zerts on 2210

deereman64 · Dec 5, 2009

Any ideas on the size of the zerts for the front axle etc for deere 2210?

megotatractor · Dec 5, 2009

As far as what??? They are standard size if you need to replace them, I just grabbed the first pack I saw at the hardware store. Sorry the size is torn off the package.

beenthere · Dec 5, 2009

Yup, zerks are zerks. Threads might differ, but the head is the same.

Dargo · Dec 5, 2009

beenthere said:
Yup, zerks are zerks..

Thank you.

deereman64 · Dec 6, 2009

problem is i went to tractorsupply and they had all different sizes and the tool to remove the zert also came in different sizes. i checked on jdparts and it didnt help

kennyd · Dec 6, 2009

They are 1/8" NPT threaded zerks.

Dargo · Dec 6, 2009

kennyd said:
They are 1/8" NPT threaded zerks.

Just yesterday I bought a 1/8" NPT tap (had some crushed zerks) and a box of about 50 assorted size and assorted angle zerks from Rural King for about $8 total. About an hour and two bloody knuckles later and I was all fixed, greased up and ready to go again.

jenkinsph · Dec 6, 2009

Dargo said:
Just yesterday I bought a 1/8" NPT tap (had some crushed zerks) and a box of about 50 assorted size and assorted angle zerks from Rural King for about $8 total. About an hour and two bloody knuckles later and I was all fixed, greased up and ready to go again.

There you go trying to simplify things again.