Any way of telling what year my inherited Farmall Super A is. The label under seat is unreadable.

How do I tell the year of my Farmall Super A? Thanks

I inherited a Farmall super A, it's been sitting a few years, I know battery is dead. Connected a good battery by booster cables, barely turns over twice and stops. Took starter off connected...

I have a Super A that the touch control lifts stopped working. Has fluid both front and rear are not working. I used one day and started hearing a ticking noise like the fan hitting something. The...

Had my old tractor freeze , I think, you can pour water in radiator and hear it running into the oil pan. I stopped right there thinking it is trashed. Anyone have a good guess where the weak spot...

I have a Super A Farmall that the clutch was stuck. There wasn't any resistance when pushing the clutch pedal. We loosened the pressure plate bolts several turns and then jarred it with a hammer...

I just inherited a 4 cylinder Super A tractor. I can get it to run by spraying starter fluid in the air intake side of the carburetor. I am not getting a good flow out the bottom of the carburetor...

what I know: Farmall 1952 or 58 super A hydraulics mid and rear it has 2 "diggers"/cultivators on rear arms and 4 on mid chassis lift it has rear pto and belt out put (for saw mills, seller told...

So... yeah. I've got little hands, but there are limits. Anyone ever pull this particular stupid before? Any idea of an easy way to fix it? Coupler practically fell onto the fitting - not...

Hello Guys, I have a strange problem going on with my Framall Super A. I just got her going again, having sat for nearly 3 years and I replaced the Carb with a Rebuilt Zenith carb. Problem is I...

I had to split the tractor to do a freeze plug, so I had to drain the hydro oil. Now that the tractor is back together I filled the hydro reservoir, but the oil is not getting to the pump, is...

Hello, this is my first post, I hope I'm in the right spot. I have a 1947 Farmall Super A, I'm in the process of replacing the freeze plug on the back side of the engine. I have the tractor split...

I have a 1954 Super A that has sat for a couple of years due to my working out of town. Took a week off and went to start it up. It had been converted to a 12 volt system before I purchased the...

My farmall super a

I had been working on the Steering Box of our 1952 Farmall Super A and had the front end slightly elevated -- I had to suspend the work for a month while our Grandsons visited and have noticed a...

I have a 1953 Farmall Super A, 6-volt, positive ground. I have replaced the gasket to the hydraulic chamber, drained the hydraulic chamber, and cleaned the filter. I have replaced the hydraulic...

Got a Farmall Super A that has been sitting for several years and after it was started the tractor would not move. It had been sitting inside but the clutch is stuck. I was wondering what would be...

About 4 years a go i rebuilt a Framall Super A Demostrator,And Yes it is White. I Had to Sell it and now looking to see if it is still around . .The older Gentelman that picked it up was from...

hello, im new here and really need some help. my super a runs good and everything but if you put the clutch in it will grind going into gear and when you let the clutch out it will make a loud...

I inherited a Super A so I'm not sure what age it is but smokes a lot while its running. What could be the problem? Also it will run for about a hour then cut off, hit the starter and it will...

aquired a rebuilt farmall super a but, tractor was was rebuilt from from various farmalls. i am trying to determine engine model /year. any help would be greatly appreciated. thank you in advance

Hello folks. I am a newby so bear with me, all guidance appreciated. I have a Farmall Super A / McCormick that I can't keep running. I can crank it with the choke pulled and it will idle, but try...

Farmall super A. Having stall issues after tractor is warmed up (about 10 minutes). Changed the points, which elongated the time before the stalling begins (from 3 minutes to 10). If I full choke...

I have a 1947 Farmall Super A that needs a head gasket. The linkage from the governor broke and the engine over-reved. Luckily the only thing damaged was the head gasket. I have the mechanical...

Hello all I have a 1952 Farmall Super A Tractor and it sat for over a year and when I went to start it I noticed water in the oil. Is this common or do I have a bad situation on my hands? Now the...

Can anyone tell me if cultivators for a Farmall A wil fit on a Farmall Super A?Thanks

Just bought a Farmall Super A and have a slight problem. Wondered if anyone could help the determine what the problem might be. The tractor cranks good but choke has to be open slightly...

I did this you tube thing about my Farmall Super A. YouTube - How to crank up a Farmall tractor walkin2e

Hey all- I'm getting ready to sell my 1952 Farmall Super A and I don't know what to ask for it. It's in fair shape. The paint is older. Engine runs great with no smoke. The clutch will be...

My boss has asked me to inquire about a Farmall Super A that he saw in a paper. I know nothing about these older tractors. Can someone instruct me as to what I need to look for or be aware of? The...

Farmall super A 1950\'s Need to get a parts breakdown for a Super A, mainly for the rear end. Have some leaking going on around some bearings. Can someone lead me in the right direction?

What's a fair price for a 1954 Farmall "Super A". Very good to Excellent condition, except no hydraulics. No implements. Thanks, - Patrick

My Brother acquired a Farmall Super A in good original condition. (Stickers Electric etc.) With a rather worn rough cut mower. What is a good price range to ask for this tractor? He got it...

I've been unlucky enough to bend the oil pan on my Farmall Super A tractor with the "bedding feet" from the front lift attachments. Not only that, but I punched a hole in the oil pan. I was...

Could anyone give me a ballpark figure on the cost of a Super A model International Harvestor. Good condition, has 5ft bush hog, converted to 12volt, 3-point hitch conversion. Thanks!!!