I have had my tractor regen forced by computer one time bc the power had cut down. Recently I killed the tractor very early in the regen phase and it will still start but dies between 3-18 minutes seemingly depending on how long it has set. The regen light has been on all the time that I have been “working” on it trying to see if it will stay running. It still dies. Is this bc I killed it after it had just began to regen?
XG3037
- Thread starter Serpico
- Start date
- Views: 1044
TimberFarm
Platinum Member
- Joined
- Apr 13, 2022
- Messages
- 591
- Tractor
- John Deere 3203, Jinma 354 LE, LS MT573
Does your tractor have the regen cancel button?
I have a switch that if the regen starts, I can hit the switch and it will cancel it and then start regen later on again.
I have a switch that if the regen starts, I can hit the switch and it will cancel it and then start regen later on again.
Cycledude
Veteran Member
- Joined
- Nov 26, 2020
- Messages
- 1,466
- Location
- Rib Lake Wisconsin
- Tractor
- LS XR4155, Ford 6610, Ford 8n
How many hours on your tractor ?
You are asking about your XG3037 ?
Might be helpful to see a picture of the dash after this problem starts.
When your tractor is attempting to regenerate what RPM are you running the engine at ?
My LS XR4155 has nearly 400 trouble free hours.
You are asking about your XG3037 ?
Might be helpful to see a picture of the dash after this problem starts.
When your tractor is attempting to regenerate what RPM are you running the engine at ?
My LS XR4155 has nearly 400 trouble free hours.
alexsbuddy
Gold Member
- Joined
- Mar 10, 2016
- Messages
- 332
- Location
- Diamond, MO
- Tractor
- LS XG3037 w/ LS LL3109 FEL Kodiak SD5 Mower, Speeco Model 65 PHD, Bush Hog BX-600 Box Blade, Titan 42" Skid Steer Pallet Fork/Hay Spear Combo
I have an XG3037 and have inadvertently turned it off during a regen a few times and it simply restarted the process after restarting it. No issues from prematurely stopping the regen process.
You might try resetting the ECM by disconnecting the pos and neg cables, let it sit for 30 minutes, reconnecting the battery cables, and starting the tactor and see what happens.
You might try resetting the ECM by disconnecting the pos and neg cables, let it sit for 30 minutes, reconnecting the battery cables, and starting the tactor and see what happens.