Yanmar RS1400 Tiller
- Thread starter Norm3
- Start date
- Views: 10046
Welcome to TBN. 
Briana03
Elite Member
Hello & WELCOME to TBN!
I moved your thread to the Rototiller Forum.
I moved your thread to the Rototiller Forum.
Last edited:
284 International
Veteran Member
- Joined
- Jun 28, 2010
- Messages
- 1,464
- Tractor
- International Harvester 284
According to Tractor Ernie, to set up the tiller tines is "Easy... point the tip of the tine to the side that the nut bolts on. Remember the bolt head goes in the slot, (not the nut) That's the factory setting."
Sourced here.
According to Mickey_FX in the same thread, and Hoye tractors the orientation of the tines allow you to get different results from the tiller: Piled toward the center for hilling, grooved, or level.
I would assume the factory setting gives smooth dirt, but I don't know. The imported Japanese tillers have a variety of adjustments on them to provide various results in the finished soil.
Sourced here.
According to Mickey_FX in the same thread, and Hoye tractors the orientation of the tines allow you to get different results from the tiller: Piled toward the center for hilling, grooved, or level.
I would assume the factory setting gives smooth dirt, but I don't know. The imported Japanese tillers have a variety of adjustments on them to provide various results in the finished soil.