Help finding forum photos?

[jodebg]

Looking for the photos posted by a forum member of a piece of angle iron welded to the center
of a bucket with 5 verticle slots for securing a chain. Hoping someone knows how to access them. Thanks

 

[oosik]

This could be a tough nut to crack. Hopefully, somebody remembers this thread/post. Otherwise - you will have to think up an appropriate title and search via that title.

 

[Diggin It]

Check through this thread: https://www.tractorbynet.com/forums/customization/404148-bucket-hooks.html

 

[jodebg]

Thanks for the link. There are actually very nice, but not what I was looking to find. Nicely done!

 

[countrybumpkin]

Here a thread of some

https://www.tractorbynet.com/forums/customization/376751-chain-slots.html

 

[WranglerX]

Could this be it...

https://www.tractorbynet.com/forums...iy-bucket-hooks-features-tap.html#post5238135

Dale

 

[Reb954]

Like this one? It seems to only be the thumbnail picture, not sure where the full size one is.

 

[jodebg]

DL, Chim's photos may be the ones? It was very similar and had the same 5 slots, but I remember seeing the photos
on a thread before 10-2018? But the mounts were on a Kubota, that I do remember.

 

[murphy1244]

DL, Chim's photos may be the ones? It was very similar and had the same 5 slots, but I remember seeing the photos
on a thread before 10-2018? But the mounts were on a Kubota, that I do remember.

I am thinking that's Chim also

 

[Gordon Gould]

This picture of chim's could be it - I remember that thread

https://www.tractorbynet.com/forums/customization/404148-bucket-hooks-post5276836.html#post5276836

gg

 

[chim]

Here are a couple of the most recent ones. These are on the L4240 that Santa brought. The metal they're mounted on had sufficient thickness for me to tap to 1/2-13 instead of using nuts on the bottom side.

 

[Xfaxman]

Looking for the photos posted by a forum member of a piece of angle iron welded to the center
of a bucket with 5 verticle slots for securing a chain. Hoping someone knows how to access them. Thanks

This is a thread that I bookmarked: https://www.tractorbynet.com/forums/customization/310007-bucket-hooks-round-top-bar.html

And chim's picture:

 

[jodebg]

Thanks to all for helping. Looks like I found the photos aong with other good ideas as well.