LD1
Epic Contributor
With a little plumbing, and a $130 diverter valve, you already have the control wiring and buttons. Wouldnt be hard to switch to a diverted valve and use your joystick for feathering.
Question about Kubota Third Function Valve Operation
- Thread starter Fxfymn
- Start date
- Views: 35148
ovrszd
Epic Contributor
- Joined
- May 27, 2006
- Messages
- 33,727
- Location
- Missouri
- Tractor
- Kubota M9540, Ford 3910FWD, Ford 555A, JD2210
To the OP. Give this some time. You'll get used to it and be able to control the grip. At that time you'll appreciate the speed when needed.
I can softly grip if needed and most importantly can quickly release when needed.
As to the on/off switch. It's purpose is to turn off the function when not in use such as when using the bucket. This prevents accidental pressurizing the 3rd function system for no reason.
You have what I believe is the "Cadillac" of 3rd function systems. Allows all 3 functions to be used at once up to the tractor's full flow rate.
I can softly grip if needed and most importantly can quickly release when needed.
As to the on/off switch. It's purpose is to turn off the function when not in use such as when using the bucket. This prevents accidental pressurizing the 3rd function system for no reason.
You have what I believe is the "Cadillac" of 3rd function systems. Allows all 3 functions to be used at once up to the tractor's full flow rate.
devildog1
Veteran Member
This is the OEM 3rd function with lighted on and off button, as others have said give it time you will get better when you use it.
DevilDog
]
DevilDog
]
adventure bob
Platinum Member
2nd for the OEM Kubota thumb toggle. Once your used to it, it will be 2nd nature.
Luke'sScreenName
Elite Member
- Joined
- Mar 1, 2015
- Messages
- 3,710
- Location
- Lakes Region, NH
- Tractor
- Kubota MX4800 with BH-90X hoe; Hustler FastTrack 48; B3300SU (sold); 1969 Case 680B CK (sold)
Unless you farm children or light bulbs... Then go with the diverter! 
"Do you happen to have a picture of them?"
I'm not at home or I'd gladly post a picture of them, they are just JIC fittings with an orifice hole through them that goes inline with hoses to one side of the cylinders. The instructions suggest leaving them in place for a skid steer, or removing them for a tractor.
I'm not at home or I'd gladly post a picture of them, they are just JIC fittings with an orifice hole through them that goes inline with hoses to one side of the cylinders. The instructions suggest leaving them in place for a skid steer, or removing them for a tractor.
Luke'sScreenName
Elite Member
- Joined
- Mar 1, 2015
- Messages
- 3,710
- Location
- Lakes Region, NH
- Tractor
- Kubota MX4800 with BH-90X hoe; Hustler FastTrack 48; B3300SU (sold); 1969 Case 680B CK (sold)
My dealer must have taken them out prior to delivery. :confused3:. Just wanted to make sure I hadn't missed something. Thanks
oosik
Epic Contributor
FXfyn - don't give up on your current system so soon. You, like the remainder of us, will learn how to use the toggle and feather the grapple. I'm very capable of clamping down on delicate objects and not denting/crushing them. It just takes a little time & practice.
devildog1
Veteran Member
Unless you farm children or light bulbs... Then go with the diverter!
You didn't practice enough :confused2:
DevilDog
