zerts on 2210

[deereman64]

Any ideas on the size of the zerts for the front axle etc for deere 2210?

 

[megotatractor]

As far as what??? They are standard size if you need to replace them, I just grabbed the first pack I saw at the hardware store. Sorry the size is torn off the package.

 

[beenthere]

Yup, zerks are zerks. Threads might differ, but the head is the same.

 

[Dargo]

Yup, zerks are zerks..

Thank you.

 

[deereman64]

problem is i went to tractorsupply and they had all different sizes and the tool to remove the zert also came in different sizes. i checked on jdparts and it didnt help

 

[kennyd]

They are 1/8" NPT threaded zerks.

 

[Dargo]

They are 1/8" NPT threaded zerks.

Just yesterday I bought a 1/8" NPT tap (had some crushed zerks) and a box of about 50 assorted size and assorted angle zerks from Rural King for about $8 total. About an hour and two bloody knuckles later and I was all fixed, greased up and ready to go again.

 

[jenkinsph]

Just yesterday I bought a 1/8" NPT tap (had some crushed zerks) and a box of about 50 assorted size and assorted angle zerks from Rural King for about $8 total. About an hour and two bloody knuckles later and I was all fixed, greased up and ready to go again.

There you go trying to simplify things again.