Saw this on our local Craigs list. Seems cheap enough but maybe to many miles between where needed? John Deere 666 Snowblower
snowblower
- Thread starter winston1
- Start date
- Views: 3911
tman1020
Veteran Member
- Joined
- Jan 16, 2014
- Messages
- 1,467
- Location
- north west indiana
- Tractor
- Bobcat ct225 and Bad Boy zero turn
Why the heck is there a snow blower in Texas? Understandably cheap.
Neat 1500
Platinum Member
Maybe he knows something you don't... :laughing:
MesaAZguy
Silver Member
- Joined
- Jan 13, 2016
- Messages
- 115
- Location
- Ozark, MO Formerly Mesa, AZ
- Tractor
- Kioti 2620 Cab current, Yanmar 1802d former
Probably moved to TX from a snow state
careyo63
Elite Member
- Joined
- Jan 6, 2012
- Messages
- 2,737
- Tractor
- 77 Yanmar YM2000 63 Ford 2000
I thought that also. And kept it to see if it would blow sand as well.
MinnesotaEric
Super Member
That blower is made by McKee for Deere. They invented the modern two-stage blower. You want to look at the lower three point to make sure they are not bent from backing into something that didn't move. You want to spin the auger to make certain it is straight. Under and behind the auger is a blade, inspect it for wear. The gearbox is likely okay, but make certain there is oil in it and that the seals haven't failed.
I believe the 320 is the same thing as the John Deere 666 snowblower.
Attachments
bmaverick
Super Member
- Joined
- Sep 17, 2013
- Messages
- 6,945
- Location
- Beloit-WI
- Tractor
- Yanmar YM2610 ■YANMAR GURU■ EXTRAORDINAIRE
So, this is the snowblower from HELLL. 
When HELLL freezes over it's only to be used. :confused2: And yes, it was found in Texas.
Something is very strange about all of this.
I knew Texans always prepared, ... even for the Apocalypse!
Happy New Year into 2020 we go!
When HELLL freezes over it's only to be used. :confused2: And yes, it was found in Texas. Something is very strange about all of this.
I knew Texans always prepared, ... even for the Apocalypse!
Happy New Year into 2020 we go!
CobyRupert
Super Member
^What Eric says. :thumbsup:
My understanding is the gap between the fan blades and the fan's housing is also significant on how far (efficient?) it will through snow (in addition to the fan speed itself).
Edit: 2016 post. Probably sold by now.
My understanding is the gap between the fan blades and the fan's housing is also significant on how far (efficient?) it will through snow (in addition to the fan speed itself).
Edit: 2016 post. Probably sold by now.
CobyRupert
Super Member
So, this is the snowblower from HELLL.
Something is very strange about all of this.
I knew Texans always prepared, ... even for the Apocalypse!
Happy New Year into 2020 we go!
....well, it is model 666!
...yep, must be for when **** freezes over. This goes along with this Yankee's theory that Texas and **** are the same place. :stirthepot: :stirthepot: :laughing:
