ronjhall
Super Star Member
TXdon, I use a pad most of the time. So far I have OEM knees. Glad you can get down with help of pad.
Good morning!!!!
- Thread starter 300UGUY
- Start date
- Views: 19637863
wngsprd
Super Member
Hey Kilroy! Glad you made it another year! I can see you are gonna look at everything with that new FLIR.
Popgadget
Elite Member
Good Morning
39° and that’s within 5 of the forecast high. Grey, overcast and drizzling. Supposed to clear up later and be nice for the next week. I’m getting tired of the mud.
Not much accomplished yesterday. Went out to lunch at a recently reopened restaurant. It used to be a dive bar with a flop house upstairs. Not any more. The food was good, but pricey. It was their second day being open, and not crowded at all. They were surprised to learn that about one occupant a year died upstairs. I gave them a little more “history” of the place, which had been shut down for many years. Was with my wife and a friend that’s a drummer, we played in there for many years.
Other than that, not much until I went out to play last night.
Big change from Sunday’s bluegrass, this was Pink Floyd, Rolling Stones, etc.
Tonight will be different again.
Today is cutting sandblast rubber for the rock man, need to get some meds for Zoe, apparently she has Lyme disease. Discovered during routine bloodwork.
39° and that’s within 5 of the forecast high. Grey, overcast and drizzling. Supposed to clear up later and be nice for the next week. I’m getting tired of the mud.
Not much accomplished yesterday. Went out to lunch at a recently reopened restaurant. It used to be a dive bar with a flop house upstairs. Not any more. The food was good, but pricey. It was their second day being open, and not crowded at all. They were surprised to learn that about one occupant a year died upstairs. I gave them a little more “history” of the place, which had been shut down for many years. Was with my wife and a friend that’s a drummer, we played in there for many years.
Other than that, not much until I went out to play last night.
Big change from Sunday’s bluegrass, this was Pink Floyd, Rolling Stones, etc.
Tonight will be different again.
Today is cutting sandblast rubber for the rock man, need to get some meds for Zoe, apparently she has Lyme disease. Discovered during routine bloodwork.
buckeyefarmer
Epic Contributor
Pretty sure yesterday was GH day for me.
buckeyefarmer
Epic Contributor
Happy Birthday Kilroy. What type of FLIR?
buckeyefarmer
Epic Contributor
Hope Zoe gets well
two_bit_score
Super Star Member
- Joined
- Dec 22, 2008
- Messages
- 12,477
- Tractor
- John Deere 110 TLB, Diamond C 19LPX GN trailer
Happy Birthday! That attachment is pretty neat! Good pics!
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,562
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
Our Golden Sophie had Lymes disease ever year or so test said. It never affected her and Doc said she had built up antibodies so it really never slowed her down. She lived to be 13
two_bit_score
Super Star Member
- Joined
- Dec 22, 2008
- Messages
- 12,477
- Tractor
- John Deere 110 TLB, Diamond C 19LPX GN trailer
Sending good thoughts for Zoe. Hope everything turns out well since you caught it early.
sodamo
Super Star Member
- Joined
- May 20, 2004
- Messages
- 18,472
- Location
- Big Island, HI
- Tractor
- Bobcat CT4545 LS XR4140H (Mine) BX2380 (wife’s)
63°F and raining, .24 inches so far.
Apparently, Mule needs the neutral starter safety switch replaced. Started right up when bypsssed and battery jumped. On order.
Guys won H&F.
Had hoped to test run my LS with its newly cleaned fuel cap. Maybe just let it run in the tractorshed as I don’t mow in the rain. I did get cap completely apart and cleaned, however no idea if put back together properly. Seems the inner part has 2 springs and a valve. Not expecting that, all went flying when released, so only a guess how it fits together. No luck finding a diagram. Replacement on order.
Prayers for all
Be safe
Have a great day
Apparently, Mule needs the neutral starter safety switch replaced. Started right up when bypsssed and battery jumped. On order.
Guys won H&F.
Had hoped to test run my LS with its newly cleaned fuel cap. Maybe just let it run in the tractorshed as I don’t mow in the rain. I did get cap completely apart and cleaned, however no idea if put back together properly. Seems the inner part has 2 springs and a valve. Not expecting that, all went flying when released, so only a guess how it fits together. No luck finding a diagram. Replacement on order.
Prayers for all
Be safe
Have a great day
two_bit_score
Super Star Member
- Joined
- Dec 22, 2008
- Messages
- 12,477
- Tractor
- John Deere 110 TLB, Diamond C 19LPX GN trailer
If this is GH Day there won't be any shadows seen with the over cast conditions we have and expect to have all day.
Mid 60's and calm. Feels colder because of the humidity I guess. I plan to trim some hegdges later today and run a few errands, make some phone calls, cancel some outdated subscriptions I should have cancelled already.
Prayers for our Nation and anyone ailing!
Everyone have a great day, be safe, warm and well-fed!
Mid 60's and calm. Feels colder because of the humidity I guess. I plan to trim some hegdges later today and run a few errands, make some phone calls, cancel some outdated subscriptions I should have cancelled already.
Prayers for our Nation and anyone ailing!
Everyone have a great day, be safe, warm and well-fed!
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,665
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Good morning! Low of 34°, first time since Dec.1st that it didn't go below freezing! High today should be 46°. The forecast for rain is all over the place, from 40% to 90% chance..... one brief sprinkle so far.....
