grsthegreat
Super Star Member
I dont work with those suite-case generators, didnt realize they were 2 cycle engines using fuel/oil mix.
Your last generator Maintenance Run
- Thread starter 3930dave
- Start date
- Views: 1042594
LittleBill21
Elite Member
there not, they are 4 cycle
grsthegreat
Super Star Member
Ok, i misinterpreted the 50/50 mix statement, i guess it meant 50% fresh gas with sea foam. My brain just floated over to fuel
il. Minds been on chain saws. Im cutting up a huge pile of trees the power company had to cut while moving power lines to expand freeway. Ill have firewood for 5 years
il. Minds been on chain saws. Im cutting up a huge pile of trees the power company had to cut while moving power lines to expand freeway. Ill have firewood for 5 yearsultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,584
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
I’ve got 2… very compact for the output and one has 50 amp DC boost in addition to AC
I never loan them out because the risk of someone use straight gas is too great
grsthegreat
Super Star Member
I loaned my chain saw to my brother. I told him about mix gas only. He promptly
reminded me he has used chainsaws longer than ive been alive. After using my jug of mix, he ran straight gas. Siezed engine.
Family…..
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,584
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
H
Happens ALL the time… even gas in new Kubota BX with 7 hours… I saw the damage as it was torn down at the dealer…
Last edited:
90cummins
Veteran Member
I’ve always known it’s a big no-no but I’ve never seen/heard of the specific damage, could you elaborate.
Injection pump, piston cylinder damage?
90cummins
daugen
Super Member
you witnessed the autopsy of an engine that was poisoned in a way.
those poor bearings and rings
hmmm, upon rethinking, expect damage to be in piston area and fuel pump, oil is still pumping
Last edited:
daugen
Super Member
it's almost like you should loan your chain saw out with a can of fuel to go with it
if you expect it to come back in one piece
it's too bad there was never an industry color coding for two cycle gas like there is for gas and diesel
if you expect it to come back in one piece
it's too bad there was never an industry color coding for two cycle gas like there is for gas and diesel
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,584
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
The head was off and the mechanic showed me damage to the cylinder walls.
I asked what happened and he said gasoline.