Ford FORD1300 4.30 star(s) (3)

Information, reviews, photos, discussion topics, owner pages, and specifications about the Ford FORD1300.
Under 25 HP Tractors

About the Ford FORD1300



Ford FORD1300 Discussions (55)

Here are the most recent FORD1300 topics from our community.
  1. S

    Ford 1300 4x4 not working

    Hi folks, I'm working on a Ford 1300 4x4. The front axle isn't engaging. I've worked on 4x4 tractors before, and the front driveline is usually pretty straightforward, just gears and shafts with...
  2. S

    Ford 1300 4x4 not working

    Hi folks, I'm working on a Ford 1300 4x4. The front axle isn't engaging. I've worked on 4x4 tractors before, and the front driveline is usually pretty straightforward, just gears and shafts with...
  3. S

    Ford 1300 fuel filter housing

    Looking for a fuel filter housing for a Ford 1300 -the nut that holds the filter on is cross threaded
  4. A

    Ford 1300 no charge

    Hello all. I’ve got a ford 1300 tractor 2wd with turf tires I use around the property. For some reason the charging system has failed. I have replaced the alternator and the voltage regulator...
  5. 0

    ford 1300 fuel problem

    looking for info on how injection pumps work. last summer my ford 1300 started stalling or being fuel starved. i bled the injectors and got it running but it would soon quit again. i found the...
  6. J

    help with a ford 1300 4dw

    help with a ford 1300 4dw Good morning friends I just bought a broken ford 1300 4wd some parts are missing but I can't find a special part available, someone could help me Giving me measurements...
  7. J

    help with front axle bracket ford 1300 4wd

    hola compré un tractor 1300 4dw roto pero no tiene el soporte del eje delantero, ¿alguien puede ayudarme dándome las medidas para que pueda hacerlo yo mismo?He tratado de conseguirlo sin éxito en...
  8. chumly2071

    Ford 1300 hydraulics return to tank port location

    Reaching here, as these tractors are now almost 40 years old, so probably not a lot of current owners out there I've been searching, and looking at the parts diagrams on the New Holland website...
  9. S

    79' Ford 1300 4WD

    So this thread will be an on going project. I bought a 79' 1300 4WD with a Schwartz 1200 FEL. It is lacking on power being 0.8L and rated for 16hp. SO I made the only logical decision and bought...
  10. P

    Rebuilt ford 1300, no oil to top

    Hey everyone, I'm hoping someone can tell me what I did wrong. I rebuilt my shibara LEK802D Diesel engine, put it all back together and it ran fine. I worked it all day blowing snow and when I...
  11. R

    Ford 1300 bought 1980 Lookin for a front end loader

    If any one has one I'am interested. Right now only three point hitch..... Thanks Robo
  12. Y

    Disk vs Tiller for Ford 1300

    I recently bought a Ford 1300 to work on the 5 acres we bought and built on here in Alabama. The dirt here is red clay. Lots of red clay. I need to break the ground up and seed grass on about an...
  13. W

    Ford 1300 value help please

    Well its time for me to upgrade to some horsepower so I can mow and get some much needed power steering. The boss lady even gave me the go ahead. I do nee to sell my 1980 Ford 1300 first. I got...
  14. CTPhil

    Ford 1300 engine rebuild

    Hello, I'm trying to get some information for a non internet saavy friend. He has a Ford 1300 with the dreaded bad crankshaft. It has a Shibaura 0.8L 2-cyl diesel. He's got a line on a...
  15. 0

    ford 1300 broken off hydraulic fill plug.

    the other day I needed to add hydraulic fluid to my ford 1300 which I accomplished, however as I was reinstalling the fill plug it broke off flush with the top of the housing. this is a plastic...
  16. 0

    ford 1300 hydraulc fill plug

    added hydraulic fluid to my ford 1300 with loader and backhoe. as I was screwing the fill plug back in I broke the top off of it. it seems to be made out of a fiber material or it is just that the...
  17. J

    Ford 1300 electrical problem

    Well, I can blame no one but myself. I installed a 6 volt battery in a 12 volt system. The 1300 started and ran till the job was done. Shut it off and it would barley turn over. Took the...
  18. P

    Ford 1300 Hydraulics

    I have a Ford 1300, is there hydraulic outlets I can use to run a wood spliter? If so how much volume and pressure is there? Where are the outlets? What type of valve do I have to use on it? thank you
  19. J

    Ford 1300 Needing Engine Work

    I found a Ford 1300 with a loader for sale the has engine problems. It has been looked at by the dealer and it needs the crankshaft turned and oversized bearings. I don't have any experience going...
  20. E

    WANTED FRONT RIMS FOR A FORD 1300/1520 TRACTOR

    I AM LOOKING FOR USED FRONT RIMS FOR MY FORD 1300 OR 1520. I HAVE THE REAR WHEELS OFF MY FORD 1520 THAT I PARTED OUT ON MY FORD 1300 AND THEY WORK GOOD. HOWEVER THE FRONT RIMS WERE SHOT ON THE...
[ad placeholder]

User Reviews (3)

Read what TractorByNet members think about the Ford FORD1300 Subcompact Tractor
5
33 %
4
67 %
3
0 %
2
0 %
1
0 %
4.00 star(s)
brightstar

FORD1300 Ford
Small
Model Year: 1981

I really like my tractor but think a larger model is needed for the things I found myself needing it for.

Pros: It's great for flower beds and small gardens.
Cons: I'm always very careful because of its size. Had a MF-135 before this tractor.

5.00 star(s)
blewey

FORD1300 Ford
Good Value
Model Year: 1979

I bought this beat up old thing and it runs pretty good. It has been neglected somewhat but I am catching up on the repairs. I have found new parts as I need them, prices are compatible with the more popular brands. I used it right away to do several projects around the property such as driveway grading, clearing woods and creating burn piles, scraping hills downs, and mainly moving compost piles. I like the features like the way it holds the 3 point at any position use set it. I would like a single stick FOL and a way to run the PTO separate from the driving clutch, but it does everything I've needed. I found that access in/out of the seat is easier than the Yanmars but harder than the newer Kubotas and John Deeres.

Pros: Good value used tractor.
Cons: Access to the seat.

Photo Uploads:

4.00 star(s)
Anonymous Poster

FORD1300 Ford
Ford 1300 Owner
Model Year: 1979

I have had this tractor for nine years now and it has been a good tractor for me. I mow 4 acres with a King Kutter mower. I also got the mid mount mower with it, but I like the ease and convenience of the tph mower. I also have an Allied 60 inch snowblower to clean out my 300 feet driveway and large turnaround. We have had an average winter this year and it got a workout. The last few years we have had record snowfalls (lake effect snow) and it had never failed me.

Pros: Works for me
Cons: Could use more horsepower

Photo Uploads:

[ad placeholder]

Ford FORD1300 Owner Pages

View owner pages to see photos, customization and comments about member-owner Ford FORD1300s

Ford FORD1300 Community Rankings

#175 user rating of 731 Under 25 HP Tractors items
#589 Viewed of 731 Under 25 HP Tractors items
#53 discussed of 731 Under 25 HP Tractors items
#1244 user rating of 19625 items overall
#6038 Viewed of 19625 items overall
#285 discussed of 19625 items overall
#11 Ranking of Most-OwnerPages in 19625 items overall
Top