Rip, sorry to hear about the frustration with the milkhouse. DIY might be your best bet.....
Paul, hope Zoe gets better!
Wng, sorry to hear about the MIL and the wife's difficulties. Hoping for a successful outcome!
Kilroy, HAPPY BELATED BIRTHDAY ! Cool new toy!
Helo, glad to see you posting! That is one nice shop! I bet you are glad to see more progress!
Buppies, continued prayers for healing and upcoming procedures.
Drew, are you going to charge 'drive through' admission for everyone coming by to see Longwood Gardens II when all the blooms are popping? That's a lot of seed!
LFN, great news that the tractor is working as it should! Didn't sound too bad of an ordeal to get into the roof.
David, hope the gas cap is the fix! Looks like there is enough crud in there to block the vent for sure! Fingers crossed for an easy fix!
Admin stuff going on here today..... not fun. Actually put me in a very bad mood. I should not have to do this paperwork, but the buck stops here. Bureaucracy at it's finest.....
Decided for pizza for dinner... comfort food!
Everyone have a great day!
Rip, sorry to hear about the frustration with the milkhouse. DIY might be your best bet.....
Paul, hope Zoe gets better!
Wng, sorry to hear about the MIL and the wife's difficulties. Hoping for a successful outcome!
Kilroy, HAPPY BELATED BIRTHDAY ! Cool new toy!
Helo, glad to see you posting! That is one nice shop! I bet you are glad to see more progress!
Buppies, continued prayers for healing and upcoming procedures.
Drew, are you going to charge 'drive through' admission for everyone coming by to see Longwood Gardens II when all the blooms are popping? That's a lot of seed!
LFN, great news that the tractor is working as it should! Didn't sound too bad of an ordeal to get into the roof.
David, hope the gas cap is the fix! Looks like there is enough crud in there to block the vent for sure! Fingers crossed for an easy fix!
Admin stuff going on here today..... not fun. Actually put me in a very bad mood. I should not have to do this paperwork, but the buck stops here. Bureaucracy at it's finest.....
Decided for pizza for dinner... comfort food!
Everyone have a great day!
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,665
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Not sure who asked about kneeling on knee replacements.....
My doc said "no" , not a good idea. He described it as a risk to damage soft tissue against the metal. At least initially.
I am the exception because of the difficulties with healing, due to the CRPS. I can't begin to put any pressure on the knee without pain. If I am able to get down, there must be some form of support to get back up using the arms..... But, no kneeling, leg has to be out straight.
Too much trauma done to the knee with the initial injuries and then all the surgeries. It may not ever get any better.
My doc said "no" , not a good idea. He described it as a risk to damage soft tissue against the metal. At least initially.
I am the exception because of the difficulties with healing, due to the CRPS. I can't begin to put any pressure on the knee without pain. If I am able to get down, there must be some form of support to get back up using the arms..... But, no kneeling, leg has to be out straight.
Too much trauma done to the knee with the initial injuries and then all the surgeries. It may not ever get any better.
sodamo
Super Star Member
- Joined
- May 20, 2004
- Messages
- 18,472
- Location
- Big Island, HI
- Tractor
- Bobcat CT4545 LS XR4140H (Mine) BX2380 (wife’s)
Happy birthday, Kilroy. And many more.
KilroyJC
Elite Member
- Joined
- Mar 30, 2022
- Messages
- 2,928
- Location
- Appalachia
- Tractor
- 1962 Case 430, 1995 Craftsman Yard Tractor/mower, 1949 South Bend 9A Lathe, WoodMizer Lx55 sawmill, Kubota KX033-4 Mini-Excavator
Thank you!
KilroyJC
Elite Member
- Joined
- Mar 30, 2022
- Messages
- 2,928
- Location
- Appalachia
- Tractor
- 1962 Case 430, 1995 Craftsman Yard Tractor/mower, 1949 South Bend 9A Lathe, WoodMizer Lx55 sawmill, Kubota KX033-4 Mini-Excavator
Thank you!
KilroyJC
Elite Member
- Joined
- Mar 30, 2022
- Messages
- 2,928
- Location
- Appalachia
- Tractor
- 1962 Case 430, 1995 Craftsman Yard Tractor/mower, 1949 South Bend 9A Lathe, WoodMizer Lx55 sawmill, Kubota KX033-4 Mini-Excavator
Thank you!
KilroyJC
Elite Member
- Joined
- Mar 30, 2022
- Messages
- 2,928
- Location
- Appalachia
- Tractor
- 1962 Case 430, 1995 Craftsman Yard Tractor/mower, 1949 South Bend 9A Lathe, WoodMizer Lx55 sawmill, Kubota KX033-4 Mini-Excavator
Thank you!Good Morning Guys,
Deerfield Beach, 56 to start going to 75 !
Partly sunny today !
Happy Birthday Kilroy ! Have a Great Day !
Drew, are you talking about me or Scootr ?
I do see some large ships going by out on the horizon! I can try and load that AP, to see what is going by here ! But I do see the tankers or cargo ships every day !
Looks like we have some rain coming in on Sunday or Monday , so will try and get more beach time in before that happens !
Phil, curious on what mill you went to ! Central Massachusetts? In Vermont I go over to Adirondack Hard Woods in Lake George ! In Connecticut I go to a local mill in Woodbury, Ct !
Hope all have a blessed and safe day !