The day didn't go so well

   / The day didn't go so well #12  
I use a magic marker to draw a line on all my various chainsaw bars 16" back from the tip for cutting rounds since it's my preferred cut length. It makes for a quick reference no matter what length bar I happen to be cutting with. Usually I'm pretty close anyway but sometimes my eye is off a bit so it's nice to have a reference handy.
Tried it, the mark erased quickly. I just drilled a 1/4" hole 16" from the tip. Works better for me
 
   / The day didn't go so well #13  
Well I've tried cooking hot dogs on my engine while driving, but thankfully I've never "grilled" a turkey.
 
   / The day didn't go so well #14  
Well I've tried cooking hot dogs on my engine while driving, but thankfully I've never "grilled" a turkey.
How did the hot dogs come out?
1746153062588.png


I have seen a bucket truck operator leave a can of Spagettios on his defroster while working
By lunchtime the steam rolled out when he opened the can. Of course they still were Spagettios.... 🤮
 
   / The day didn't go so well
  • Thread Starter
#15  
Well, on additional consideration, The turkey didn't have much of a day either/
turkey.jpg
 
   / The day didn't go so well #16  
That was artfully done!

If the feathers didn't wear from weather, you might be onto a new truck emblem!
EAkCqFxWsAAa_yz.jpg
 
   / The day didn't go so well #17  
   / The day didn't go so well #18  
During my Army days, used to warm up lunch on the engine of the jeep in the Kansas winters.
 

Tractor & Equipment Auctions

(3) VACUUM PUMP TANKS (A50854)
(3) VACUUM PUMP...
CUSTOM ALUMINUM 16FT CAR TRAILER (A51222)
CUSTOM ALUMINUM...
1994 Mack CH613 T/A Wet Kit Day Cab Truck Tractor (A49461)
1994 Mack CH613...
2014 MACK GU713 WATER TRUCK (A51243)
2014 MACK GU713...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A49461)
2019 Allmand...
DOOSAN G90 GENERATOR (A50854)
DOOSAN G90...
 
Top