Zetor 6211 Power Assister Ram Leak

[KevZetor6211]

Hi, I have a 1989 Zetor 6211 for a few years now. I have done a lot of work to it over the years.
the problem I am having is when the tractor is running there is quite a dropping leak of power steering fluid from the power steering ram. It leaks from the beginning of the ram from what looks like a U shaped connection with a bolt that tightens the U clamp.
Is there seals in it or did anyone have this problem as well, I will attach phot (I have the bolt removed in pic)
Thanks

 

[ZetorSteve]

Does the hose that goes to the end of the cylinder housing screw directly to a welded bung or a screwed in fitting?

If it is the welded bung then a 938303 seal kit should cover you.

If it has the screwed in fitting then 938302 is your guy.

 

[ZetorSteve]

Screwed in fitting is 46.

Welded bung cylinder uses no fitting like below. 41 is the hose directly bolted to the cylinder

 

[KevZetor6211]

Hi thanks for the info, I’ll attach photos of the leak still.
Not sure about it as leaking from under the bolt. Thanks