Hiller stage 1

   / Hiller stage 1 #1  

Bansil

Gold Member
Joined
Mar 14, 2016
Messages
447
Location
State Of Franklin
Tractor
1967 Ford 5000 w/FEL(sold), 1950 Farmall Super A for the wife to drive around (needs fixed) 2024 Kubota B2601 FEL & BH
okay,just finished today's project minus paint and some bracing...if it works;)

working from home with no access to lathes and mills sucks, so using a grinder, hand drill and 15 year old Harbor frieght drill press...I pushed on :cool2:

Spent an hour making $2.00 pins :confused2:

20160425_154334_zps0onnayap.jpg


laid out

20160425_155536_zpszuhbqvbt.jpg


found some old rollcage tubing and used it for spacers
20160425_163405_zpsteejhn4v.jpg


had to make a couple plates to attach discs to tubing
20160426_105015_zpsjtlc405b.jpg


20160426_111203_zpshvmn8pjn.jpg


welded up disc holders

20160426_112945_zpsqj5fqtw5.jpg


mounted

20160426_121826_zpsdsx7mdu0.jpg


20160426_121832_zpsrahsbutt.jpg


I can swap sides and get them 6" from each other

well, going to grab lunch and see if they work
 
Last edited:
   / Hiller stage 1 #2  
Now add a set of spring plow points to the end of your square tubing, and it will loosen the soil your tractor compacts on the run down the potato row. Below is homemade rig. I use a 2" receiver hitch attachment, then built several things that go in the hitch, including the hiller, and the field fence 'un-roller' you see on the floor behind the hiller.

ry%3D400


ry%3D400


ry%3D400
 
   / Hiller stage 1
  • Thread Starter
#3  
it worked good

carried it down in bucket, and then assembled
20160426_144223_zpscmuhjb10.jpg

here it is on the ole girl
20160426_145730_zpsdj0idx3w.jpg


20160426_151054_zpszg0ovjwj.jpg


20160426_151227_zpsisdew0hu.jpg


of course papaw raised **** because I buried tators 6" or 8" deep instead of 4"....what ever...I am having fun and learning new stuff weekly


I told wifey, would of been easier if you just let me buy a Fire Truck :D:laughing::laughing:
 
Last edited:
   / Hiller stage 1
  • Thread Starter
#4  
TnAndy that is exactly what I am doing! just ran out of time :thumbsup: and I used one of my plow points for my row-er!!

Thank you for the picture!
 
   / Hiller stage 1 #5  
Great and creative thread. This is how you learn stuff in life.
 
   / Hiller stage 1 #6  
So you just ran the disks too deep then?

Looks like it works great!
 
   / Hiller stage 1
  • Thread Starter
#7  
So you just ran the disks too deep then?

Looks like it works great!

More like "not his way"

He is 90 years old, and they never used a tractor to do the garden (had a neighbor that would plow and disc it about 4" deep each year though) this is first year that he can't help in garden( i did have him help me/show me how to eye the potatoes though ;) )

he is dead set in his ways, our greatest generation is slowly dwindling away :(

So this is my mid life crisis, no 'Vette or Yacht; just an old blue tractor and reviving the old ways :D
 
   / Hiller stage 1 #8  
More like "not his way"

He is 90 years old, and they never used a tractor to do the garden (had a neighbor that would plow and disc it about 4" deep each year though) this is first year that he can't help in garden( i did have him help me/show me how to eye the potatoes though ;) )

he is dead set in his ways, our greatest generation is slowly dwindling away :(

So this is my mid life crisis, no 'Vette or Yacht; just an old blue tractor and reviving the old ways :D

Great looking hiller, looks like it will do the job for years to come. I like that blue Vette or Yacht or what ever it is.
My mom is 92, I know exactly what you mean. There is no changing them but I guess I would not want to. Cherish the time it will be over all to soon. Ed
 
   / Hiller stage 1 #9  
Ok school me please! :) I planted potatoes last year, first time. Did that by hand. (Not that much maybe 12 feet worth.) This year there's gonna be more! Not sure I'll have time to make the fancy tools you got there but I'll give it some thought.
But for my lesson: Regarding planting depth - when you say 4" deep do you mean below the ground level. (not below the top of the mound level) And is that 4 inches to the bottom of the trench you put the potatoes or is that 4inches to the top of the potato in the trench... And am I over thinking this... Lol. I had a decent crop last year but I think I could have done better.
Thanks!

E.
 
   / Hiller stage 1
  • Thread Starter
#10  
yeah over thinking kind of...the numbers where more rhetorical type of measuring

if you dig a row say 3" deep from ground level, we then spray for bugs, and drop our eyes about an inch tall

normally we would cover by hand pulling from top and bottom of row

this puts about 6" extra dirt on top of ground level so the tators are about 8 inches under ground and then it will settle to the magic number of 4" (it is really about 6" you just agree with seasoned farmers)

you want tators deep enough so they don't get sunburn if they break out early before hilling (hard green spots) when they start to grow

I would rather they be deeper, with the drainage ditches the disc make and let them grow up

it will take longer for them to show

a basic potato eye will grow about anywhere, they need drainage to keep water from sitting and rotting them

4", 8" and 12" doesn't really mater much

and 12' isn't much...you need more :thumbsup: ...we put an eye every 12" ;)

what kind of potato's do you do?
 
