Wrench for removing Kubota water separator

[BufordBoone]

2018 M7060 - In replacing the fuel filter and cleaning the water separator, I noticed things are "tight". Not a lot of room to move around. I was able to get the (spin on) fuel filter changed by using a standard "Band" filter wrench.

I was unable to get the water separator unscrewed. Couldn't get a purchase on it.

I tried a pair of channel locks but was afraid I'd damage the plastic.

Any suggestions for the proper wrench to purchase to get that separator body unscrewed?

Also, although the std. filter wrench worked on the fuel filter, any better recommendations?

Thanks.

 

[RjCorazza]

I've always used channel locks or a strap type wrench with a soft rubber strap. A chain wrench is also a good choice to try.
The plastic bowl on my aftermarket sediment filter comes off easy enough with the rubber strap wrench stretched tight, and a hard rap.

 

[WranglerX]

Might try worm type hose clamp as a "gripping point" for channel locks or such tool......

 

[bdhsfz6]

I use this one:

Kubota #77700-03661 Small Oil Filter Wrench

Size: Small Filter Diameter: 2-13/16" to 3-5/32" (71.4 mm to 80.2 mm) Features a swivel handle which allows users to get to filters in hard-to-reach areas Wide dimpled band securely grips filters without crushing Cushion grip vinyl handle

www.messicks.com

I line it with friction tape to better grip the plastic and minimize the chance of damage.

Depending on the model, this one may also fit:

Kubota Fuel Filter Wrench Keychain

PLEASE REVIEW THE IMAGES PROVIDED ALONGSIDE YOUR FUEL FILTER HOUSING TO COMPARE FITMENT / COMPATIBILITY ***Please note that Kubota is continually updating and changing their products, we work hard and do our best to stay up to date on any changes. Depending on the year and model of your tractor...

lownperformance.com

 

[BufordBoone]

I use this one:

Kubota #77700-03661 Small Oil Filter Wrench

Size: Small Filter Diameter: 2-13/16" to 3-5/32" (71.4 mm to 80.2 mm) Features a swivel handle which allows users to get to filters in hard-to-reach areas Wide dimpled band securely grips filters without crushing Cushion grip vinyl handle

www.messicks.com

I line it with friction tape to better grip the plastic and minimize the chance of damage.

Depending on the model, this one may also fit:

Kubota Fuel Filter Wrench Keychain

PLEASE REVIEW THE IMAGES PROVIDED ALONGSIDE YOUR FUEL FILTER HOUSING TO COMPARE FITMENT / COMPATIBILITY ***Please note that Kubota is continually updating and changing their products, we work hard and do our best to stay up to date on any changes. Depending on the year and model of your tractor...

lownperformance.com

Thanks. I have similar but the area is too tight for it with all the hoses, etc. from the loader.

Just a very tight area.

I'll look at the above recommendations and something will work out.

Thanks, to all that have given suggestions. I love this place.