gt14
Silver Member
Does anyone have the specs on a YFL-155 Loader.
Capacity, type and weight of Hydraulic Fluid, Lifting capacity ect.
Capacity, type and weight of Hydraulic Fluid, Lifting capacity ect.
YFL-155 Loader Specs
- Thread starter gt14
- Start date
- Views: 19844
Mickey_Fx
Veteran Member
GT don't have the info you are requesting but want to say you need to pay attention to bucket load. I recently wighed my tractor, did the math and looked at rated tire capacity and found out my front tires are overloaded with nothing in the bucket.
HoyeTractor
Gold Member, Approved Advertiser
swedish-fish
Bronze Member
I also have (what I think is) the YFL-155 on my 155D with front pto mount pump. I am interested in what oil it takes. I have recently used the same hyd/tran fluid (JD303 equivalent) that is used in the transmission/3pt lift. Is this right? The pump seems a bit noisier than what I remember when I bought it used. When activating the loader it quiets right down.
Craig
Craig
swedish-fish
Bronze Member
HoyeTractor
Gold Member, Approved Advertiser
According to the manual it uses the tractor's hydraulic reservoir so it just takes the same oil as the tractor- a JD303 or equivalent oil.
Aaron
Parts@HoyeTractor.com
(940)592-0181
Aaron
Parts@HoyeTractor.com
(940)592-0181
swedish-fish
Bronze Member
Thanks Aaron,
Now I'm questioning whether I actually have the YFL-155 or a Johnson loader as mine has a seperate oil reservior in the right upright and a pump on the front pto but looks very similar to the diagram. I can't find any identifying markings anywhere except for "yanmar".
Sorry, I don't mean to hijack this thread, but my ears perked up because I always learn something from the collective knowledge of you all and I was hoping there was a simple answer as to why the pump is a little noisier since I put hyd/tran JD303 equivalent in it a few months ago.
It's a great little loader! Just my size.
Craig
Now I'm questioning whether I actually have the YFL-155 or a Johnson loader as mine has a seperate oil reservior in the right upright and a pump on the front pto but looks very similar to the diagram. I can't find any identifying markings anywhere except for "yanmar".
Sorry, I don't mean to hijack this thread, but my ears perked up because I always learn something from the collective knowledge of you all and I was hoping there was a simple answer as to why the pump is a little noisier since I put hyd/tran JD303 equivalent in it a few months ago.
It's a great little loader! Just my size.
Craig
Attachments
OP
gt14
Silver Member
HoyeTractor said:
I have a YFL-155 and it's fluid reservoir is in the loaders right arm. I used 46 weight hydraulic fluid. It is completly seperate from the 3point reservoir.
OP
gt14
Silver Member
swedish-fish said:
You have the YFL-155 loader. My loader looks exactly the same. Green color same valve, ect.
OP
gt14
Silver Member
Thanks for the info. I added 46 wt Hydraulic fluid into the loader res. It seems to work well I have had to clean the strainer twice since the loader was sludged up pretty bad. Looks pretty clean now. I have never heard of a loader with the res. Inside the arm of the loader but it seems to work well.
