Most useful attachments that I can make?

[Chain Bender]

You need to make a trailer mover tool for moving just about everything. Make sure you use a old reciever from a truck. This will allow you to change ball sizes, flat farm trailer ,and pintle type hook ups. The upright where your top link hooks should have a 2&5/16 '' ball on it for moving goosenecks.

XXXXXXXXXXXXX

I don't have goose neck, but I do use a 2 5/16th ball for my tractor hauler. They are handy, as you said. I use mine for everything, lifting, pulling, moving, stumping (small of course), dragging logs...

CB

 

[IMCA38]

Here's my trailer mover....

 

[IMCA38]

I also made a 3PH dethatcher.

Since this photo was taken, I've painted it all red like the trailer mover.

If you like, read more details here...

http://www.tractorbynet.com/forums/build-yourself/98472-my-3-pt-dethatcher.html

 

[akpilot]

I use my front platform all the time, it's one of handiest things I have built.

 

[Green4310TLB]

Wow that is a wide open question... Living with a long drive way, I think a multi-purpose blade (box) with weights and slots fro hooking a chain would be a starting point for me. I built a bale spear for moving round bales. I would like a root rake or grapple bucket for brush. Pallet forks are always handy. A front pole for setting trusses would be nice. loader mounted snow blower would be cool - but prabably too heavy for my little tractor. A quick set up for adding rear weights would be nice. I am thinking about a heavy duty off road dump trailer project right now... and the list goes on...

 

[EddieWalker]

My drag is something that I use all the time and something that I really like. It was simple to make, and the results that it gives me are very satisfying.

http://www.tractorbynet.com/forums/build-yourself/141756-my-super-duper-drag.html

Eddie

 

[tankerfarmboy]

I have made a bale clamp (not a grapple, grabs the bale sideways), avalanche blade (a plow blade with wings and a drag back function, like the use on pay loaders), pallet forks and a new bucket. Plus I changed my tractor from a regular pin on style to a ALO Quicke attach style loader. Makes life so much easier.

 

[wawajake]

I made this over past two weeks . Painted it last night.
All scrap metal I already had, but drillbits and sawsall blades , pins etc cost me $100
I used an old engine cradle that had casters removed, and used a old sattelite dish round circle thing, for swivel and pins set up, and I had an old cutting edge I cut down to 54 inches and tacked a 4 inch angle iron on top of the cutting edge to give the blade some height . Will use it to spread gravel and topsoil.

I also added a trailer ball , I attach a ball to all my attachments in case I need to move the boat or a trailer .

 

[StanR]

I use this a lot

Build thread

http://www.tractorbynet.com/forums/build-yourself/199423-3-pt-multi-purpose-bar.html

 

[Iplayfarmer]

I use this a lot

Build thread

http://www.tractorbynet.com/forums/build-yourself/199423-3-pt-multi-purpose-bar.html

I need to get me something like that. I'd love one of the combination 3 point trailer hitch attachments that has a receiver for a ball mount, a gooseneck ball, and a chain hook. I'd probably use it a lot.