2005 Futon FT254

[mhendricks]

Can someone please guide me in the correct direction to find information on how to re roll pin the drive shafts in my tractor. The front wheels have quit pulling, but I have raised the front wheels and they are operating as they are supposed to. So it has to be the drive shafts. This tractor does not have the ball bearing set up as the most popular other Imported tractors do. I can't seem to find it any where and hopefully I am just over looking it.
Thanks in advance
Max

 

[Morgz]

Hi Max, I am have what sounds like the same issue with my Foton 404.
See a forum post here: http://www.tractorbynet.com/forums/parts-repairs/377233-foton-404-front-wheels-not.html?highlight=
I still have not found the solution. Have you had any luck diagnosing the issue?
Cheers
Dan

 

[777777]

Max, you could try calling Tommy @ Affordable Tractors in Texas and he may be able to provide some insight. He showas a being a Foton Dealer and is active on this site.
Or, send him a PM via the site messaging system

 

[Eric Song]

Hi Max, I am have what sounds like the same issue with my Foton 404.
See a forum post here: http://www.tractorbynet.com/forums/parts-repairs/377233-foton-404-front-wheels-not.html?highlight=
I still have not found the solution. Have you had any luck diagnosing the issue?
Cheers
Dan

Hi Dan
What is the problem with your tractor? I can not see your previous article.
If you do not mind,please send your problem to my email. Maybe I can give you a help.
Regards
Eric