Just got My 390 back .

[NIXON]

She might not be a world beater , but I'm pleased ! This is running an 8 pin rim sprocket .
[ame=http://www.youtube.com/watch?v=7xHXQtSDqfU&feature=related]Nixon stock 390xp before porting - YouTube[/ame]
[ame=http://www.youtube.com/watch?v=0wG4T_NVsQg&lr=1&feature=mhee]Nixon 390xp after porting - YouTube[/ame]

the 372 is boxed up for porting .
I'm sure that someone will come along and tell Me that a Dolmar would have been a better choice of saw .

 

[xyz123]

Looks like your hooked. Only complaint is your heading of thread . When you said 390 I thought you were talking about a 65cc plastic saw not a 88cc XP :thumbsup:

 

[NIXON]

Looks like your hooked. Only complaint is your heading of thread . When you said 390 I thought you were talking about a 65cc plastic saw not a 88cc XP :thumbsup:

You might be right about the hooked part ,but I'm not sure about it just yet . after the 372, the 346 oe will be sent for a bit of tweaking as well . If I do my 044 and 562..... Well then maybe I'll admit to CAD .

 

[LD1]

Definatally an improvement:thumbsup:

But I have to agree with xyz123.

Next time you want to talk about that saw...PLEASE say 390XP

 

[NIXON]

we cant see your sig line when browsing threads on the main page:thumbsup:

WE ? sorry , I see Your point .

 

[LD1]

WE ? sorry , I see Your point .

WE= everyone that sees the title when browsing posts:thumbsup:

still a very nice saw. now all you need is a dolmar or three:thumbsup:

 

[NIXON]

WE= everyone that sees the title when browsing posts:thumbsup:

still a very nice saw. now all you need is a dolmar or three:thumbsup:

I knew you'd come through with the inevitable Dolmar recommendation .
Trust Me , if there was a dealership here that was worth a **** , I'd likely own a 5100 or a 5105 ,and a 7900 . They seem very well made . Too bad that their sales network seems more like a hobby than a bussiness .
Oh, and I knew what the We reference was ..... Just pulling your chain . I love it when folks get into the junior mod mode in a sub forum . ( more chain pulling )

 

[LD1]

I knew you'd come through with the inevitable Dolmar recommendation .

As always

They seem very well made . Too bad that their sales network seems more like a hobby than a bussiness .

They are. And agreed

Oh, and I knew what the We reference was

I knew you did I figured with over 1k posts, either you knew....or you were an idiot. And since you have a 390xp, I didnt peg you for being an idiot:laughing:

 

[NIXON]

I knew you did I figured with over 1k posts, either you knew....or you were an idiot. And since you have a 390xp, I didnt peg you for being an idiot:laughing:

obviously you have never met, or talked to my wife ,and neighbors ! 372XP videoes within the next week to ten days . ;-)

 

[xyz123]

you going with 50mm oem , 51.44mm oem , 52mm afm top on the 372 for porting?

 

[NIXON]

you going with 50mm oem , 51.44mm oem , 52mm afm top on the 372 for porting?

That would be a question to ask the porter of the saw .

 

[xyz123]

That would be a question to ask the porter of the saw .

Well whats on it when you send it to him? I know T likes the 51.44mm best. I would go oem for sure.

 

[NIXON]

Well whats on it when you send it to him? I know T likes the 51.44mm best. I would go oem for sure.

Sorry, just wasn't sure of the bore . Had to look it up . It's 50mm.
Husqvarna seems to like to change things a lot ,don't they ?
Btw ! Chainsaw repair is a very nice site !!

 

[NIXON]

At any rate the 372 is in the mail ,on it's way for tweaking . Hopefully I'll get some videos to post .

 

[RobertN]

I misread the title and thought it was 090...

There's on in Napa for $1k; an 090G with 60" bar...