TX1500F hydraulics slowly lowering

[secondgearandstillgoing]

Hi just got my tx1500f all back together new wiring harness, now over night the hydraulic lift arms at the back drop over night i haven't noticed it while i was using it to tow a trailer collecting logs i hadn't taken much notice the last couple of days until i had just this minute gone to it and the tow hook is in the dirt and thought yes every morning i have lifted it to move the tractor
is this an easy fix or is it a total pull it apart job

 

[wheelbuilder]

It sounds like the seals on the 3 point piston need replacing.
MarcelPL had a thread and FXRS55 did too about replacing them.

 

[secondgearandstillgoing]

It sounds like the seals on the 3 point piston need replacing.
MarcelPL had a thread and FXRS55 did too about replacing them.

thanks wheelbuilder i'll try and get hold of the treads and have a read

 

[marcelPL]

Here is my topic where you will find some photo's and stuff:

https://www.tractorbynet.com/forums/iseki/406540-iseki-tx1500-name-lifting-arms.html

Here is Don's quest to re-build the tractor, lots of details there:

https://www.tractorbynet.com/forums/iseki/273164-bolens-g154-iseki-tx1300f.html

good luck,
M.

 

[secondgearandstillgoing]

Here is my topic where you will find some photo's and stuff:

https://www.tractorbynet.com/forums/iseki/406540-iseki-tx1500-name-lifting-arms.html

Here is Don's quest to re-build the tractor, lots of details there:

https://www.tractorbynet.com/forums/iseki/273164-bolens-g154-iseki-tx1300f.html

good luck,
M.

thanks marcelPL had a good read of your and don's rebuilds, just now looking for some o-rings for my TX, just managed to sort out the missing 3 point linkage had a job there trying to find the right length of lift arms