XR4046H ? and observations

   / XR4046H ? and observations #1  

hd5

Silver Member
Joined
Apr 17, 2009
Messages
116
Location
Missouri
Tractor
MF2705, MF135 XR4046H
My other diesel tractor needs to sit and idle for a few minutes if running hard before you kill the engine,been told to do that so the turbo doesn't gunk up. Is this the same? Wasn't expecting this one to just shut off with the key.

My parking brake only beeps 4or 5 times when I get off either running or turned off. Does not bother me,but I am pretty deaf.
Top link pin is to short, telescoping lift arms save your back. I thought the arms and top link were too short when I first went too hook up implement. It turns out, it fits nice and compactly close to the tractor.
Taking your foot off the hst pedal abruptly does give you a "shock" just like the owners manual says. I thought it was funny the way they worded it. Reading the owners manual is amusing, somewhat on its own.
 
   / XR4046H ? and observations
  • Thread Starter
#2  
Skip the idle question, just found it in the owners manual. It's the same as before. Let it idle for five minutes before turning off, otherwise engine life will be reduced. It's says after hard work. I always had trouble deciding if it was working hard or not.
 

Tractor & Equipment Auctions

(NEW) 2025 DOWN 2 EARTH GOOSENECK TRAILER (A51247)
(NEW) 2025 DOWN 2...
KUBOTA RTV X1100C UTV (A51406)
KUBOTA RTV X1100C...
2000 GROVE RT640E MOBILE CRANE (A51406)
2000 GROVE RT640E...
UNUSED PROFESSIONAL X2600A ELECTRIC CONCRETE MIXER (A54757)
UNUSED...
UNUSED LANDHONOR 82" FORK EXTENSIONS (A54757)
UNUSED LANDHONOR...
2008 CATERPILLAR 272C SKID STEER (A52705)
2008 CATERPILLAR...
 
Top