Snow痴 coming

[metalbender]

Back to my fel blower. Slow progress, getting older. Ssqa plate on the blower.

 

[Industrial Toys]

We had a session of ice pellets today during one of many rain showers in ten degree"C" temperatures today.

 

[leonz]

Back to my fel blower. Slow progress, getting older. Ssqa plate on the blower. View attachment 672442View attachment 672441

Do you have a hydraulic power pack for that snow blower?

 

[metalbender]

I built a rear pto chaincase with a double row #50 chain. The case is close to the pto so I can still utilize the three point for a back blade. I like the positive power transmission like the Erskine and Schulte blowers. Experimental of course, lots of sittn n thinkin. The rotation issues will be #60 chain with idlers in front of the ssqa plate. No mods to the blower so it can be returned to regular three point configuration.

 

[ruffdog]

I built a rear pto chaincase with a double row #50 chain. The case is close to the pto so I can still utilize the three point for a back blade. I like the positive power transmission like the Erskine and Schulte blowers. Experimental of course, lots of sittn n thinkin. The rotation issues will be #60 chain with idlers in front of the ssqa plate. No mods to the blower so it can be returned to regular three point configuration.

Mechanical driven from the rear? Will you chain the loader in position so you can't move it too much?

 

[metalbender]

Prob use slotted flat bar on the lift cylinders to limit travel.

 

[metalbender]

Snow is not here yet. A little progress.

 

[dragoneggs]

We had the first dusting of snow in the mountains last night. Night time temps have dropped a bunch the last couple of days.

 

[TractorTYMe]

Snow is not here yet. A little progress. View attachment 673101View attachment 673100

That looks like some premium fabrication man.

 

[metalbender]

Getting closer every day. Have about sixteen inches of lift without compromising the pto shaft. [ATTACH

 

[Hilbilly]

That's some awesome work!!!

Got any pics of the rear PTO chain drive?

Can't wait to see some video's of the thing in action.

 

[Thomas]

Old man winter stop by this morning to say hi here.

 

[Gordon Gould]

Old man winter stop by this morning to say hi here.

We got the same and it is still coming down. Are you ready ???

gg

 

[Thomas]

We got the same and it is still coming down. Are you ready ???

gg

Almost 100% ready Gordon just have to put rear chains on tractor dust off Fisher plow for pickup...hope this snow helps slow down the drought.

 

[Gordon Gould]

Almost 100% ready Gordon just have to put rear chains on tractor dust off Fisher plow for pickup...hope this snow helps slow down the drought.

According to my gauge we got 2" of rain before the snow started and an inch earlier in the week. Should help a lot. We've been babying the well for over a month. 4 neighbors have either drilled new wells or went deeper last month.

gg

 

[Slowpoke Slim]

Light dusting here too. Can't say I welcome the early snow, but at least it's precipitation. We've been extremely dry since spring.

 

[Oaktree]

According to my gauge we got 2" of rain before the snow started and an inch earlier in the week. Should help a lot. We've been babying the well for over a month. 4 neighbors have either drilled new wells or went deeper last month.

Same here, we've gotten 8+" of rain in the last couple weeks, very much appreciated after a really dry summer. Our well didn't go dry but it did get to within a couple inches of the pipe. It's recovered since then. No more flushing with river water! :thumbsup:

Got 3.5" of wet, heavy snow overnight, didn't do this lilac any favors...

 

[Thomas]

Same here, we've gotten 8+" of rain in the last couple weeks, very much appreciated after a really dry summer. Our well didn't go dry but it did get to within a couple inches of the pipe. It's recovered since then. No more flushing with river water! :thumbsup:

Got 3.5" of wet, heavy snow overnight, didn't do this lilac any favors...
View attachment 673424

Between chainsaw and pole cutter had serval trees needed to be clean up.
Going to have drill well check this week thinking were real close.

 

[metalbender]

The beginning of the chain case.

 

[Gordon Gould]

Great explanatory pictures. All the thought you must have put into this seems to be paying off big time. Very impressive.

gg