M9540 3PH Problem

KEEPBALINTX · Oct 26, 2014

I can't slide the telescoping part of the right lower arm all the way in and it won't engage the pin. I tried scraping out all the dirt I could from the inside but it still won't retract all the way. Anybody got an idea? The left side is fine.

Thanks in advance.

Jeff

TomSeller · Oct 26, 2014

Have you tried working some oil into it to free it up? Not many Kubota M9540 owners on TBN that I can recall. Mind posting some pictures?

KEEPBALINTX · Oct 26, 2014

TomSeller said:
Have you tried working some oil into it to free it up? Not many Kubota M9540 owners on TBN that I can recall. Mind posting some pictures?

Well actually I had completely disassembled it to clean it out so it was free but anyway I just took it apart again and really scraped it hard with a pointed tool and more rusty dirt came out and was enough to fix it.

Thanks for the help.

Jeff

TomSeller · Oct 26, 2014

KEEPBALINTX said:
Well actually I had completely disassembled it to clean it out so it was free but anyway I just took it apart again and really scraped it hard with a pointed tool and more rusty dirt came out and was enough to fix it.

Thanks for the help.

Jeff

Good news. Can we still get a picture?