   / Hiller stage 1 #11  
Looks like you have been really busy lately, if you get a chance to update your bushhog thread that would be great. Your killing some of us with the suspense. :)
 
   / Hiller stage 1
  • Thread Starter
#12  
:D


Oops


:drink:
 
   / Hiller stage 1 #13  
I dont plant a lot of taters each year, but I have been planting taters for years. Dad always prepped the soil and then he would hook up my brother and I to one of those old big wheel push plows. We where the mules and he just delighted in saying Gee and Haw as we pulled the plow laying off rows. Dad would bury the tater sets as deep as he could. As the tater plants came up, we would take a tiler thru the middle of the rows to loosen up the soil and then hoe/hill it, covering up the tops. by the time the taters where in bloom we would have a ditch between the rows a foot high. Funny thing is, after all that work, we never grew a crop worth a hoot. We had taters, just not lots of them and mostly small in size.

Present day, I dont ever plow my ground. Its mostly fill dirt with lots of big boulders buried under neath. To plow would only bring those big boulders to the top. What I started doing several years ago, is till everything, then lay off shallow rows. I plant my taters almost on top of the ground and then use the hiller attachment on my troybilt tiller to cover the sets. One year, I didnt even lay off rows, just laid the taters on top of the tilled soil. Doing it like this, my taters are generally up in about 2 weeks. I then will run thru the middle of the rows again with the tiller and hilling attachment and cover the tops up. At this point I am done tilling and hoeing. I will go back and fill in the trenches between rows with a composted wood mulch. I like to fill the middles to the top of the hills with the mulch. This mulch provides weed supression as well as helps retain moisture. I have found the new taters will grow all the way out into the middle of the rows, some the size of footballs, ( a little exageration, but not much), and seldom find any sunburnt taters. Once the taters are dug, I till the decayed mulch back into the soil. I do similar to planting onions and always have baseball size onions. My personal belief is that taters and onions dont grow down into the soil, they like to grow out. Making wide hills with plenty of mulching material seems to work for me. I plant about 30lb of seed taters yearly, which give me 4-60ft rows, so I aint trying to grow on a large scale
 
   / Hiller stage 1 #14  
Last year I just planted what ever potatoes I could get my hands on. This year I'm debating if I'll do specific varieties or not. I also did a couple sweet potatoes a bit later as an experiment and those came out pretty good too so I'm going to do more of those.

Last year I dug a pretty deep trench that I set the potatoes into, but having read y'alls posts I'll definitely try planting them much more shallow. I'm new at all this. Funny given I spent quite a few years earlier in life working for a produce farmer who had his own market but mostly he dealt with the crops for the market and had me working fields for stuff like soya beans or corn or wheat etc. I kick myself for not paying more attention to the growing process.

Thanks for the info though! And my apologies for the hijacking of the thread. I haven't looked but if not maybe we should start a look what I'm growing thread.

E.
 
   / Hiller stage 1 #15  
My thought is its not how deep the taters are planted, its how wide the hills. I want loose dirt under the plants and the hills wide enough to keep the taters from busting out of the rows.

I like the op's hiller, beats walking behind a tiller. I do think I would take it one step further by adding a seat and a drop pipe to drop the taters and cover them at the same time.
 
   / Hiller stage 1
  • Thread Starter
#16  
My thought is its not how deep the taters are planted, its how wide the hills. I want loose dirt under the plants and the hills wide enough to keep the taters from busting out of the rows.

I like the op's hiller, beats walking behind a tiller. I do think I would take it one step further by adding a seat and a drop pipe to drop the taters and cover them at the same time.

Now that sounds like a mod to do this summer! Thanks for the idea
 
   / Hiller stage 1 #17  
I like the op's hiller, beats walking behind a tiller. I do think I would take it one step further by adding a seat and a drop pipe to drop the taters and cover them at the same time.


You'd never convince my wife to use it. Her theory is potatoes do best if you carefully lay them in the row with the sprout pointing up, versus merely pitching it in and covering. She won't plant them until they have a sprout out 2-4".

I tend to think you can pitch them in the row and they will grow no matter what.....just might take a bit longer for the plant top to appear. I can't imagine commercial planting like the wife does it, but she does get fairly quick results with tops....so maybe she has a point....we're eating new potatoes for lunch today !
 
   / Hiller stage 1 #18  
Now that sounds like a mod to do this summer! Thanks for the idea

Yep, find you a old lawn mower sulkey for a seat, a 3in piece of PVC to drop the taters down, and someone brave enough to ride behind you and drop the spuds. I have actually seen old tobacco planters used for planting taters. Instead of dropping tobacco plants, they dropped spuds. I almost bought a tobacco planter just for that purpose, but I dont plant enough taters to justify the equipment cost.
 
   / Hiller stage 1 #19  
Lol I spent many hours on the seat of a transplanter planting peppers and damned if I remember what else. It be fun to do but my garden isn't big enough and there's just me, myself and I here and we're all fighting to drive the tractor so no one to sit on the transplanter. ;)

E.
 
   / Hiller stage 1
  • Thread Starter
#20  
Lol I spent many hours on the seat of a transplanter planting peppers and damned if I remember what else. It be fun to do but my garden isn't big enough and there's just me, myself and I here and we're all fighting to drive the tractor so no one to sit on the transplanter. ;)

E.

you just need a few 45* elbows and and longer PVC pipe :laughing:

I have only sat on a tobacco planter once, I think that was our 3rd or 4th date 17 years ago :D
 

Tractor & Equipment Auctions

25 TANDEM DUAL GOOSENECK TRAILER (A55745)
25 TANDEM DUAL...
ALLMAND NIGHT-LIGHT PRO 4 BULB LIGHT PLANT (A52706)
ALLMAND...
KUBOTA ZG23F ZERO TURN LAWN MOWER (A60430)
KUBOTA ZG23F ZERO...
9ft. Flatbed Truck Body with Gooseneck Connection (A59230)
9ft. Flatbed Truck...
2021 Ver-Mac PCMS-3812 Solar S/A Towable Trailer Message Board (A55973)
2021 Ver-Mac...
Rotary SPOA9-200 Automotive Lift (A56857)
Rotary SPOA9-200...
 
Top