Newbie with broken Yanmar 1510D

[rvennerbeck]

Hi,
Dick Vennerbeck in the Los Gatos Mountains 50 miles south of San Francisco. I have a dead 1510D that spent most of it's life half submerged in rice paddies somewhere. My left front knuckle is total is total dust housing is not repairable and gears are gone completely. I'm looking for a left front knuckle ar whole front axle assy. Hoye has been an excellent source of parts but cannot help me with this one. I have already hit Hoye and a few others. I need to find one that is dead in someone's back 40. Or, I'll have one to part out.

 

[Oona]

Welcome! I moved your thread into the Yanmar section so more of our members will see your post and give you some feedback! Thanks for joining!

 

[California]

Welcome Dick. I'm some 150 miles north of you. I have a YM186D, the similar US version. There seem to be more of these parted out or on blocks after a hard life, for some reason. The front axle is very different but if the gear ratios are the same, it might be easier to find and would serve.

Here's a canned Google search that does a Craigslist nationwide search, limited to recent listings. You might want to edit this (use the Advanced options) to meet your needs.

Good luck with this.

 

[Smoody]

ahhh, the drawbacks to 4wd........hope you find what you need.

 

[choffman41]

Try Parker equip (1Danny on this forum). I've gotten some front axle parts for my 2301D from him. Good service and reasonable price.
Untitled

 

[don nelson]

Dick I to have a 1510 and need the right 4x4 hub I could get by with the gear that the front drive shaft goes into the hub. It is part # 17 194441-13520 can we talk call don nelson #2o9 743 5066 thanks

Hi,
Dick Vennerbeck in the Los Gatos Mountains 50 miles south of San Francisco. I have a dead 1510D that spent most of it's life half submerged in rice paddies somewhere. My left front knuckle is total is total dust housing is not repairable and gears are gone completely. I'm looking for a left front knuckle ar whole front axle assy. Hoye has been an excellent source of parts but cannot help me with this one. I have already hit Hoye and a few others. I need to find one that is dead in someone's back 40. Or, I'll have one to part out.

 

[kenmac]

Dick I to have a 1510 and need the right 4x4 hub I could get by with the gear that the front drive shaft goes into the hub. It is part # 17 194441-13520 can we talk call don nelson #2o9 743 5066 thanks

Welcome to the site:welcome:

Dick hasn't been around since 2010. If you need yanmar parts. Try 1 of the suppliers. hoye that has an add at the top of the page hoyetractorparts.com or fredricksequipment.com. Coldwater is also an advertiser here that may be able to supply you the parts you need