Kubota B2601 0.00 star(s) (0)

2023 Kubota B2601 with 40 hours Bh70 Backhoe LA435 front loader Land Pride RB1660 rear blade Kubota BX2830 commercial snow blower Chains front and rear Led Lights front and rear Titan Steel Forks...

I only have hilly terrain. the property is a series of stone push up benches and the short flats between. Due to this, I tend to move around on the seat quite a bit to stay centered on the...

I was using the York rake trying to improve the steep uphill drive to my place. it's about 1000 feet, and the winter time and truck traffic (garbage, fuel, delivery etc.) makes for a bumpy ride...

Purchased the kits last fall, but with winter, never got to the task of installation. First set is a straight directional control valve, the second set is a DCV with float. I think that...

It is no longer winter, so I went about putting the blowers and blades out of the way on pallets. I took the opportunity to install the Pat's adapters to the Kubota B2601 as the extra length is...

I know this has been talked about often. Does anyone see issues buying a low hour 309 B2601 it is a 2018 model with the L434 loader, 60" belly mower and rear quick connect. The new one has the...

I see pluses and minuses on both. Biggest grip about B is poor seat and location of gas filler cap. Biggest minuses on BX are lower ground clearance reduced lifting and engine having to run higher...

Hello and thanks for any help in advance. While clearing snow with my Kubota B2620 the rear level control lever stopped working with my snowblower all the way up. The lever is all loosey goosey...

I am looking at replacing a John Deere 855 with a 380 frame mounted plow. Does anyone have the Kubota B2601 with the 4 point hitch (B3410 for B01) and the 60" HD front blade (BX2812A)? I would...

Less than 300 hour, 10 years old. Pictures do not make it look beat up, The asking price is what they cost new then. OBRO. I want to move up from the 2wd B7200 HST that gets "yard and...

So next project is going to be some protection from falling limbs, branches and to help protect me when I flop her. (Not if.... I have rolled and flopped too many vehicles to not do it eventually)...

Hi all, Does anyone know if I can use a Kubota FS1000 48" Tiller with the Kubota B2601. My son in law lent me this tiller and I want to be sure that it can be used before I unload it off the...

So talked to salesman he said it's typical, so keep travel pin in. I've never had hydraulics bleed down unless an external leak (don't see) or internal leak by a spool valve with junk. Is this...

I am searching for 3-4 inch wheel spacers... Can someone tell me what other kubota models have the same lug pattern and fitness as my B2601? Thanks

What hydraulic side link are you using for a Kubota B2601? I'm adding Top&Tilt and found the appropriate hydraulic top link at Summit, but they didn't know what side link to provide. The side link...

Hello Everyone: I have been a Kubota owner for quite a few years, starting with a BX2380 and now a B2601. I loved my BX2380 and ended up with about 350 hours on it before selling and upgrading...

I've got a B2601, and theres a good deal for a RCK-54-24B nearby. I know this isn't my model (RCK54-34). What kinds of issues/modifications should I expect if I try to make this work? Is this a...

Time for a coolant change on my B2601. Does anyone know if there is a plug or something on the engine to drain the block. I would guess that just removing the lower radiator hose, you would still...

I have the factory third function with the two buttons on the front side of the loader joystick where I hit them all the time. I thought I would get used to them but I don’t seem to be getting any...

I have used both belly and 3 point mowers on other tractors. I get the annoyances and benefits of the two types. My question is this: I have a really soft yard. Which is less likely to tear up the...