Yanmar F15D Pics

[mtm88001]

Just thought I would share some pics of my "new" tractor.

This forum is great. I have already learned a lot from reading past forums.

Got my manual in yesterday from Hoye Tractors . Two day shipping.

Thanks everyone.

BTW anyone know what pic #10 says in English

 

[mark777]

Stout looking tractor mtm...

Tell me something, Is that a standard 1 3/8" PTO or am I just seeing it funny??

 

[jimmer2880]

the PTO on my F16d is stubby like that as well. It looks weird, by mine is standard.

Nice looking tractor. Can't wait to see some action shots.

FWIW - I grabbed some scrap lexan from a job-site and replaced the plastic at the front of the foot rests.

 

[BruceR]

Looks good mtm.

Is that a hood ornament or supper ?

Bruce

 

[mtm88001]

Stout looking tractor mtm...

Tell me something, Is that a standard 1 3/8" PTO or am I just seeing it funny??

Here I'll show my lack of knowledge. You would have to explain what a 1 & 3/8" PTO is.

Would 1 3/8 be the diameter or circumference?

I haven't hooked up bush hog yet so I don't know.

 

[oliver28472]

I have a Mits with a pto like that. You're going to need an adaptor. Which way does it turn?

 

[MJPetersen]

Would 1 3/8 be the diameter or circumference?

1 3/8 inches is diameter--the circumference would be about 4.3 inches.

a shaft with a circumference of 1 3/8 would be a little less than 1/2 an inch in diameter.

mike

 

[BTI]

I had an F15D you won't need an adapter unless you just want extra room to hook up.
You WILL need an ORC if rotary cutting etc.


BTI

 

[mtm88001]

1 3/8 inches is diameter--the circumference would be about 4.3 inches.

a shaft with a circumference of 1 3/8 would be a little less than 1/2 an inch in diameter.

mike

The shaft is 1 3/8

This is the end of the yoke that connects to the PTO shaft

The end that connects to the tiller is 1 1/8

Tiller Pics

Thanks for the info.

 

[mtm88001]

BTW: What kind of oil should I put in the tiller. I have a manual for the tractor, but not for the tiller.

I checked the oil in the tiller and it looks murky. Maybe from being submerged in the rice fields.

Anyway I would like to drain all the old stuff out and put in new.

I also started a different thread (should have put all in one), if anyone can help with the controls:
http://www.tractorbynet.com/forums/yanmar/115026-yanmar-f15d-new-owner-would-2.html#post1330012