Yee Hawww
- Thread starter cbturf
- Start date
- Views: 11403
does this look familiar
03-11-2008, 02:48 AM #4 (permalink)
cbturf
Gold Member
Join Date: Feb 2007
Location: Nashville, TN
Posts: 442 Re: gallons for hour or day for Fecon/rayco 90 or 100
--------------------------------------------------------------------------------
My FTX-140 will drain the 52 gallon tank in 10 hours. I do not shut down for anything if I don't have to. I even watch how much I drink an do not eat anything to avoid those shutdowns.
03-11-2008, 02:48 AM #4 (permalink)
cbturf
Gold Member
Join Date: Feb 2007
Location: Nashville, TN
Posts: 442 Re: gallons for hour or day for Fecon/rayco 90 or 100
--------------------------------------------------------------------------------
My FTX-140 will drain the 52 gallon tank in 10 hours. I do not shut down for anything if I don't have to. I even watch how much I drink an do not eat anything to avoid those shutdowns.
OP
cbturf
Gold Member
??? I am confused..What is the point?
OP
cbturf
Gold Member
Just to let you know an M-760 has a C-13 (not a 12) and the minimum fuel burn rate is in the attached spec sheet.
It has a 210 gallon fuel tank (not 190). You could only burn 12 GPH (96 GPD) if you were working at 1100 RPM.
In 2008 I was cutting juniper trees that had been on the ground for 5 years and I was able to stretch a 10 hour day out of a tank of fuel. For the past year and a half I have been cutting live PJ and it drains the tank is 7 hours. I usually fill up and go back in for a few more hours if daylight permits.
You need to fire your coach...for the record I do not believe you own a single M760 much less multiple like your response indicates.
It has a 210 gallon fuel tank (not 190). You could only burn 12 GPH (96 GPD) if you were working at 1100 RPM.
In 2008 I was cutting juniper trees that had been on the ground for 5 years and I was able to stretch a 10 hour day out of a tank of fuel. For the past year and a half I have been cutting live PJ and it drains the tank is 7 hours. I usually fill up and go back in for a few more hours if daylight permits.
You need to fire your coach...for the record I do not believe you own a single M760 much less multiple like your response indicates.
Last edited:
OP
cbturf
Gold Member
I have over three years and 2000 acres of research! No need to call anyone.
WestshoreConstruction
Gold Member
Enlighten us please, what company do you own or do you operate a M760 for someone. Cutting saplings and material under 3" any machine would burn almost nothing. At high idle 2000-2200 a C-13 415hp burns almost 30 GPH not Liters, were smart enough up here to be able to figure out both units. This conversation started off as Mark telling the Forum about his new machine and its turned into some pi$$ing match about how little fuel a particular machine burns. Yours is the major exception to all internal combustion engines. It takes fuel to make power plain and simple. To get back on track Mark i may take a little detour after all and come visit around the 18th of Aug or so. I'm gonna bring some pictures of the Tigercat for your Barko
lol.
WestshoreConstruction
Gold Member
Oy Vey, alright so there's a C-12 in there so its pre 2007. Still doesn't burn 10 GPH. The point is your fuel burn is a little off.. more than a little. Maybe with the Fecon head it burns less than the FAE ? Dunno. Good luck with your mulching
OP
cbturf
Gold Member
Well we finally agree on something. I usually burn 25-50 percent MORE than any manufacturers estimate! Good luck to you in your business
OP
cbturf
Gold Member
30 hours 460 gallons
Eagleview
Veteran Member
That works out to be $81.25 per hour in fuel on this side of the planet . I wonder how much per hour the other costs work out to be , teeth , belts , oil , maintenance , depreciation etc ?
OP
cbturf
Gold Member
Expensive to run. A tube of grease per day replacement etc. But very productive. Outworks my other machines by 2-1 or more. Fuel is 2.50/gallon right now.
Eagleview
Veteran Member
Sounds like a real good thing , I wish I had it .
cann mulching
Bronze Member
HEY guys I got to meet CB today & see his new toy, all I can say is WOW!!!
Although not in action but that thing is a beast to look at, I can just guess what it's like to run, COOL!! Hope you the best CB & Nice to meet you!:thumbsup:
Although not in action but that thing is a beast to look at, I can just guess what it's like to run, COOL!! Hope you the best CB & Nice to meet you!:thumbsup:
