I bought a used 4700 with HST. Tractor engine runs fantastic. it drives very well except when you let off the forward pedal. it still wants to drive forward ( more or less inching. if I hit the...
HI, guys the front seals are leaking on my JD 4700 4x4. I was wondering if anyone can tell me how long of a job it would be to replace them? And do I need any special tools to complete the job...
I have a John Deere 4700, 460 loader, 48 backhoe. Altogether, it weighs just over 6000 lbs according to my estimates
I am looking for a 10k lb trailer to transport my JD a tractor a short...
I was using my JD 4700 Power Reverser today. However, when moving some wood I heard a "thud" or "clunk" and the tractor would not go in gear. After trying different gear ranges with no success...
Hello
I want to put a grapple bucket on my John Deere 4700 Power Reverser. Currently I have a 460 loader and 48 back hoe on the unit.
What 3r valve kit do I need ? Where is the best place to...
Hi Everyone
I posted about a 4700 I was getting with an hydraulic leak coming from the bell house a while ago, That is now the least of my worries.
I went to go it today and drive it home which...
Hi Everyone
Not sure how this site works as I am a newbie. I posted this on the main forum page and then saw the JD specific forum and thought I would post it here.
I inherited a 2001, 4700 4X4...
Hi Everyone
I inherited a 2001, 4700 4X4 with loader and Hydro transmission. It has approximately 3,500hrs on it. My Uncle owned it from new and took extremely good care of it. All maintenances...
I made a deposit on a 2000 John Deere 4700, Power Reverser, 4x4, 400X loader, Curtis hard-sided cab. The tractor is about 7 hours away and I will be traveling to do a final inspection and if OK...
I have a john deere 4700 power reverser trans when I got it the tractor had sat for approx 5 years after several hydraulic oil changes and screen cleaning finally got all my hydraulic to work...
Hello, I know there has been talk about the JD 4000 Series Fuel shut off solenoid causing starting problems.
Because it was on this forum that I learned I had to replace mine.
Well I replaced it...
I have a John Deere 4700 and the three point hitch will lift but will only drop half way it was fine until I raised it last night while cutting with bush hog. Does anyone have any suggestions...
I have a john Deere 4700 hst that the forward pedal has no tension on it, the tractor will barely creep forward. The reverse is working great, no issues with the pedal. Anyone know what's wrong...
Hi, This is my 1st post. I just bought a JD 4700 with a power reverser trans. When I start the tractor and put the power reverser lever in forward or reverse the tractor stall. The tractor worked...
I just got a used JD 4700 with 16.9x20 and 10- 15
, rim front tires, both sets turf tires.
I want to replace them with either R4 pr R 1 tires., probably
16.9x 24 R 1 on the back and 10- 16.5...
New to forum, please forgive me.
This noise happens worse when no attachment is hooked up & I crank tractor.
Noise is still present engaging & disengaging the PTO.
Seems to click when pto...
Need help with the fender the dealer installed on my 4700. There are two square holes, which do not appear to be required to mount to my chassis. Tractor was inside my pole barn, when the snow...
Was working fine the other day, next morning all it does is crank and won't turn over. Has fuel, all filters are clean, battery is good. :confused2: :confused: :anyone: I am guessing a $225...
I have a 4700 that calls for a valve adjustment. Has anyone here ever done that or know of a reference to how it's done? I have adjusted valves in cars, trucks, & motorcycles but never a John...
Looking to purchase a woods backhoe sub frame for my john deere 4700 so I can attach my woods 7500 backhoe attachment. Any one have any ideas of where to locate this woods sub-frame mounting kit...
Last summer I was running the tractor and noticed that the FEL was jerking/shuddering when being raised. The tractor needed engine oil/filter, coolant and hydraulic fluid/filter changes so I...
I am considering buying a JD4700 with 1800 hours. I have had a few HST tractors that feel ike they are straining under load. this tractor whines and shutters more then others I am used to. It...
The front right axle on my jd4700 has a slight leak. It is not a gusher. However, I would like to have new seals installed. Pending no other problems how much can I expect to pay????
Thanks
Al
Hello all! It's been a while since I have been on this forum. Anyhow, getting ready to get a John Deere 4700 4WD with loader. I have narrowed down my search and the seller is scheduled bring...
I went to hookup my shredder to my JD4700 and when I wanted to engage the the PTO, the engage light came on but the PTO would not spin. Someone has told me there might be a fuse that controls...
I need a new bush hog. I sold the JD light duty one. Not impressed with it. I'm considering the JD MX6 vs the King Kutter Heavy duty 6 ft rotary cutter. They weigh the same. Any thoughts? Used for...
I looked at a JD4700 yesterday with a 460 FEL and MFWD. Looks pretty nice and the dealer is asking 20500.00 Can anyone give any advice on this model and it sounds like there is a little room to...
It was suggested I post this on the JD Owning/Operating forum as well.
I am having starting problems with my JD 4700 Compact. Here are the symptoms:
1) Engine turns over fine
2) Plenty of fuel...
I submitted an earlier post about not being able to start my JD 4700 Compact, but this post is related to a fuel gauge problem relating to one of the repair attempts.
When my tractor was returned...
I am having starting problems with my JD 4700 Compact. Here are the symptoms:
1) Engine turns over fine
2) Plenty of fuel
3) All filters/strainers are clean
4) Never fires
I have had the dealer...
JD 4700 PTO Won\'t Engage??? Help???
I hooked up my bush hog today and expected to promptly cut 7 acres of month old growth. I set my rpms to 2600 on the PTO mark, made sure I was in neutral and...
I am starting a small tree farm and I'm in need of some help. I have 170 acres of mixed hardwoods and cultivated fields. My tree farm will total about 20 acres. I am looking for a tractor that...
I was planning to purchase a JD 4700 this Spring until I heard JD is coming out with a JD4710. Big difference I heard is the added electronic HST. Can anyone comment on this? What are advantages...
If anyone is interested in ordering the Tech Manual and/or parts catalog for the 4700, the "stock numbers" are :
TM1679 ($62.10)
PC2693 ($39.95)
Shipping (in MY case..to Dallas, Oregon -97338)...
I finally got more work lights installed on the 4700. This
was a spur of the moment buying decision on my part but in the end it worked out. I was in a auto parts store and so "Tractor Work...
JD4700 a comin\'
The decision is in - after counting and re-counting (all by hand of course) all of the equipment bids, comparing horsepower per dollar, analyzing re-sale values, considering...
Well, I did it. Last Monday, I bought a JD 4700, MX6 rotary cutter, FEL with 4n1 bucket, JD 48 backhoe, and a boxblade. The equipment was delivered on Friday and I spent all weekend working the...