Yanmar 165D Kingpin help

[Yanmarmanone]

Hey all, grenaded the king pin on my little Yanmar. When I took it apart there was 2 sealed bearings, 2 wrist pin bearings, 2 non sealed bearings, about a 3” spacer and a gear. I’ve tried looking at manuals online but can not find one specific to a YM165D. Can anyone tell me where these bearing go on the shaft so I can get the tractor going again.
Thank you

 

[winston1]

Box

app.box.com

 

[bmaverick]

Hey all, grenaded the king pin on my little Yanmar. When I took it apart there was 2 sealed bearings, 2 wrist pin bearings, 2 non sealed bearings, about a 3” spacer and a gear. I’ve tried looking at manuals online but can not find one specific to a YM165D. Can anyone tell me where these bearing go on the shaft so I can get the tractor going again.
Thank you

At the link, search for all the YM165 manuals.

 

[bmaverick]

Hey all, grenaded the king pin on my little Yanmar. When I took it apart there was 2 sealed bearings, 2 wrist pin bearings, 2 non sealed bearings, about a 3” spacer and a gear. I’ve tried looking at manuals online but can not find one specific to a YM165D. Can anyone tell me where these bearing go on the shaft so I can get the tractor going again.
Thank you

So, are any parts actually broken or did they just fall apart under loaded pressure?

Kingpins are getting rare these days, however some of the members at the Yanmar Tractor Owners Group have found replacements from other CUT machines Yanmar made for other brand companies. Thus, it's possible to find replacement parts if you do your homework.

 

[Yanmarmanone]

Box

app.box.com

This says the link is invalid!

 

[Yanmarmanone]

So, are any parts actually broken or did they just fall apart under loaded pressure?

Kingpins are getting rare these days, however some of the members at the Yanmar Tractor Owners Group have found replacements from other CUT machines Yanmar made for other brand companies. Thus, it's possible to find replacement parts if you do your homework.

Only the kingpin broke which I had another one machined just need to know which order the bearings go back on the shaft to put it back together!

 

[Yanmarmanone]

Found what I needed after downloading the “box” app. Thank you so much folks this will get me back up and going! Much appreciated!

 

[Williy]

get a parts manual for $15 Yanmar YM165, YM165D Tractor Parts Manual DOWNLOAD - Tradebit

willy

 

[bmaverick]

get a parts manual for $15 Yanmar YM165, YM165D Tractor Parts Manual DOWNLOAD - Tradebit

willy

Actually he can get one for FREE. Winston provided the link already.