Loader T234 loader slop

[Tiptoo]

If is like the t273 I owned and the frame is not broken it soon will be. I repaired my two times before I made sub frame for it.

Any pics of your sub frame?

 

[Tiptoo]

If is like the t273 I owned and the frame is not broken it soon will be. I repaired my two times before I made sub frame for it.

The only thing holding the 2 sides together on mine is 1 round hollow tube. The twist can happen at the quick connects/bucket or both loadermounts. Because I'm preventing it at the mounts with the washers...im hoping to prevent it from breaking.

 

[Bud Soda]

Post # 35 here. http://www.tractorbynet.com/forums/tym-owning-operating/299636-273-broken-frame.html Also you will have to replace the front drive shaft if it still has the old style.

 

[Tiptoo]

Post # 35 here. http://www.tractorbynet.com/forums/tym-owning-operating/299636-273-broken-frame.html Also you will have to replace the front drive shaft if it still has the old style.

Thank you very much!!!
My hood also pops up frequently.
Another sign of a twisting frame??

 

[Tiptoo]

Post # 35 here. http://www.tractorbynet.com/forums/tym-owning-operating/299636-273-broken-frame.html Also you will have to replace the front drive shaft if it still has the old style.

I already torqued all the frame/loader mount bolts to spec and had 1 loose. So I pulled it to make sure it wasn't a broken bolt. Then locktited it back in.

 

[Bud Soda]

The frame usually breaks where the bolts go through. Yes the hood pops open and also wires will rub the frame under the dash and cause a short. It will blow a inline fuse(40A) on the main wiring harness. If you can make a subframe or have someone do it it will solve the twisting problem.

 

[Tiptoo]

The frame usually breaks where the bolts go through. Yes the hood pops open and also wires will rub the frame under the dash and cause a short. It will blow a inline fuse(40A) on the main wiring harness. If you can make a subframe or have someone do it it will solve the twisting problem.

Been contemplating a factory backhoe. That sub frame would work, right?

 

[Bud Soda]

Been contemplating a factory backhoe. That sub frame would work, right?

It should. The factory should have tied the front to back axle like the bigger tractors. I didn't know they made a backhoe for the small tym's?

 

[Tiptoo]

It should. The factory should have tied the front to back axle like the bigger tractors. I didn't know they made a backhoe for the small tym's?

It's a by200. It includes a subframe. $7000

 

[Handloader109]

Guess having a belly mower and its subframe helps my cabelas clone. Hadn't thought about it, but it would keep things straighter