This is for a fire protection sprinklers I'm thinking of building here. I'm wondering if there is a way to use our JD310 loader/backhoe to run an irrigation pump. I'd like to pull water from an...

For some reason the steering is ok if I am going straight, but once I make a hard left or right it starts to track wrong and tire digs in. I lefted all four wheel off the ground and it works aok...

Hello all. This is my first post. I have 1995 John Deere 310d and I’m looking for the location of the neutral safety switch. The backhoe is Acting like its not in neutral and doesn’t start with...

I have a leak at the control valve of my 74' JD 310. There was no o ring on the top of the control under the plastic rubber and washer. I put one there and I still have a leak. Now it looks like...

Need diagram for Hydraulic system on JD 310 backhoe, showing location of check and pressure valves. Any help would be appreciated. Thanks is advance.

Last month I posted in the Construction Machine forum here on TBN about a temperature gauge & F450 error code problem with our John Deere 310 TLB. The problem hasn't gone away, so I'm going to...

We have a KB2385 with another serious metal problem. Maybe abuse, or maybe just metal fatigue. The machine shop said they would weld the breaks and add additonal metal support. Has anyone had...

Looking for a source for steering linkage parts and other parts for a early to mid 70s 310 loader/backhoe. Any help would be greatly appreciated.

Hi everybody, Would anyone have any insight on the order you should reinstall a torque converter and reverser on a'97 JD 310D Backhoe? I got one mechanic telling me to install the torque...

Plain JD310, early 70's backhoe/loader. I bought it a couple years ago and just now getting around to working on it. All hydraulics work, 3cyl. diesel engine runs great. Rear seal is shot, had to...

Does anyone know the adjustment spec. that controls the loader bucket tilt? I'd sure like for the loader bucketto tilt back another inch or two....and not to do so much automatic untilt the bucket...

I got on my backhoe and wouldnt go in reverse...what th

Hi All, After much searching i pulled the trigger on a 310D. It was the 4wd that sealed the deal for me even though it was a little out of my price range. Its been a great machine, I use it for...

How much is a 1975 John Deer 310 Backhoe selling for, assuming it runs and everything works on it. Runs good and hydraulics work well. 3 cylinder diesel.

Im the maintenance supervisor at a private lake association. glad to be here and ill be asking lots of questions in the future!

Hi All, After several months of looking I finally pulled the trigger on a back hoe loader. Shes got 5,500 hours, one owner and though the engine is smooth, she needs TLC. A bunch of the cylinders...

Hello, We've been getting sluggish performance out of the FEL on our 310 and sometimes there's pulsing as it lifts up. Usually, adding fluid (there are a couple leaky hoses) seems to fix it, but...

Any idea what's up with the hydraulic oil on this JD310SG? After running it for a month it works fine, and the level seemed about right in the sight glass when I got it....maybe a little high but...

What is the theory of operation for the Aux hydraulics on the John Deere 310D dipper ports. I would like to use the aux hydraulics ports for powering a log splitter hydraulic ram attachment. Just...

Hello all....if someone knows of a nice backhoe/loader like the JD or Cat please email me privately. Looking for a keeper with an extendahoe, 4x4, with cab, under 5000 hrs and in very nice...

We have a Kubota M59 and an old JD Ag with loader, but could use a heavier commercial backhoe/loader to help with the rebuilding from our flood last year. Only trouble is I don't know the machines...

Hi, I have an early 70s John Deere 310 backhoe. Today I was using it and as I was driving around it just stopped running with no waring. It's something electrical since when I turn the key on...

Everything was working great... was backing up after dumping the front loader bucket, and the tractor stopped as if I pushed in the clutch. All the hydraulics stopped working, no deterioration of...

My neighbors 310d backhoe has been given him fits . He has been having to cycle the brake switch to get it to go in F and R so I decided to check it out for him. What I have found is a chattering...

Bought a JD 310D at a county auction. It worked fine. Was told by county it worked fine. Had it picked up and delivered. Everything worked fine. I was not around when shop man brought it into the...

Hello everyone, John here... I just picked up a jd 310 because as the fellow went into a pile, it just stopped moving..... No fwd or rev.... 3 cyl runs well, and all works well.... Anyone have any...

My JD 310d will not go into 1st gear. Please tell me the correct way to adjust shift lever? Thanks RT.

Steering problems. have to turn wheel several times for it to turn and then the wheel go back straight on their own. Any ideas of what might be the problem?

Got on my backhoe the other day and it started right up checked all fluid levels pulled lever down to back up and tractor didn't move pushed lever forward and it didn't move noticed a warning...

Yesterday i got my hoe out from sitting inside all winter, the steering is locking up, if you just bump the loader lever it frees it up just for a second, When i bought it, it had a new hyd pump...

I have a 310 backhoe we were using and it quit digging with the bucket figured the way it acted we pulled cylinder and rebuilt it the bucket will curl out but curls in real slow fluid and filters...

Hi, I currently have a 1996 John Deere 310D, which is equipped with a cooler that has 3 coolers in one for the hydraulics. The bottom cooler (not sure what it is for) started to leak. I took...

looking for a pictorial of all the lube points on a '92 310D backhoe and front bucket linkage. thanks EJ

Does any one know if there is a special tool to remove the bolt from the top of the starter? sockets, opened end and closed end wrenches don't work. Tried to remove solenoid but wont dislodge...

Hello All, Last fall I purchased a 1994 JD 310D 4x4 backhoe with about 7500 hours on it. The machine has been wonderful, but twice now I have encountered problems with the shuttle shift not...

Anyone know the technique, trick, secret or special tool needed to remove the boom cylinder on a 1992 JD 310d backhoe/loader? I know this isn't a "tractor" question, but I am trying to help my...