pickup,
That phrase has a different meaning to me, I almost bought a pickup once in Ashville, because it was thousands cheaper than in MD. But I bought something else instead, but almost went to asheville for a pickup......

all my vettes have been orange, 4WD with a FEL...... probably could have bought a vet for what I have in tractors, but tractors have done better for me.
 
   / Good morning!!!! #212,899  
good afternoon, windy with strong gusts 72 with rain in the FC this evening

While driving in forested area got hit with a fallen branch. Sounded laud and hit the windshield as well. Fortunately did not see any damage

Sanded some on the table with the Hitachi belt sander. Tracking was an issues and destroying belts. A new Makita one sounded good but decided to take another look at fixing it. Some gumming under the shoe plate and built up wood dust so got that cleaned off. Fixed the tracking issue but still destroys belts. Decided it had to be the worn SS shoe plate that was sharp at the edge from wear and found it amazingly enough to be available for 4 dollars and 6 dollars of shipping. Ordered that

Next dug out and cleaned up an old post vise to attach to the table. It weighed in at close to 100 pounds and unwieldy to handle but managed to move it down to the welding shop and test fit it to the table. I will have to make a steel plate for the post to stand on but except for that it should fit

IMG_4601.JPG
 

Tractor & Equipment Auctions

(APPROX. 25) 4' X 8' X 3/4" OSB SHEETS (A52706)
(APPROX. 25) 4' X...
2019 Dodge Journey Crossroad SUV (A53424)
2019 Dodge Journey...
HIGH END ELECTRIC GOLF CART (A55745)
HIGH END ELECTRIC...
Link-Belt 75X3 (A53317)
Link-Belt 75X3...
2012 Ram 1500 Crew Cab Pickup Truck (A53422)
2012 Ram 1500 Crew...
2017 Nissan Maxima Sedan (A50324)
2017 Nissan Maxima...
 
Top